Query results | PCE Instruments

Condition Monitoring Material Thickness Meter PCE-TG 300-NO5/90

US$ 1,590.00

ex. VAT, ex. delivery costs

The PCE-TG 300-NO5/90 is a condition monitoring material thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the condition monitoring material thickness meter. Wall thicknesses under a coating can also be measured with the condition monitoring material thickness meter.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth

IoT Meter PCE-TG 300-NO5/90

US$ 1,590.00

ex. VAT, ex. delivery costs

The PCE-TG 300-NO5/90 is an IoT meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the IoT meter. Wall thicknesses under a coating can also be measured with the IoT meter.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth

Material Tester PCE-TG 300-NO5/90

US$ 1,590.00

ex. VAT, ex. delivery costs

The PCE-TG 300-NO5/90 is a material tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material tester. Wall thicknesses under a coating can also be measured with the material tester.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth

Material Thickness Meter PCE-TG 300-NO5/90

US$ 1,590.00

ex. VAT, ex. delivery costs

The PCE-TG 300-NO5/90 is a material thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material thickness meter. Wall thicknesses under a coating can also be measured with the material thickness meter.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth

NDT Test Instrument PCE-TG 300-NO5/90

US$ 1,590.00

ex. VAT, ex. delivery costs

The PCE-TG 300-NO5/90 is an NDT test instrument for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the NDT test instrument. Wall thicknesses under a coating can also be measured with the NDT test instrument.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth

Paint Thickness Tester PCE-TG 300-NO5/90

US$ 1,590.00

ex. VAT, ex. delivery costs

The PCE-TG 300-NO5/90 is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth

Thickness Gauge PCE-TG 300-NO5/90

US$ 1,590.00

ex. VAT, ex. delivery costs

The PCE-TG 300-NO5/90 is a thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness gauge. Wall thicknesses under a coating can also be measured with the thickness gauge.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth

Thickness Meter PCE-TG 300-NO5/90

US$ 1,590.00

ex. VAT, ex. delivery costs

The PCE-TG 300-NO5/90 is a thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the thickness meter.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth

Ultrasonic testing device PCE-TG 300-NO5/90

US$ 1,590.00

ex. VAT, ex. delivery costs

The PCE-TG 300-NO5/90 is an Ultrasonic testing device for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the Ultrasonic testing device. Wall thicknesses under a coating can also be measured with the Ultrasonic testing device.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth

Ultrasonic Thickness Gauge PCE-TG 300-NO5/90

US$ 1,590.00

ex. VAT, ex. delivery costs

The PCE-TG 300-NO5/90 is an ultrasonic thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness gauge. Wall thicknesses under a coating can also be measured with the ultrasonic thickness gauge.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth

Ultrasonic Thickness Tester PCE-TG 300-NO5/90

US$ 1,590.00

ex. VAT, ex. delivery costs

The PCE-TG 300-NO5/90 is an ultrasonic thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness tester. Wall thicknesses under a coating can also be measured with the ultrasonic thickness tester.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth

Wall Thickness Meter PCE-TG 300-NO5/90

US$ 1,590.00

ex. VAT, ex. delivery costs

The PCE-TG 300-NO5/90 is a wall thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the wall thickness meter. Wall thicknesses under a coating can also be measured with the wall thickness meter.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth

Force Gage PCE-DFG N 50K

US$ 1,584.00

ex. VAT, ex. delivery costs

The force gage PCE-DFG N 50K measures both tensile forces and compressive forces with a very high resolution and sampling rate. The force gage helps to determine the yield strengths, the tear-off force, and is used wherever acting forces have to be documented.

Measuring range: 0 … 50 kN / 50,000 N
Resolution: 5 N
Accuracy: ± 0.2% of the measuring range
Memory for 100 measurements
USB interface
Graphic display

Force Gauge / Digital Force Gauge PCE-DFG N 50K

US$ 1,584.00

ex. VAT, ex. delivery costs

The Force Gauge / Digital Force Gauge PCE-DFG N 50K measures both tensile forces and compressive forces with a very high resolution and sampling rate. The Force Gauge / Digital Force Gauge helps to determine the yield strengths, the tear-off force and is used wherever acting forces have to be documented.

Measuring range: 0 … 50 kN / 50,000 N
Resolution: 5 N
Accuracy: ± 0.2% of the measuring range
Memory for 100 measurements
USB interface
Graphic display

Accelerometer PCE-VT 3750

US$ 1,575.00

ex. VAT, ex. delivery costs

The accelerometer is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This accelerometer shows the vibration acceleration, vibration velocity and vibration displacement directly on the display. The measurement unit can be switched between the metric system and imperial units.

Measuring ranges

Acceleration: 0.0 - 399.9 m/s² / 0.0 - 15744 in/s²
Velocity: 0.00 - 399.99 mm/s / 0.00 - 15.74 in/s
Displacement: 0.000 - 3.9 mm / 0.000 - 0.154 in
Automatic ISO 10816-3 evaluation
Colored graphic display

incl. headset

Condition Monitoring Vibration Meter PCE-VT 3750

US$ 1,575.00

ex. VAT, ex. delivery costs

The condition monitoring vibration meter is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This condition monitoring vibration meter shows the vibration acceleration, vibration velocity and vibration displacement directly on the display. The measurement unit can be switched between the metric system and imperial units.

Measuring ranges

Acceleration: 0.0 - 399.9 m/s² / 0.0 - 15744 in/s²
Velocity: 0.00 - 399.99 mm/s / 0.00 - 15.74 in/s
Displacement: 0.000 - 3.9 mm / 0.000 - 0.154 in
Automatic ISO 10816-3 evaluation
Colored graphic display

incl. headset

HVAC Meter PCE-VT 3750

US$ 1,575.00

ex. VAT, ex. delivery costs

The HVAC meter is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This HVAC meter shows the vibration acceleration, vibration velocity and vibration displacement directly on the display. The measurement unit can be switched between the metric system and imperial units.

Measuring ranges

Acceleration: 0.0 - 399.9 m/s² / 0.0 - 15744 in/s²
Velocity: 0.00 - 399.99 mm/s / 0.00 - 15.74 in/s
Displacement: 0.000 - 3.9 mm / 0.000 - 0.154 in
Automatic ISO 10816-3 evaluation
Colored graphic display

incl. headset

Vibration Analyzer PCE-VT 3750

US$ 1,575.00

ex. VAT, ex. delivery costs

The vibration analyzer is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This vibration analyzer shows the vibration acceleration, vibration velocity and vibration displacement directly on the display. The measurement unit can be switched between the metric system and imperial units.

Measuring ranges

Acceleration: 0.0 - 399.9 m/s² / 0.0 - 15744 in/s²
Velocity: 0.00 - 399.99 mm/s / 0.00 - 15.74 in/s
Displacement: 0.000 - 3.9 mm / 0.000 - 0.154 in
Automatic ISO 10816-3 evaluation
Colored graphic display

incl. headset

Vibration Meter PCE-VT 3750

US$ 1,575.00

ex. VAT, ex. delivery costs

The vibration meter is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This vibration meter shows the vibration acceleration, vibration velocity and vibration displacement directly on the display. The measurement unit can be switched between the metric system and imperial units.

Measuring ranges

Acceleration:
0.0 - 399.9 m/s² / 0.0 - 15744 in/s²
Velocity:
0.00 - 399.99 mm/s / 0.00 - 15.74 in/s
Displacement:
0.000 - 3.9 mm / 0.000 - 0.154 in
Automatic ISO 10816-3 evaluation
Colored graphic display
incl. headset

Air Quality Meter Gasman-PH3 "Phosphine"

US$ 1,560.00

ex. VAT, ex. delivery costs

The Air Quality Meter Gasman-PH3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Air Quality Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Air Quality Meter fulfills all the European and international norms, even ATEX and UL standards.

Non-rechargeable, 1-year battery
For PH₃ (Phosphine)
Dust and water resistant - IP 65/67
0 … 5 ppm

Automotive Tester PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate

US$ 1,560.00

ex. VAT, ex. delivery costs

The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"- incl. ISO-Calibration Certificate

Car Measuring Device PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate

US$ 1,560.00

ex. VAT, ex. delivery costs

The car measuring device is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the car measuring device, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Coating Thickness Gauge PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate

US$ 1,560.00

ex. VAT, ex. delivery costs

The coating thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the coating thickness gauge, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Electromagnetic Field Meter LM-MP1000-A2

US$ 1,560.00

ex. VAT, ex. delivery costs

The handy Electromagnetic Field Meter with external axial field probe precisely measures magnetic fields of all kinds - direct fields, alternating fields and pulsed fields. The Electromagnetic Field Meter is also ideal for measuring residual magnetism. Operation is particularly simple: a single push of a button is all it takes to precisely record magnetic field strengths. The measuring range extends from weak geomagnetic fields up to 20,000 A/cm strong fields.

Measuring range up to 20,000 A/cm
Axial magnetic field probe
AC, DC and pulse measurements
Measurement of residual magnetism possible

Electromagnetic Field Meter LM-MP1000-T2

US$ 1,560.00

ex. VAT, ex. delivery costs

The handy Electromagnetic Field Meter with external transverse field probe accurately measures magnetic fields of all kinds, such as direct fields, alternating fields and pulsed fields. The Electromagnetic Field Meter is also ideally suited for residual magnetism. The universal device is easy to operate: A single push of a button is all it takes to precisely measure magnetic field strengths. The application range extends from weak geomagnetic fields up to 20,000 A/cm strong fields.

Measuring range up to 20,000 A/cm
Transverse field probe
AC, DC and pulse measurements
Measurement of residual magnetism possible

Electromagnetic Field Meter LM-MP1000-Z2

US$ 1,560.00

ex. VAT, ex. delivery costs

The handy Electromagnetic Field Meter with transverse tongue probe accurately measures magnetic fields of all kinds - direct fields, alternating fields and pulsed fields. The device is also ideal for measuring residual magnetism. The Electromagnetic Field Meter is easy to operate: A single push of a button is all it takes to precisely measure magnetic field strengths. The application range extends from weak geomagnetic fields up to 20,000 A/cm strong fields.

Measuring range up to 20,000 A/cm
Transverse tongue probe
AC, DC and pulse measurements
Measurement of residual magnetism possible

EMF measuring device / EMF test device LM-MP1000-A2

US$ 1,560.00

ex. VAT, ex. delivery costs

The handy EMF measuring device / EMF test device with external axial field probe precisely measures magnetic fields of all kinds - direct fields, alternating fields and pulsed fields. The EMF measuring device / EMF test device is also ideal for measuring residual magnetism. Operation is particularly simple: a single push of a button is all it takes to precisely record magnetic field strengths. The measuring range extends from weak geomagnetic fields up to 20,000 A/cm strong fields.

Measuring range up to 20,000 A/cm
Axial magnetic field probe
AC, DC and pulse measurements
Measurement of residual magnetism possible

EMF measuring device / EMF test device LM-MP1000-T2

US$ 1,560.00

ex. VAT, ex. delivery costs

The handy EMF measuring device / EMF test device with external transverse field probe accurately measures magnetic fields of all kinds, such as direct fields, alternating fields and pulsed fields. The EMF measuring device / EMF test device is also ideally suited for residual magnetism. The universal device is easy to operate: A single push of a button is all it takes to precisely measure magnetic field strengths. The application range extends from weak geomagnetic fields up to 20,000 A/cm strong fields.

Measuring range up to 20,000 A/cm
Transverse field probe
AC, DC and pulse measurements
Measurement of residual magnetism possible

EMF measuring device / EMF test device LM-MP1000-Z2

US$ 1,560.00

ex. VAT, ex. delivery costs

The handy EMF measuring device / EMF test device with transverse tongue probe accurately measures magnetic fields of all kinds - direct fields, alternating fields and pulsed fields. The device is also ideal for measuring residual magnetism. The EMF measuring device / EMF test device is easy to operate: A single push of a button is all it takes to precisely measure magnetic field strengths. The application range extends from weak geomagnetic fields up to 20,000 A/cm strong fields.

Measuring range up to 20,000 A/cm
Transverse tongue probe
AC, DC and pulse measurements
Measurement of residual magnetism possible

Environmental Meter LM-MP1000-A2

US$ 1,560.00

ex. VAT, ex. delivery costs

The handy Environmental Meter with external axial field probe precisely measures magnetic fields of all kinds - direct fields, alternating fields and pulsed fields. The Environmental Meter is also ideal for measuring residual magnetism. Operation is particularly simple: a single push of a button is all it takes to precisely record magnetic field strengths. The measuring range extends from weak geomagnetic fields up to 20,000 A/cm strong fields.

Measuring range up to 20,000 A/cm
Axial magnetic field probe
AC, DC and pulse measurements
Measurement of residual magnetism possible

Environmental Meter LM-MP1000-T2

US$ 1,560.00

ex. VAT, ex. delivery costs

The handy Environmental Meter with external transverse field probe accurately measures magnetic fields of all kinds, such as direct fields, alternating fields and pulsed fields. The Environmental Meter is also ideally suited for residual magnetism. The universal device is easy to operate: A single push of a button is all it takes to precisely measure magnetic field strengths. The application range extends from weak geomagnetic fields up to 20,000 A/cm strong fields.

Measuring range up to 20,000 A/cm
Transverse field probe
AC, DC and pulse measurements
Measurement of residual magnetism possible

Environmental Meter LM-MP1000-Z2

US$ 1,560.00

ex. VAT, ex. delivery costs

The handy Environmental Meter with transverse tongue probe accurately measures magnetic fields of all kinds - direct fields, alternating fields and pulsed fields. The device is also ideal for measuring residual magnetism. The Environmental Meter is easy to operate: A single push of a button is all it takes to precisely measure magnetic field strengths. The application range extends from weak geomagnetic fields up to 20,000 A/cm strong fields.

Measuring range up to 20,000 A/cm
Transverse tongue probe
AC, DC and pulse measurements
Measurement of residual magnetism possible

Environmental Tester LM-MP1000-A2

US$ 1,560.00

ex. VAT, ex. delivery costs

The handy Environmental Tester with external axial field probe precisely measures magnetic fields of all kinds - direct fields, alternating fields and pulsed fields. The Environmental Tester is also ideal for measuring residual magnetism. Operation is particularly simple: a single push of a button is all it takes to precisely record magnetic field strengths. The measuring range extends from weak geomagnetic fields up to 20,000 A/cm strong fields.

Measuring range up to 20,000 A/cm
Axial magnetic field probe
AC, DC and pulse measurements
Measurement of residual magnetism possible

Environmental Tester LM-MP1000-T2

US$ 1,560.00

ex. VAT, ex. delivery costs

The handy Environmental Tester with external transverse field probe accurately measures magnetic fields of all kinds, such as direct fields, alternating fields and pulsed fields. The Environmental Tester is also ideally suited for residual magnetism. The universal device is easy to operate: A single push of a button is all it takes to precisely measure magnetic field strengths. The application range extends from weak geomagnetic fields up to 20,000 A/cm strong fields.

Measuring range up to 20,000 A/cm
Transverse field probe
AC, DC and pulse measurements
Measurement of residual magnetism possible

Environmental Tester LM-MP1000-Z2

US$ 1,560.00

ex. VAT, ex. delivery costs

The handy Environmental Tester with transverse tongue probe accurately measures magnetic fields of all kinds - direct fields, alternating fields and pulsed fields. The device is also ideal for measuring residual magnetism. The Environmental Tester is easy to operate: A single push of a button is all it takes to precisely measure magnetic field strengths. The application range extends from weak geomagnetic fields up to 20,000 A/cm strong fields.

Measuring range up to 20,000 A/cm
Transverse tongue probe
AC, DC and pulse measurements
Measurement of residual magnetism possible

Gas Detector Gasman-PH3 "Phosphine"

US$ 1,560.00

ex. VAT, ex. delivery costs

The Gas Detector Gasman-PH3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Detector fulfills all the European and international norms, even ATEX and UL standards.

Non-rechargeable, 1-year battery
For PH₃ (Phosphine)
Dust and water resistant - IP 65/67
0 … 5 ppm