Zum Hauptinhalt springen
  1. You are here:
  2. Home
  3. Products for 'Condutivímetro PCE PH 25 '
pH Meter PCE-PH 23
pH Meter PCE-PH 23
US$ 135.00
ex. VAT, ex. delivery costs
The pH meter PCE-PH 23 is used for rapid fluid analysis. The pH meter offers the possibility of determining the temperature and the pH value. The operation of the pH meter PCE-PH 23 is carried out via the four front-mounted buttons.

  • Measuring range pH measurement: 0.00 … 14.00 pH
  • Resolution pH measurement: 0.01 pH
  • Measurement accuracy pH measurement: ± 0.02 pH ± 1 digit
  • Graphic display
  • 1-, 2- or 3-point calibration
  • Four front panel buttons
  • Memory (Save & Recall)
Details
pH Meter PCE-PH 18
pH Meter PCE-PH 18
US$ 127.00
ex. VAT, ex. delivery costs
The pH meter PCE-PH 18 is a pH meter with a pointed glass electrode. Thanks to this glass electrode, the pH meter PCE-PH 18 in, for example potting soil, sludge or in viscous liquids, such as in a lye, the pH can be determined.

  • Measuring range: 0.00 … 14.00 pH
  • Accuracy: ± 0.1 pH (at 20°C / 68°F), ± 0.2 pH
  • Resolution: 0.01 pH
  • Puncture electrode (soft bottoms)
  • Exchangeable electrode through BNC connection
Details
pH electrode PCE-PH-HTE for non-corrosive media
pH electrode PCE-PH-HTE for non-corrosive media
US$ 138.00
ex. VAT, ex. delivery costs
Special pH electrode for higher temperatures up to 80 °C with BNC connection

  • Laboratory pH electrode
  • Measuring range: 0 ... 14 pH
  • Diameter: 12 mm
  • Temperature range: 0 ... 80 °C
  • Shaft / sensor material: Glass
  • Connection: BNC
  • Application: Aqueous non-corrosive media
Details
Environmental Meter PCE-PH 23
Environmental Meter PCE-PH 23
US$ 135.00
ex. VAT, ex. delivery costs
The environmental meter PCE-PH 23 is used for rapid fluid analysis. The environmental meter offers the possibility of determining the temperature and the pH value. The operation of the environmental meter PCE-PH 23 is carried out via the four front-mounted buttons.

  • Measuring range pH measurement: 0.00 … 14.00 pH
  • Resolution pH measurement: 0.01 pH
  • Measurement accuracy pH measurement: ± 0.02 pH ± 1 digit
  • Graphic display
  • 1-, 2- or 3-point calibration
  • Four front panel buttons
  • Memory (Save & Recall)
Details
Environmental Meter PCE-PH 18
Environmental Meter PCE-PH 18
US$ 127.00
ex. VAT, ex. delivery costs
The environmental meter PCE-PH 18 is a environmental meter with a pointed glass electrode. Thanks to this glass electrode, the environmental meter PCE-PH 18 in, for example potting soil, sludge or in viscous liquids, such as in a lye, the pH can be determined.

  • Measuring range: 0.00 … 14.00 pH
  • Accuracy: ± 0.1 pH (at 20°C / 68°F), ± 0.2 pH
  • Resolution: 0.01 pH
  • Puncture electrode (soft bottoms)
  • Exchangeable electrode through BNC connection
Details
Environmental Tester PCE-PH 23
Environmental Tester PCE-PH 23
US$ 135.00
ex. VAT, ex. delivery costs
The environmental tester PCE-PH 23 is used for rapid fluid analysis. The environmental tester offers the possibility of determining the temperature and the pH value. The operation of the environmental tester PCE-PH 23 is carried out via the four front-mounted buttons.

  • Measuring range pH measurement: 0.00 … 14.00 pH
  • Resolution pH measurement: 0.01 pH
  • Measurement accuracy pH measurement: ± 0.02 pH ± 1 digit
  • Graphic display
  • 1-, 2- or 3-point calibration
  • Four front panel buttons
  • Memory (Save & Recall)
Details
Environmental Tester PCE-PH 18
Environmental Tester PCE-PH 18
US$ 127.00
ex. VAT, ex. delivery costs
The environmental tester PCE-PH 18 is a environmental tester with a pointed glass electrode. Thanks to this glass electrode, the environmental tester PCE-PH 18 in, for example potting soil, sludge or in viscous liquids, such as in a lye, the pH can be determined.

  • Measuring range: 0.00 … 14.00 pH
  • Accuracy: ± 0.1 pH (at 20°C / 68°F), ± 0.2 pH
  • Resolution: 0.01 pH
  • Puncture electrode (soft bottoms)
  • Exchangeable electrode through BNC connection
Details
Water Analysis Meter PCE-PH 23
Water Analysis Meter PCE-PH 23
US$ 135.00
ex. VAT, ex. delivery costs
The water analysis meter PCE-PH 23 is used for rapid fluid analysis. The water analysis meter offers the possibility of determining the temperature and the pH value. The operation of the water analysis meter PCE-PH 23 is carried out via the four front-mounted buttons.

  • Measuring range pH measurement: 0.00 … 14.00 pH
  • Resolution pH measurement: 0.01 pH
  • Measurement accuracy pH measurement: ± 0.02 pH ± 1 digit
  • Graphic display
  • 1-, 2- or 3-point calibration
  • Four front panel buttons
  • Memory (Save & Recall)
Details
Water Analysis Meter PCE-PH 18
Water Analysis Meter PCE-PH 18
US$ 127.00
ex. VAT, ex. delivery costs
The water analysis meter PCE-PH 18 is a water analysis meter with a pointed glass electrode. Thanks to this glass electrode, the water analysis meter PCE-PH 18 in, for example potting soil, sludge or in viscous liquids, such as in a lye, the pH can be determined.

  • Measuring range: 0.00 … 14.00 pH
  • Accuracy: ± 0.1 pH (at 20°C / 68°F), ± 0.2 pH
  • Resolution: 0.01 pH
  • Puncture electrode (soft bottoms)
  • Exchangeable electrode through BNC connection
Details
pH Meter PCE-PHB 10 Especially for Outdoor Use
pH Meter PCE-PHB 10 Especially for Outdoor Use
US$ 142.00
ex. VAT, ex. delivery costs
Wireless
The pH meter with a measuring range of -2… 20 pH is used to analyze liquid samples. Thus, the water quality of swimming pools, lakes or rivers can be determined with the pH meter. The recorded data can be conveniently transferred to your mobile phone via the Bluetooth interface on the pH meter.

  • Measuring range: -2.0 … 20.0 pH
  • Measuring range mV: ± 2000.0 mV
  • Temperature measuring range: 0 … 100°C / 32 … 212°F 
  • Bluetooth interface
  • Free download of the Android app from the store
Details
Standard pH electrode CPC-EPS-1 General applications
Standard pH electrode CPC-EPS-1 General applications
US$ 148.00
ex. VAT, ex. delivery costs
The pH electrode is characterized by a low impedance, a short stabilization time and good linearity at the ends of the measuring range.

  • pH electrode (refillable)
  • Measuring range: 0 ... 14 pH
  • Diameter: 7 mm
  • Temperature range: 0 ... 70 °C
  • Shaft / sensor material: Glass
  • Connection: BNC
  • Application: General applications (liquids)
Details
Heavy-duty pH electrode PE-21 for schools, universities etc.
Heavy-duty pH electrode PE-21 for schools, universities etc.
US$ 123.00
ex. VAT, ex. delivery costs
Features Professional and heavy-duty pH electrode for industrial use, available for on-site pH monitoring.

  • Professional pH electrode
  • Measuring range: 0 ... 14 pH
  • Diameter: 26.5 mm
  • Temperature range: 0 ... 95 °C
  • Shaft / sensor material: PPS
  • Connection: BNC
  • Application: Water treatment, aquariums etc.
Details
Environmental Meter PCE-PHB 10 Especially for Outdoor Use
Environmental Meter PCE-PHB 10 Especially for Outdoor Use
US$ 142.00
ex. VAT, ex. delivery costs
Wireless
The environmental meter with a measuring range of -2… 20 pH is used to analyze liquid samples. Thus, the water quality of swimming pools, lakes or rivers can be determined with the environmental meter. The recorded data can be conveniently transferred to your mobile phone via the Bluetooth interface on the environmental meter.

  • Measuring range: -2.0 … 20.0 pH
  • Measuring range mV: ± 2000.0 mV
  • Temperature measuring range: 0 … 100°C / 32 … 212°F 
  • Bluetooth interface
  • Free download of the Android app from the store
Details
IoT Sensor PCE-PHB 10 Especially for Outdoor Use
IoT Sensor PCE-PHB 10 Especially for Outdoor Use
US$ 142.00
ex. VAT, ex. delivery costs
Wireless
The IoT sensor with a measuring range of -2… 20 pH is used to analyze liquid samples. Thus, the water quality of swimming pools, lakes or rivers can be determined with the IoT sensor. The recorded data can be conveniently transferred to your mobile phone via the Bluetooth interface on the IoT sensor.

  • Measuring range: -2.0 … 20.0 pH
  • Measuring range mV: ± 2000.0 mV
  • Temperature measuring range: 0 … 100°C / 32 … 212°F 
  • Bluetooth interface
  • Free download of the Android app from the store
Details
Water Analysis Meter PCE-PHB 10 Especially for Outdoor Use
Water Analysis Meter PCE-PHB 10 Especially for Outdoor Use
US$ 142.00
ex. VAT, ex. delivery costs
Wireless
The water analysis meter with a measuring range of -2… 20 pH is used to analyze liquid samples. Thus, the water quality of swimming pools, lakes or rivers can be determined with the water analysis meter. The recorded data can be conveniently transferred to your mobile phone via the Bluetooth interface on the water analysis meter.

  • Measuring range: -2.0 … 20.0 pH
  • Measuring range mV: ± 2000.0 mV
  • Temperature measuring range: 0 … 100°C / 32 … 212°F 
  • Bluetooth interface
  • Free download of the Android app from the store
Details
Environmental Tester PCE-PHB 10 Especially for Outdoor Use
Environmental Tester PCE-PHB 10 Especially for Outdoor Use
US$ 142.00
ex. VAT, ex. delivery costs
Wireless
The environmental tester with a measuring range of -2… 20 pH is used to analyze liquid samples. Thus, the water quality of swimming pools, lakes or rivers can be determined with the environmental tester. The recorded data can be conveniently transferred to your mobile phone via the Bluetooth interface on the environmental tester.

  • Measuring range: -2.0 … 20.0 pH
  • Measuring range mV: ± 2000.0 mV
  • Temperature measuring range: 0 … 100°C / 32 … 212°F 
  • Bluetooth interface
  • Free download of the Android app from the store
Details
Panel Meter PCE-N25S
Panel Meter PCE-N25S
US$ 125.00
ex. VAT, ex. delivery costs
The panel meter is used for processing standardised signals. Depending on your specific needs, the panel meter can be ordered with different inputs, such as 0…20 mA, 4…20 mA, 0…60 mV, 0…10 V, ±60 mV or ±10 V. The input signal of the panel meter is freely scalable, which increases its application possibilities.

  • IP65 protected at the front
  • 6 different standardised signal inputs available
  • configuration via software
  • 5-digit LED display

Details
Power Indicator PCE-N25S
Power Indicator PCE-N25S
US$ 125.00
ex. VAT, ex. delivery costs
The power indicator is used for processing standardised signals. Depending on your specific needs, the power indicator can be ordered with different inputs, such as 0…20 mA, 4…20 mA, 0…60 mV, 0…10 V, ±60 mV or ±10 V. The input signal of the power indicator is freely scalable, which increases its application possibilities.

  • IP65 protected at the front
  • 6 different standardised signal inputs available
  • configuration via software
  • 5-digit LED display

Details
Temperature Indicator PCE-N25S
Temperature Indicator PCE-N25S
US$ 125.00
ex. VAT, ex. delivery costs
The temperature indicator is used for processing standardised signals. Depending on your specific needs, the temperature indicator can be ordered with different inputs, such as 0…20 mA, 4…20 mA, 0…60 mV, 0…10 V, ±60 mV or ±10 V. The input signal of the temperature indicator is freely scalable, which increases its application possibilities.

  • IP65 protected at the front
  • 6 different standardised signal inputs available
  • configuration via software
  • 5-digit LED display

Details
Frequency Indicator PCE-N25S
Frequency Indicator PCE-N25S
US$ 125.00
ex. VAT, ex. delivery costs
The frequency indicator is used for processing standardised signals. Depending on your specific needs, the frequency indicator can be ordered with different inputs, such as 0…20 mA, 4…20 mA, 0…60 mV, 0…10 V, ±60 mV or ±10 V. The input signal of the frequency indicator is freely scalable, which increases its application possibilities.

  • IP65 protected at the front
  • 6 different standardised signal inputs available
  • configuration via software
  • 5-digit LED display

Details
Panel Indicator PCE-N25S
Panel Indicator PCE-N25S
US$ 125.00
ex. VAT, ex. delivery costs
The panel indicator is used for processing standardised signals. Depending on your specific needs, the panel indicator can be ordered with different inputs, such as 0…20 mA, 4…20 mA, 0…60 mV, 0…10 V, ±60 mV or ±10 V. The input signal of the panel indicator is freely scalable, which increases its application possibilities.

  • IP65 protected at the front
  • 6 different standardised signal inputs available
  • configuration via software
  • 5-digit LED display

Details
Pressure Indicator PCE-N25S
Pressure Indicator PCE-N25S
US$ 125.00
ex. VAT, ex. delivery costs
The pressure indicator is used for processing standardised signals. Depending on your specific needs, the pressure indicator can be ordered with different inputs, such as 0…20 mA, 4…20 mA, 0…60 mV, 0…10 V, ±60 mV or ±10 V. The input signal of the pressure indicator is freely scalable, which increases its application possibilities.

  • IP65 protected at the front
  • 6 different standardised signal inputs available
  • configuration via software
  • 5-digit LED display

Details
Voltage Indicator PCE-N25S
Voltage Indicator PCE-N25S
US$ 125.00
ex. VAT, ex. delivery costs
The voltage indicator is used for processing standardised signals. Depending on your specific needs, the voltage indicator can be ordered with different inputs, such as 0…20 mA, 4…20 mA, 0…60 mV, 0…10 V, ±60 mV or ±10 V. The input signal of the voltage indicator is freely scalable, which increases its application possibilities.

  • IP65 protected at the front
  • 6 different standardised signal inputs available
  • configuration via software
  • 5-digit LED display

Details
Panel Meter PCE-N25T
Panel Meter PCE-N25T
US$ 125.00
ex. VAT, ex. delivery costs

The digital panel meter is used for processing signals coming from temperature sensors. Depending on your specific needs, the panel meter can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the panel meter is freely scalable, which increases its application possibilities.


  • IP65 protected front
  • For thermocouples and resistance thermometers
  • Configuration via software
  • 5-digit LED display

Details
Temperature Indicator PCE-N25T
Temperature Indicator PCE-N25T
US$ 125.00
ex. VAT, ex. delivery costs

The digital temperature indicator is used for processing signals coming from temperature sensors. Depending on your specific needs, the temperature indicator can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the temperature indicator is freely scalable, which increases its application possibilities.


  • IP65 protected front
  • For thermocouples and resistance thermometers
  • Configuration via software
  • 5-digit LED display

Details
Water Analysis Meter PCE-0100 Salinity Refractometer
Water Analysis Meter PCE-0100 Salinity Refractometer
US$ 127.00
ex. VAT, ex. delivery costs
No-Shopping

PCE-0100 is a handheld refractometer used to determine the salt content or % salinity ppt and salinity SG (specific gravity) of salt water, sea water and other solutions containing a concentration of salt. This portable pocket salinity refractometer has a double scale to allow the user to view both measurement parameters at once.


  • Measurement range: 0 … 100% salinity ppt, 1.000 … 1.070 salinity SG
  • Resolution: 1 % or 0.001
  • Accuracy: ±0.1 %

Details
Geiger Counter PCE-RAM 5
Geiger Counter PCE-RAM 5
US$ 135.00
ex. VAT, ex. delivery costs
The geiger counter is a small, highly sensitive radiation warning device that is mainly used to monitor X, ß and y radiation.

  • X, ß and y radiation
  • Measuring range: 0.05 usv … 50 msv based on 137 Cs y
  • Accuracy: -17 % … + 25 %
  • Clip design
  • OLED display 
  • USB-C charging socket
Details
Radiation Meter PCE-RAM 5
Radiation Meter PCE-RAM 5
US$ 135.00
ex. VAT, ex. delivery costs
The radiation meter  is a small, highly sensitive radiation warning device that is mainly used to monitor X, ß and y radiation.

  • X, ß and y radiation
  • Measuring range: 0.05 usv … 50 msv based on 137 Cs y
  • Accuracy: -17 % … + 25 %
  • Clip design
  • OLED display 
  • USB-C charging socket
Details
Environmental Meter PCE-RAM 5
Environmental Meter PCE-RAM 5
US$ 135.00
ex. VAT, ex. delivery costs
The environmental meter is a small, highly sensitive radiation warning device that is mainly used to monitor X, ß and y radiation.

  • X, ß and y radiation
  • Measuring range: 0.05 usv … 50 msv based on 137 Cs y
  • Accuracy: -17 % … + 25 %
  • Clip design
  • OLED display 
  • USB-C charging socket
Details
Light Sensor PCE-FST-100-2003-LS
Light Sensor PCE-FST-100-2003-LS
US$ 148.00
ex. VAT, ex. delivery costs
The Light Sensor is ideal for monitoring light intensities in greenhouses, industrial facilities or smart farming systems, enabling precise control of lighting and energy use. The Light Sensor detects light intensities from 0 to 65,535 lx and delivers the measured values via a digital RS-485 Modbus RTU output.
- Power supply: 10 ... 30V DC

  • Illuminance: 0 ... 65535 lx
  • Resolution: 1 lx - Accuracy: ±7 % FS @25°C / 77°F
  • Protection class: IP65
  • Output: RS-485 Modbus RTU*
Details
Environmental Meter PCE-FST-100-2003-LS
Environmental Meter PCE-FST-100-2003-LS
US$ 148.00
ex. VAT, ex. delivery costs
The Environmental Meter is ideal for monitoring light intensities in greenhouses, industrial facilities or smart farming systems, enabling precise control of lighting and energy use. The Environmental Meter detects light intensities from 0 to 65,535 lx and delivers the measured values via a digital RS-485 Modbus RTU output.
- Power supply: 10 ... 30V DC

  • Illuminance: 0 ... 65535 lx
  • Resolution: 1 lx - Accuracy: ±7 % FS @25°C / 77°F
  • Protection class: IP65
  • Output: RS-485 Modbus RTU*
Details
Lux Meter PCE-FST-100-2003-LS
Lux Meter PCE-FST-100-2003-LS
US$ 148.00
ex. VAT, ex. delivery costs
The Lux Meter is ideal for monitoring light intensities in greenhouses, industrial facilities or smart farming systems, enabling precise control of lighting and energy use. The Lux Meter detects light intensities from 0 to 65,535 lx and delivers the measured values via a digital RS-485 Modbus RTU output.
- Power supply: 10 ... 30V DC

  • Illuminance: 0 ... 65535 lx
  • Resolution: 1 lx - Accuracy: ±7 % FS @25°C / 77°F
  • Protection class: IP65
  • Output: RS-485 Modbus RTU*
Details
Environmental Tester PCE-FST-100-2003-LS
Environmental Tester PCE-FST-100-2003-LS
US$ 148.00
ex. VAT, ex. delivery costs
The Environmental Tester is ideal for monitoring light intensities in greenhouses, industrial facilities or smart farming systems, enabling precise control of lighting and energy use. The Environmental Tester detects light intensities from 0 to 65,535 lx and delivers the measured values via a digital RS-485 Modbus RTU output.
- Power supply: 10 ... 30V DC

  • Illuminance: 0 ... 65535 lx
  • Resolution: 1 lx - Accuracy: ±7 % FS @25°C / 77°F
  • Protection class: IP65
  • Output: RS-485 Modbus RTU*
Details
Environmental Tester PCE-RAM 5
Environmental Tester PCE-RAM 5
US$ 135.00
ex. VAT, ex. delivery costs
The environmental tester is a small, highly sensitive radiation warning device that is mainly used to monitor X, ß and y radiation.

  • X, ß and y radiation
  • Measuring range: 0.05 usv … 50 msv based on 137 Cs y
  • Accuracy: -17 % … + 25 %
  • Clip design
  • OLED display 
  • USB-C charging socket
Details
Radiation Detector PCE-RAM 5
Radiation Detector PCE-RAM 5
US$ 135.00
ex. VAT, ex. delivery costs
The radiation detector and safety meter is a small, highly sensitive radiation warning device that is mainly used to monitor X, ß and y radiation.

  • X, ß and y radiation
  • Measuring range: 0.05 usv … 50 msv based on 137 Cs y
  • Accuracy: -17 % … + 25 %
  • Clip design
  • OLED display 
  • USB-C charging socket
Details
Radioactivity Meter PCE-RAM 5
Radioactivity Meter PCE-RAM 5
US$ 135.00
ex. VAT, ex. delivery costs
The radioactivity meter is a small, highly sensitive radiation warning device that is mainly used to monitor X, ß and y radiation.

  • X, ß and y radiation
  • Measuring range: 0.05 usv … 50 msv based on 137 Cs y
  • Accuracy: -17 % … + 25 %
  • Clip design
  • OLED display 
  • USB-C charging socket
Details