1. You are here:
  2. Home
  3. Query results
Digital Force Gauge PCE-DFG 1K X
Digital Force Gauge PCE-DFG 1K X
US$ 1,510.00
ex. VAT, ex. delivery costs
The digital force gauge records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The digital force gauge is supplied with an external measuring cell and can measure forces of up to 1,000 N.

  • Measuring range: 0 … 1000 N
  • Resolution: 0.5 N
  • Accuracy: ±0.05 % rdg.
  • Measuring rate: 1 … 7,200 Hz
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
Details
Dynamometer PCE-DFG 2K5 X
Dynamometer PCE-DFG 2K5 X
US$ 1,510.00
ex. VAT, ex. delivery costs
The dynamometer records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces of up to 2,500 N.

  • Measuring range: 0 … 2500 N
  • Resolution: 1 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 … 7,200 Hz
Details
Dynamometer PCE-DFG 2K5 X
Dynamometer PCE-DFG 2K5 X
US$ 1,510.00
ex. VAT, ex. delivery costs
The dynamometer records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces of up to 2,500 N.

  • Measuring range: 0 … 2500 N
  • Resolution: 1 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 … 7,200 Hz
Details
Force Gage PCE-DFG 1K X
Force Gage PCE-DFG 1K X
US$ 1,510.00
ex. VAT, ex. delivery costs
The force gauge records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The force gauge is supplied with an external measuring cell and can measure forces of up to 1,000 N.

  • Measuring range: 0 … 1000 N
  • Resolution: 0.5 N
  • Accuracy: ±0.05 % rdg.
  • Measuring rate: 1 … 7,200 Hz
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
Details
Gas Detector TCgard for CO2
Gas Detector TCgard for CO2
US$ 1,510.00
ex. VAT, ex. delivery costs

Single-Gas Gas Detector warning for gases (for Carbon Dioxide CO2), / without display / with signal output for sensors in combination with a stationary equipment to detect gases (with ATEX approval).


  • Stationary
  • For Carbon Dioxide CO2
  • Additional display and alarm station
  • ATEX approved

Details
Gas Leak Detector TCgard-CO2
Gas Leak Detector TCgard-CO2
US$ 1,510.00
ex. VAT, ex. delivery costs

Single-Gas Gas Leak Detector warning for gases (for Carbon Dioxide CO2), / without display / with signal output for sensors in combination with a stationary equipment to detect gases (with ATEX approval).


  • Stationary
  • For Carbon Dioxide CO2
  • Additional display and alarm station
  • ATEX approved

Details
Agricultural measuring device PCE-TUM 50
Agricultural measuring device PCE-TUM 50
US$ 1,505.00
ex. VAT, ex. delivery costs
The Agricultural measuring device PCE-TUM 50 is a portable device for measuring turbidity according to ISO 7027. This allows the user to quickly and easily determine important water parameters with the Agricultural measuring device and to check the quality of drinking water and waste water.

  • Measurement method: ISO 7027 (90°)
  • Measuring ranges:
    0 … 2000 NTU
    0 … 500 EBC
    0 … 9999 ASBC
  • 3 measuring unitsTurbidity calibration up to 7 points
Details
Coating Thickness Gauge PCE-CT 80HP-FN0D5-ICA incl. ISO-Calibration Certificate
Coating Thickness Gauge PCE-CT 80HP-FN0D5-ICA incl. ISO-Calibration Certificate
US$ 1,505.00
ex. VAT, ex. delivery costs
ISO Calibration
The material tester can reliably determine the thicknessHigh Accuracy of, for example, plastics, paints and other coatings on ferrous and non-ferrous metals. With a measuring range of up to 5000 µm on ferrous metals, the material tester covers a wide range of measuring tasks.

  • Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
  • Accuracy after foil calibration: ±(1.0 % of measured value + 0.5 µm)
  • Data memory for 2000 readings
  • Fe substrates such as: steel and iron
  • NFe substances such as: aluminum and copper
  • Practical V-groove on the measuring heads
  • incl. ISO-Calibration Certificate
Details
Coating Thickness Gauge PCE-CT 80HP-FN3-ICA incl. ISO-Calibration Certificate
Coating Thickness Gauge PCE-CT 80HP-FN3-ICA incl. ISO-Calibration Certificate
US$ 1,505.00
ex. VAT, ex. delivery costs
ISO Calibration
The material thickness meter can reliably determine the thicknessHigh Accuracy of, for example, plastics, paints and other coatings on ferrous and non-ferrous metals. With a measuring range of up to 5000 µm on ferrous metals, the material thickness meter covers a wide range of measuring tasks.

  • Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(1.0 % of measured value + 1 µm)
  • Data memory for 2000 readings
  • Fe substrates such as: steel and iron
  • NFe substances such as: aluminum and copper
  • Practical V-groove on the measuring heads
  • incl. ISO-Calibration Certificate
Details