Query results | PCE Instruments

Automotive Tester PCE-LES 308UV-385-ICA incl. ISO-Calibration Certificate

US$ 1,368.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Automotive Tester. The Automotive Tester is equipped with 8 high-power UVA LEDs, which together generate a light intensity of 4617 μW/cm² at a distance of 30 cm. The stroboscope allows you to set the flash frequency in both FPM and Hz.

8 UVA high-performance LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment via x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode
incl. ISO-Calibration Certificate

Car Measuring Device PCE-LES 308UV-385-ICA incl. ISO-Calibration Certificate

US$ 1,368.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Car Measuring Device. The Car Measuring Device is equipped with 8 high-power UVA LEDs, which together generate a light intensity of 4617 μW/cm² at a distance of 30 cm. The stroboscope allows you to set the flash frequency in both FPM and Hz.

8 UVA high-performance LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment via x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode
incl. ISO-Calibration Certificate

Condition Monitoring Stroboscope PCE-LES 308UV-385-ICA incl. ISO-Calibration Certificate

US$ 1,368.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Condition Monitoring Stroboscope. The Condition Monitoring Stroboscope is equipped with 8 high-power UVA LEDs, which together generate a light intensity of 4617 μW/cm² at a distance of 30 cm. The Condition Monitoring Stroboscope allows you to set the flash frequency in both FPM and Hz.

8 UVA high-performance LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment via x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode
incl. ISO-Calibration Certificate

Handheld Tachometer PCE-LES 308UV-385-ICA incl. ISO-Calibration Certificate

US$ 1,368.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Handheld Tachometer. The Handheld Tachometer is equipped with 8 high-power UVA LEDs, which together generate a light intensity of 4617 μW/cm² at a distance of 30 cm.

8 UVA high-performance LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment via x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode
incl. ISO-Calibration Certificate

Rotation Meter PCE-LES 308UV-385-ICA incl. ISO-Calibration Certificate

US$ 1,368.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Rotation Meter. The Rotation Meter is equipped with 8 high-power UVA LEDs, which together generate a light intensity of 4617 μW/cm² at a distance of 30 cm. The stroboscope allows you to set the flash frequency in both FPM and Hz.

8 UVA high-performance LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment via x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode
incl. ISO-Calibration Certificate

Stroboscope / Stroboscope Light PCE-LES 308UV-385-ICA incl. ISO-Calibration Certificate

US$ 1,368.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Stroboscope / Stroboscope Light. The Stroboscope / Stroboscope Light is equipped with 8 high-power UVA LEDs, which together generate a light intensity of 4617 μW/cm² at a distance of 30 cm. The stroboscope allows you to set the flash frequency in both FPM and Hz.

8 UVA high-performance LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment via x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode
incl. ISO-Calibration Certificate

Tachometer PCE-LES 308UV-385-ICA incl. ISO-Calibration Certificate

US$ 1,368.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Tachometer. The Tachometer is equipped with 8 high-power UVA LEDs, which together generate a light intensity of 4617 μW/cm² at a distance of 30 cm. The stroboscope allows you to set the flash frequency in both FPM and Hz.

8 UVA high-performance LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment via x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode
incl. ISO-Calibration Certificate

Force Gage PCE-DFG 10 X-ICA incl. ISO-Calibration Certificate

US$ 1,365.00

ex. VAT, ex. delivery costs

The Force Gage records both tensile and compressive forces with extremely high accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, the tear-off force or the force required to actuate buttons or switches. The Force Gage is supplied with an internal measuring cell and can measure forces up to 10 N.

measurement range: 0 ... 10 N / 0 ... 2.25 lbf
resolution: 0.005 N / 0.0011 lbf
accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
graphic display
measuring rate: 1 ... 7,200 Hz
incl. ISO calibration certificate

Force Gauge / Digital Force Gauge PCE-DFG 10 X-ICA incl. ISO-Calibration Certificate

US$ 1,365.00

ex. VAT, ex. delivery costs

The Force Gauge / Digital Force Gauge / Digital Force Gauge / Digital Force Gauge records both tensile and compressive forces with extremely high accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, the tear-off force or the force required to actuate buttons or switches. The Force Gauge / Digital Force Gauge / Digital Force Gauge / Digital Force Gauge is supplied with an internal measuring cell and can measure forces up to 10 N.

measurement range: 0 ... 10 N / 0 ... 2.25 lbf
resolution: 0.005 N / 0.0011 lbf
accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
graphic display
measuring rate: 1 ... 7,200 Hz
incl. ISO calibration certificate

Tensile Tester PCE-DFG 10 X-ICA incl. ISO-Calibration Certificate

US$ 1,365.00

ex. VAT, ex. delivery costs

The Tensile Tester records both tensile and compressive forces with extremely high accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, the tear-off force or the force required to actuate buttons or switches. The Tensile Tester is supplied with an internal measuring cell and can measure forces up to 10 N.

measurement range: 0 ... 10 N / 0 ... 2.25 lbf
resolution: 0.005 N / 0.0011 lbf
accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
graphic display
measuring rate: 1 ... 7,200 Hz
incl. ISO calibration certificate

Tension Dynamometer / Tension Load Cell PCE-DFG 10 X-ICA incl. ISO-Calibration Certificate

US$ 1,365.00

ex. VAT, ex. delivery costs

The Tension Dynamometer / Tension Load Cell records both tensile and compressive forces with extremely high accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, the tear-off force or the force required to actuate buttons or switches. The Tension Dynamometer / Tension Load Cell is supplied with an internal measuring cell and can measure forces up to 10 N.

measurement range: 0 ... 10 N / 0 ... 2.25 lbf
resolution: 0.005 N / 0.0011 lbf
accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
graphic display
measuring rate: 1 ... 7,200 Hz
incl. ISO calibration certificate

Force Gage PCE-DFG 20 X-ICA incl. ISO-Calibration Certificate

US$ 1,364.00

ex. VAT, ex. delivery costs

The Force Gage records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The Force Gage is supplied with an external measuring cell and can measure forces up to 20 N.

Measuring range: 0 ... 20 N
Resolution: 0.01 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 ... 7200 Hz
incl. ISO-Calibration Certificate

Force Gage PCE-DFG 200 X-ICA incl. ISO-Calibration Certificate

US$ 1,364.00

ex. VAT, ex. delivery costs

Measuring range: 0 ... 200 N
Resolution: 0.1 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 ... 7200 Hz
incl. ISO-Calibration Certificate

Force Gauge / Digital Force Gauge PCE-DFG 20 X-ICA incl. ISO-Calibration Certificate

US$ 1,364.00

ex. VAT, ex. delivery costs

The Force Gauge / Digital Force Gauge records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The Force Gauge / Digital Force Gauge is supplied with an external measuring cell and can measure forces up to 20 N.

Measuring range: 0 ... 20 N
Resolution: 0.01 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 ... 7200 Hz
incl. ISO-Calibration Certificate

Force Gauge / Digital Force Gauge PCE-DFG 200 X-ICA incl. ISO-Calibration Certificate

US$ 1,364.00

ex. VAT, ex. delivery costs

Measuring range: 0 ... 200 N
Resolution: 0.1 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 ... 7200 Hz
incl. ISO-Calibration Certificate

Tensile Tester PCE-DFG 20 X-ICA incl. ISO-Calibration Certificate

US$ 1,364.00

ex. VAT, ex. delivery costs

The Tensile Tester records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The Tensile Tester is supplied with an external measuring cell and can measure forces up to 20 N.

Measuring range: 0 ... 20 N
Resolution: 0.01 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 ... 7200 Hz
incl. ISO-Calibration Certificate

Tensile Tester PCE-DFG 200 X-ICA incl. ISO-Calibration Certificate

US$ 1,364.00

ex. VAT, ex. delivery costs

Measuring range: 0 ... 200 N
Resolution: 0.1 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 ... 7200 Hz
incl. ISO-Calibration Certificate

Tension Dynamometer / Tension Load Cell PCE-DFG 20 X-ICA incl. ISO-Calibration Certificate

US$ 1,364.00

ex. VAT, ex. delivery costs

The Tension Tension Dynamometer / Tension Load Cell / Tension Load Cell records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The Tension Tension Dynamometer / Tension Load Cell / Tension Load Cell is supplied with an external measuring cell and can measure forces up to 20 N.

Measuring range: 0 ... 20 N
Resolution: 0.01 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 ... 7200 Hz
incl. ISO-Calibration Certificate

Tension Dynamometer / Tension Load Cell PCE-DFG 200 X-ICA incl. ISO-Calibration Certificate

US$ 1,364.00

ex. VAT, ex. delivery costs

Measuring range: 0 ... 200 N
Resolution: 0.1 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 ... 7200 Hz
incl. ISO-Calibration Certificate

Automotive Tester PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate

US$ 1,363.00

ex. VAT, ex. delivery costs

The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"- incl. ISO-Calibration Certificate

Car Measuring Device PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate

US$ 1,363.00

ex. VAT, ex. delivery costs

The car measuring device is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the car measuring device, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Coating Thickness Gauge PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate

US$ 1,363.00

ex. VAT, ex. delivery costs

The coating thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the coating thickness gauge, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Material Tester PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate

US$ 1,363.00

ex. VAT, ex. delivery costs

The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Material Thickness Meter PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate

US$ 1,363.00

ex. VAT, ex. delivery costs

The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Paint Gauge PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate

US$ 1,363.00

ex. VAT, ex. delivery costs

The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Paint Thickness Tester PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate

US$ 1,363.00

ex. VAT, ex. delivery costs

The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Surface Tester PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate

US$ 1,363.00

ex. VAT, ex. delivery costs

The surface tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the surface tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Thickness Gauge PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate

US$ 1,363.00

ex. VAT, ex. delivery costs

The thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness gauge, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Thickness Meter PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate

US$ 1,363.00

ex. VAT, ex. delivery costs

The thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness meter, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO-Calibration Certificate

Automotive Tester PCE-LES 308-ICA incl. ISO-Calibration Certificate

US$ 1,360.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Automotive Tester. The Automotive Tester is equipped with 8 high-power LEDs, which together generate a light intensity of 17670 lux at 20 cm / 1000 Hz.

bright 8 high power LEDs
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
9150 lux at 30 cm / 1000 Hz
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment using x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode
incl. ISO-Calibration Certificate

Car Measuring Device PCE-LES 308-ICA incl. ISO-Calibration Certificate

US$ 1,360.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Car Measuring Device. The Car Measuring Device is equipped with 8 high-power LEDs, which together generate a light intensity of 17670 lux at 20 cm / 1000 Hz.

bright 8 high power LEDs
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
9150 lux at 30 cm / 1000 Hz
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment using x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode
incl. ISO-Calibration Certificate

Condition Monitoring Stroboscope PCE-LES 308-ICA incl. ISO-Calibration Certificate

US$ 1,360.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Condition Monitoring Stroboscope. The Condition Monitoring Stroboscope is equipped with 8 high-power LEDs, which together generate a light intensity of 17670 lux at 20 cm / 1000 Hz.

bright 8 high power LEDs
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
9150 lux at 30 cm / 1000 Hz
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment using x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode
incl. ISO-Calibration Certificate

Handheld Tachometer PCE-LES 308-ICA incl. ISO-Calibration Certificate

US$ 1,360.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Handheld Tachometer. The Handheld Tachometer is equipped with 8 high-power LEDs, which together generate a light intensity of 17670 lux at 20 cm / 1000 Hz.

bright 8 high power LEDs
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
9150 lux at 30 cm / 1000 Hz
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment using x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode
incl. ISO-Calibration Certificate

Rotation Meter PCE-LES 308-ICA incl. ISO-Calibration Certificate

US$ 1,360.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Rotation Meter. The Rotation Meter is equipped with 8 high-power LEDs, which together generate a light intensity of 17670 lux at 20 cm / 1000 Hz.

bright 8 high power LEDs
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
9150 lux at 30 cm / 1000 Hz
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment using x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode
incl. ISO-Calibration Certificate

Stroboscope / Stroboscope Light PCE-LES 308-ICA incl. ISO-Calibration Certificate

US$ 1,360.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Stroboscope / Stroboscope Light. The Stroboscope / Stroboscope Light is equipped with 8 high-power LEDs, which together generate a light intensity of 17670 lux at 20 cm / 1000 Hz.

bright 8 high power LEDs
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
9150 lux at 30 cm / 1000 Hz
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment using x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode
incl. ISO-Calibration Certificate

Tachometer PCE-LES 308-ICA incl. ISO-Calibration Certificate

US$ 1,360.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Tachometer. The Tachometer is equipped with 8 high-power LEDs, which together generate a light intensity of 17670 lux at 20 cm / 1000 Hz.

bright 8 high power LEDs
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
9150 lux at 30 cm / 1000 Hz
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment using x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode
incl. ISO-Calibration Certificate