• 8 UVA high-performance LEDs
• light colour: 365 ... 370 nm
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• digital pulse width modulation
• phase shift - 360 ° ... + 360 °
• quick adjustment via x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• external trigger input and output
• route measurement
• slow motion mode
• incl. ISO-Calibration Certificate

• 8 UVA high-performance LEDs
• light colour: 365 ... 370 nm
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• digital pulse width modulation
• phase shift - 360 ° ... + 360 °
• quick adjustment via x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• external trigger input and output
• route measurement
• slow motion mode
• incl. ISO-Calibration Certificate

• Measuring range: 10 … 100 N/mm² / 1500 … 8500 PSI (lbs / in²)
• Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
• Digital display of results
• USB interface for connection to a PC
• Data storage
• Rechargeable battery
• incl. ISO-Calibration Certificate

• 8 UVA high-performance LEDs
• light colour: 365 ... 370 nm
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• digital pulse width modulation
• phase shift - 360 ° ... + 360 °
• quick adjustment via x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• external trigger input and output
• route measurement
• slow motion mode
• incl. ISO-Calibration Certificate

• Residual magnetic field measurement in 5 units
• OLED display
• Axial probe with ø 8mm
• Defined measuring distance of 2.0 mm
• Memory for 4000 measured values
• Wireless interface

• Residual magnetic field measurement in 5 units
• OLED display
• Axial probe with ø 8mm
• Defined measuring distance of 2.0 mm
• Memory for 4000 measured values
• Wireless interface

• Residual magnetic field measurement in 5 units
• OLED display
• Axial probe with ø 8mm
• Defined measuring distance of 2.0 mm
• Memory for 4000 measured values
• Wireless interface

• Residual magnetic field measurement in 5 units
• OLED display
• Axial probe with ø 8mm
• Defined measuring distance of 2.0 mm
• Memory for 4000 measured values
• Wireless interface

• Residual magnetic field measurement in 5 units
• OLED display
• Axial probe with ø 8mm
• Defined measuring distance of 2.0 mm
• Memory for 4000 measured values
• Wireless interface

• 8 UVA high-performance LEDs
• light colour: 365 ... 370 nm
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• digital pulse width modulation
• phase shift - 360 ° ... + 360 °
• quick adjustment via x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• external trigger input and output
• route measurement
• slow motion mode
• incl. ISO-Calibration Certificate

• Measuring range: 10 … 100 N/mm² / 1500 … 8500 PSI (lbs / in²)
• Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
• Digital Display of results
• USB interface for connection to a PC
• Data storage
• Rechargeable battery
• incl. ISO-Calibration Certificate

• Measuring range: 10 … 100 N/mm² / 1500 … 8500 PSI (lbs / in²)
• Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
• Digital Display of results
• USB interface for connection to a PC
• Data storage
• Rechargeable battery
• incl. ISO-Calibration Certificate

• Residual magnetic field measurement in 5 units
• OLED display
• Axial probe with ø 8mm
• Defined measuring distance of 2.0 mm
• Memory for 4000 measured values
• Wireless interface

• Measuring range: 10 … 100 N/mm² / 1500 … 8500 PSI (lbs / in²)
• Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
• Digital display of results
• USB interface for connection to a PC
• Data storage
• Rechargeable battery
• incl. ISO-Calibration Certificate

• Measuring range: 10 … 100 N/mm² / 1500 … 8500 PSI (lbs / in²)
• Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
• Digital display of results
• USB interface for connection to a PC
• Data storage
• Rechargeable battery
• incl. ISO-Calibration Certificate

• Residual magnetic field measurement in 5 units
• OLED display
• Axial probe with ø 8mm
• Defined measuring distance of 2.0 mm
• Memory for 4000 measured values
• Wireless interface

• Residual magnetic field measurement in 5 units
• OLED display
• Axial probe with ø 8mm
• Defined measuring distance of 2.0 mm
• Memory for 4000 measured values
• Wireless interface

• Measuring range: 10 … 100 N/mm² / 1500 … 8500 PSI (lbs / in²)
• Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
• Digital display of results
• USB interface for connection to a PC
• Data storage
• Rechargeable battery
• incl. ISO-Calibration Certificate

• 8 UVA high-performance LEDs
• light colour: 365 ... 370 nm
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• digital pulse width modulation
• phase shift - 360 ° ... + 360 °
• quick adjustment via x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• external trigger input and output
• route measurement
• slow motion mode
• incl. ISO-Calibration Certificate

• 8 UVA high-performance LEDs
• light colour: 365 ... 370 nm
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• digital pulse width modulation
• phase shift - 360 ° ... + 360 °
• quick adjustment via x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• external trigger input and output
• route measurement
• slow motion mode
• incl. ISO-Calibration Certificate

• Measuring range: 10 … 100 N/mm² / 1500 … 8500 PSI (lbs / in²)
• Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
• Digital Display of results
• USB interface for connection to a PC
• Data storage
• Rechargeable battery
• incl. ISO-Calibration Certificate

• 8 UVA high-performance LEDs
• light colour: 365 ... 370 nm
• flash frequency 60 ... 300000 FPM (flashes per minute)
• accuracy: 0.003 %
• digital pulse width modulation
• phase shift - 360 ° ... + 360 °
• quick adjustment via x2 and ÷2 key
• intuitive control keys and clear display
• pocket size
• external trigger input and output
• route measurement
• slow motion mode
• incl. ISO-Calibration Certificate

The 1-Phase-Power Meter PCE-GPA 62 (Graphic Power Quality Analyzer) with network analyzer / power and energy meter with data logger. The one-phase harmonic Analyzer (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics. This clamp meter is a perfect tool for all energetic measurements. It is delivered manufacturer calibrated and can be certified to ISO or standards.

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records

Three-Phase Clamp Meter with network analyzer / power and energy meter with data logger. The three-phase harmonic Analyzer (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics. This clamp meter is a perfect tool for all energetic measurements. It is delivered manufacturer calibrated and can be certified to ISO or standards.

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records

Clamp on Tester with network Analyzer / Clamp on Tester with data logger. The Clamp on Tester (Graphic Power Quality Analyzer) PCE-GPA 62 is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50? of the harmonic waveform. As all test instruments, the Clamp on Tester is delivered manufacturer calibrated (ISO certification is available optional).

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records

The Three-Phase Current Clamp (Graphic Power Quality Analyzer) PCE-GPA 62 is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics.

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records

HVAC Meter with network Analyzer / Clamp on Tester with data logger.

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records

Multimeter / TRMS Multimeter with network analyzer / power and energy meter with data logger.

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records

This Portable Power Analyzer is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50º of the harmonic waveform. The Portable Power Analyzer clamp is equipped with data logger. The test instrument is delivered manufacurer calibrated (ISO or certification as an option).

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records

This power analyzer is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50º of the harmonic waveform. The power analyzer clamp is equipped with data logger. The test instrument is delivered manufacurer calibrated (ISO or certification as an option).

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records

The power data logger (Graphic Power Quality Analyzer) PCE-GPA 62 is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics.

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records

The Power Meter PCE-GPA 62 (Graphic Power Quality Analyzer) with network analyzer / power and energy meter with data logger. The one-phase harmonic Analyzer (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics. This clamp meter is a perfect tool for all energetic measurements. It is delivered manufacturer calibrated and can be certified to ISO or standards.

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records

Three-Phase Digital Multimeter with network analyzer / power and energy meter with data logger. The three-phase harmonic Analyzer (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics. This clamp meter is a perfect tool for all energetic measurements. It is delivered manufacturer calibrated and can be certified to ISO or standards.

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records

Three-Phase Electrical Tester with network analyzer / power and energy meter with data logger.

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records

The 1-Phase-Power Meter PCE-GPA 62 (Graphic Power Quality Analyzer) with network analyzer / power and energy meter with data logger. The one-phase harmonic Analyzer (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics. This clamp meter is a perfect tool for all energetic measurements. It is delivered manufacturer calibrated and can be certified to ISO or standards.

• Real-time test, register and measurement of voltage and current (real and effective) 
• Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
• Max. conductor diameter: 55 mm / 2.2 in
• Records up to 50,000 records

PCE-VE 320HR is an automotive tester, borescope, inspection camera or endoscope for the non-destructive inspection (NDI) of engines, machines and more. This industrial borescope is an ideal tool for diagnosing issues in hard-to-reach places. The waterproof camera head features 6 LED lights (4 front, 2 side) for better illumination. In addition, digital image magnification or zoom of up to 2 times is available, plus boost function for improved image quality in the dark.

• Diameter camera head: Ø 5.5mm / 0.22"
• Cable length: 1 m / 3ft 3"
• With boost function: better images in dark surroundings
• 2 additional side LEDs for better lighting
• Image rotation possible
• Interface: Mini-USB 1.1 und AV out
• Memory: 8 GB SD memory card (incl.)