The Absolute Moisture Meter is designed for professional use in the control output of sawmills in the input or control of pellet mills, manufacturers of heating briquettes and other branches of production. The Absolute Moisture Meter determines the absolute humidity of sawdust and other types of biomass, such as Wood shavings, hay, straw.

• Fast moisture control
• Electrical resistance methods
• For biomasses such as straw, hay, sawdust, etc.
• Sample size up to approx. 120 cm³

The Moisture Tester for wood is designed for professional use in the control output of sawmills in the input or control of pellet mills, manufacturers of heating briquettes and other branches of production. The Moisture Tester for wood determines the absolute moisture of sawdust and other types of biomass, such as Wood shavings, hay, straw.

• Fast moisture control
• Electrical resistance method
• For biomasses such as straw, hay, sawdust, etc.
• Sample size up to approx. 120 cm³

The pellets moisture meter PCE-PEL 20 was designed in collaboration with biomass power plant operators. Since the heating value of pellets depends strongly on its moisture the pellets moisture meter ensures high efficiency. The pellets moisture Analyzer performs a resistance moisture detection.

• Measuring range from 10 to 20 %
• Resolution 0.1 %
• 1000 mm measuring sensor

• Measuring range: 4 ... 200 cN
• Resolution: 1 cN
• Accuracy: ±2.5% FS
• Units: cN, oz, kgf, N, lb
• Memory: 41 data sets
• Measurement modes: Peak, Real-Time, Hold
• Sensor head width: 65 mm
• PC software
• Measurement on wires, fibers, or textiles

The absolute moisture meter is designed for professional use in the control output of sawmills in the input or control of pellet mills, manufacturers of heating briquettes and other branches of production. The absolute moisture meter determines the absolute humidity of sawdust and other types of biomass, such as Wood shavings, hay, straw. 

• Fast moisture control
• Electrical resistance method
• For biomasses such as straw, hay, sawdust, etc.
• Sample size up to approx. 120 cm³

The Wood Moisture Meter is designed for professional use in the control output of sawmills in the input or control of pellet mills, manufacturers of heating briquettes and other branches of production. The Wood Moisture Meter determines the absolute humidity of sawdust and other types of biomass, such as Wood shavings, hay, straw.

• Fast moisture control
• Electrical resistance method
• For biomasses:
  such as straw, hay, sawdust, etc.
• Sample size up to approx. 120 cm³

• measurement range: 0 ... 160 km/h
• accuracy: ±0.5 km/h (0 ... 15 km/h); 3% (15 ... 120 km/h)
• 5 m cable with 4-pin M12 connection
• RS485 Modbus RTU communication
• measurement of wind speed and direction
• protection class IP65 for outdoor areas

The moisture meter PCE-MA 200 is used to weigh a range of substances up to 200g / 7.05oz and measure their moisture content. A halogen lamp heats up the chamber to 199 °C / 390 °F. The moisture meter dries the substance to be weighed within the heating chamber and determines the moisture content from the difference in weight.

• Testing or weighing capacity: 200 g / 7.05 oz
• Readability: 1 mg / 0.001 g 
• Adjustable drying temperature and time
• Accuracy to 0.01 %

PCE-PEL 20 is a portable handheld digital moisture analyzer used to measure the moisture or water content of pellets and biomass such as sawdust, wood chips, straw, hay, sunflower shells, buckwheat, corn and soy. Designed in collaboration with biomass power plant operators, this pellet moisture analyzer features automatic temperature compensation.

• 1000 mm / 39.37" long acid-proof steel measuring probe
• Moisture content measuring range: 10 … 20 %
• Temperature compensation range: 0 … +50 °C (32 … 122 °F)
• Resolution: 0.1 % moisture content
• Response time: Approx. 3 seconds

The wood moisture meter was designed in collaboration with biomass power plant operators. Since the heating value of pellets depends strongly on its moisture the wood moisture meter ensures high efficiency. The pellets moisture analyzer performs a resistance moisture detection.

• Measuring range: 10 % to 20 %
• Resolution: 0.1 %
• 1000 mm measuring sensor

The moisture meter has a moisture measuring range of 0 … 100%. The moisture meter is operated via the 5" touchscreen. To determine the moisture content with the moisture meter, a sample is evenly distributed on the sample pan.

• Measuring range: 0 … 110 g / 0 … 3.88 oz
• Resolution: 0.001 g
• Memory for 32 drying parameters
• 5" touch screen for easy operation
• RS-232 interface for connection to a PC

The absolute moisture meter has a moisture measuring range of 0 … 100%. The absolute moisture meter is operated via the 5" touchscreen. To determine the moisture content with the absolute moisture meter, a sample is evenly distributed on the sample pan.

• Measuring range: 0 … 110 g / 0 … 3.88 oz
• Resolution: 0.001 g
• Memory for 32 drying parameters
• 5" touch screen for easy operation
• RS-232 interface for connection to a PC

The moisture analyzer has a moisture measuring range of 0 … 100%. The moisture analyzer is operated via the 5" touchscreen. To determine the moisture content with the moisture analyzer, a sample is evenly distributed on the sample pan.

• Weighing range:0 … 110 g / 0 … 3.88 oz
• Resolution: 0.001 g
• Memory for 32 drying parameters
• 5" touch screen for easy operation
• RS-232 interface for connection to a PC

The absolute moisture meter PCE-MA 200 is used to weigh a range of substances up to 200g / 7.05oz and measure their moisture content. A halogen lamp heats up the chamber to 199 °C / 390 °F. The absolute moisture meter dries the substance to be weighed within the heating chamber and determines the moisture content from the difference in weight.

• Testing or weighing capacity: 200 g / 7.05 oz
• Readability: 1 mg / 0.001 g / 0.01 %
• Adjustable drying temperature and time
• Accuracy to 0.01 %

• Measuring range: 0 ... 9999 RLU
• Resolution: 1 RLU
• Accuracy: ±2% or ±2 RLU
• Measuring time: 15 s
• Automatic calibration
• Memory for 3000 measurements
• Adjustable limit values

PCE-MA 200 is an oven-drying moisture analyzer for weighing and heating material samples to determine moisture content. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the moisture analyzer or moisture balance dries the sample to be weighed, and then calculates the moisture content from the weight difference.

• Testing or weighing sample capacity: 200 g / 7.05 oz
• Moisture content measurement range: 0 … 100 %
• Readout, readability or resolution: 1 mg / 0.001 g 
• Adjustable drying temperature and time
• Accuracy to 0.01 %

The Multifunction Moisture Analyzer PCE-MA 200 is used to weigh a range of substances up to 200g / 7.05oz and measure their moisture content. A halogen lamp heats up the chamber to 199 °C / 390 °F. The multifunction moisture analyzer dries the substance to be weighed within the heating chamber and determines the moisture content from the difference in weight.

• Weighing range: 200 g / 7.05 oz
• Resolution: 1 mg / 0.001 g / 0.01 %
• Adjustable drying temperature and time
• Accuracy to 0.01 %

The moisture balance has a moisture measuring range of 0 … 100%. The moisture balance is operated via the 5" touchscreen. To determine the moisture content with the moisture balance, a sample is evenly distributed on the sample pan.

• Measuring range: 0 … 110 g / 0 … 3.88 oz
• Resolution: 0.001 g
• Memory for 32 drying parameters
• 5" touch screen for easy operation
• RS-232 interface for connection to a PC

The Moisture Meter PCE-MA 200 is used to weigh a range of substances up to 200g / 7.05oz and measure their moisture content. A halogen lamp heats up the chamber to 199 °C / 390 °F. The Moisture Meter dries the substance to be weighed within the heating chamber and determines the moisture content from the difference in weight.

• Testing or weighing capacity: 200 g / 7.05 oz
• Readability: 1 mg / 0.001 g / 0.01 %
• Adjustable drying temperature and time
• Accuracy to 0.01 %
• incl. ISO Calibration Certificate

The moisture meter PCE-MA 100-ICA allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the moisture meter dries the material to be weighed, and then calculates the moisture content from the weight difference.

• Testing or weighing capacity: 110 g / 3.88 oz
• Readability: 1 mg / 0.001 g / 0.01 %
• Adjustable drying temperature and time
• incl. ISO Calibration Certificate

The PCE-MA 202-ICA is an oven-drying moisture meter for weighing and heating material samples to determine moisture content. The heating chamber warms up to 199 °C / 390 °F with the use of halogen lamps. Drying of the sample to be weighed takes place within the chamber of the moisture meter and the moisture content is subsequently calculated from the difference between the initial and final weight.

• Testing or weighing capacity: 200 g / 7.05 oz
• Readability: 10 mg / 0.01 g / 0.1%
• Adjustable drying temperature and time
• incl. ISO Calibration Certificate

• Measuring range: 30…130 dB(A)
• Resolution: 0.1 dB
• Accuracy: ±1.5 dB
• Alarm relay: 5A/up to 240VAC
• Input.: 110V or 220V/50Hz or 60Hz
• Including class II sound calibrator
• incl. ISO calibration certificate

The Absolute Moisture Meter PCE-MA 200 is used to weigh a range of substances up to 200g / 7.05oz and measure their moisture content. A halogen lamp heats up the chamber to 199 °C / 390 °F. The Absolute Moisture Meter dries the substance to be weighed within the heating chamber and determines the moisture content from the difference in weight.

• Testing or weighing capacity: 200 g / 7.05 oz
• Readability: 1 mg / 0.001 g / 0.01 %
• Adjustable drying temperature and time
• Accuracy to 0.01 %
• incl. ISO Calibration Certificate

The absolute moisture meter PCE-MA 100-ICA allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the absolute moisture meter dries the material to be weighed, and then calculates the moisture content from the weight difference.

• Testing or weighing capacity: 110 g / 3.88 oz
• Readability: 1 mg / 0.001 g / 0.01 %
• Adjustable drying temperature and time
• incl. ISO Calibration Certificate

The Multifunction Moisture Analyzer PCE-MA 200 is used to weigh a range of substances up to 200g / 7.05oz and measure their moisture content. A halogen lamp heats up the chamber to 199 °C / 390 °F. The Multifunction Moisture Analyzer dries the substance to be weighed within the heating chamber and determines the moisture content from the difference in weight.

• Weighing range: 200 g / 7.05 oz
• Resolution: 1 mg / 0.001 g / 0.01 %
• Adjustable drying temperature and time
• Accuracy to 0.01 %
• incl. ISO Calibration Certificate

The Multifunction Moisture Analyzer PCE-MA 100-ICA allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the Multifunction Moisture Analyzer dries the material to be weighed, and then calculates the moisture content from the weight difference.

• Weighing range: 0.1 g … 110 g / 0.0035 … 3.88 oz
• Resolution: 0.01 g / 10 mg
• Moisture content measuring range: 0 … 100%
• Moisture content resolution or readability: 0.1%
• Adjustable drying time and temperature
• Memory stores up to 16 drying profiles
• incl. ISO Calibration Certificate

The PCE-MA 202-ICA is an oven-drying absolute moisture meter for weighing and heating material samples to determine moisture content. The heating chamber warms up to 199 °C / 390 °F with the use of halogen lamps. Drying of the sample to be weighed takes place within the chamber of the absolute moisture meter and the moisture content is subsequently calculated from the difference between the initial and final weight.

• Testing or weighing capacity: 200 g / 7.05 oz
• Readability: 10 mg / 0.01 g / 0.1%
• Adjustable drying temperature and time
• incl. ISO Calibration Certificate