PCE-MA 110 is a halogen moisture test instrument or analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the moisture analyzer can be performed at any time using the automatic calibration function and the included 100 g weight.

• Weighing range: 0.1 g … 110 g / 0.0035 … 3.88 oz
• Weighing resolution or readability: 0.01 g / 10 mg
• Moisture content measuring range: 0 … 100%
• Moisture content resolution or readability: 0.1%
• Adjustable drying time and temperature
• Memory stores up to 16 drying profiles

The moisture meter PCE-MA 202 allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the moisture meter dries the material to be weighed, and then calculates the moisture content from the weight difference.

• Testing or weighing capacity: 200 g / 7.05 oz
• Readability: 10 mg / 0.01 g / 0.1%
• Adjustable drying temperature and time

The moisture meter PCE-MA 100 allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by a halogen lamp up to 199 °C. In this chamber, the moisture meter dries the material to be weighed, and then calculates the moisture content from the weight difference.

• Testing or weighing capacity: 110 g / 3.88 oz
• Readability: 1 mg / 0.001 g / 0.01 %
• Adjustable drying temperature and time

PCE-MA 110 is a halogen moisture meter or analyzer that functions on the gravimetric or loss on drying (LOD) principle. The moisture analyzer uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the moisture analyzer can be performed at any time using the automatic calibration function and the included 100 g weight.

• Weighing range: 0.1 g … 110 g / 0.0035 … 3.88 oz
• Weighing resolution or readability: 0.01 g / 10 mg
• Moisture content measuring range: 0 … 100%
• Moisture content resolution or readability: 0.1%
• Adjustable drying time and temperature
• Memory stores up to 16 drying profiles
• RS-232 interface or port

The humidity detector is an oven-drying absolute moisture meter for weighing and heating material samples to determine moisture content. The heating chamber warms up to 199 °C / 390 °F with the use of halogen lamps. Drying of the sample to be weighed takes place within the chamber of the humidity detector and the moisture content is subsequently calculated from the difference between the initial and final weight.

• Testing or weighing capacity: 200 g / 7.05 oz
• Readability: 10 mg / 0.01 g / 0.1%
• Adjustable drying temperature and time

The force gage PCE-DFG N 20K measures both tensile forces and compressive forces with a very high resolution and sampling rate. The force gage helps to determine the yield strengths, the tear-off force and is used wherever acting forces have to be documented.

• Measuring range: 0 … 20 kN / 20,000 N
• Resolution: 0.002 kN / 2 N
• Accuracy: ± 0.2% of the measuring range
• Memory for 100 measurements
• USB interface
• Graphic display

The humidity detector allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the humdity detector dries the material to be weighed, and then calculates the moisture content from the weight difference.

• Testing or weighing capacity: 110 g / 3.88 oz
• Readability: 1 mg / 0.001 g / 0.01 %
• Adjustable drying temperature and time