Query results | PCE Instruments

Condition Monitoring Data Logging Device PCE-NDL 10-ICA incl. ISO Cal. Cert.

US$ 1,344.00

ex. VAT, ex. delivery costs

The condition monitoring data logging device is used to determine volume. The condition monitoring data logging device is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the condition monitoring data logging device. In addition, the condition monitoring data logging device has an SD card slot that enables the use of an SD card as an additional storage medium.

Measuring range: SPL: Auto 30 … 130 dB
Resolution: 0.1 dB
Low sampling rate
Automatic or manual storage
Selectable storage interval
Backlit LC display
Dose measurement or SPL measurement

Data-Logging Decibel Meter PCE-NDL 10-ICA incl. ISO Calibration Certificate

US$ 1,344.00

ex. VAT, ex. delivery costs

The data-logging decibel meter is used to determine volume. The PCE-NDL 10 data-logging decibel meter is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the data-logging decibel meter has an SD card slot that enables the use of an SD card as an additional storage medium.

Measuring range: SPL: Auto 30 … 130 dB
Resolution: 0.1 dB
Low sampling rate
Automatic or manual storage
Selectable storage interval
Backlit LC display
Dose measurement or SPL measurement

Data-Logging Noise Meter / Sound Meter PCE-NDL 10-ICA incl ISO Calibration Cert.

US$ 1,344.00

ex. VAT, ex. delivery costs

The data-logging noise meter / sound meter is used to determine volume. The PCE-NDL 10 data-logging noise meter / sound meter is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the data-logging noise meter / sound meter has an SD card slot that enables the use of an SD card as an additional storage medium.

Measuring range: SPL: Auto 30 … 130 dB
Resolution: 0.1 dB
Low sampling rate
Automatic or manual storage
Selectable storage interval
Backlit LC display
Dose measurement or SPL measurement

Data-Logging Sound Level Meter PCE-NDL 10-ICA incl. ISO Calibration Certificate

US$ 1,344.00

ex. VAT, ex. delivery costs

The data-logging sound level meter is used to determine volume. The PCE-NDL 10 data-logging sound level meter is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the data-logging sound level meter has an SD card slot that enables the use of an SD card as an additional storage medium.

Measuring range: SPL: Auto 30 … 130 dB
Resolution: 0.1 dB
Low sampling rate
Automatic or manual storage
Selectable storage interval
Backlit LC display
Dose measurement or SPL measurement

dB Data Logger PCE-NDL 10-ICA incl. ISO Calibration Certificate

US$ 1,344.00

ex. VAT, ex. delivery costs

The dB data logger is used to determine volume. The PCE-NDL 10 dB data logger is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the dB data logger has an SD card slot that enables the use of an SD card as an additional storage medium.

Measuring range: SPL: Auto 30 … 130 dB
Resolution: 0.1 dB
Low sampling rate
Automatic or manual storage
Selectable storage interval
Backlit LC display
Dose measurement or SPL measurement

Electrical Tester PCE-MO 2006-ICA incl. ISO calibration certificate

US$ 1,344.00

ex. VAT, ex. delivery costs

The electrical tester is a compact and precise measuring device with 5 selectable scale ranges for measuring resistances. By using the 4-wire measuring method for mΩ measurements, the electrical tester guarantees accurate and reliable results, even with the smallest resistances.

Measuring range: 0 mΩ … 2,000 Ω
Accuracy: ± 0.8 % of Mw.
Resolution: 0.1 mΩ
5 selectable measuring ranges
Test current: 1 mA, 10 mA, 100 mA

Internal memory
incl. ISO calibration certificate

Milliohmmeter PCE-MO 2006-ICA incl. ISO calibration certificate

US$ 1,344.00

ex. VAT, ex. delivery costs

The milliohmmeter is a compact and precise measuring device with 5 selectable scale ranges for measuring resistances. By using the 4-wire measuring method for mΩ measurements, the milliohmmeter guarantees accurate and reliable results, even with the smallest resistances.

Measuring range: 0 mΩ … 2,000 Ω
Accuracy: ± 0.8 % of Mw.
Resolution: 0.1 mΩ
5 selectable measuring ranges
Test current: 1 mA, 10 mA, 100 mA
Internal memory
incl. ISO calibration certificate

Milliohmmeter PCE-MO 2006-ICA incl. ISO calibration certificate

US$ 1,344.00

ex. VAT, ex. delivery costs

Measuring range: 0 mΩ … 2,000 Ω
Accuracy: ± 0.8 % of Mw.
Resolution: 0.1 mΩ
5 selectable measuring ranges
Test current: 1 mA, 10 mA, 100 mA

Internal memory
incl. ISO calibration certificate

Sound Dose Meter PCE-NDL 10-ICA incl. ISO Calibration Certificate

US$ 1,344.00

ex. VAT, ex. delivery costs

The data-logging Sound Dose Meter is used to determine volume. The PCE-NDL 10 data-logging Sound Dose Meter is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the data-logging Sound Dose Meter has an SD card slot that enables the use of an SD card as an additional storage medium.

Measuring range: SPL: Auto 30 … 130 dB
Resolution: 0.1 dB
Low sampling rate
Automatic or manual storage
Selectable storage interval
Backlit LC display
Dose measurement or SPL measurement

Ash Content Analyzer / Incinerator PCE-UX 052

US$ 1,343.00

ex. VAT, ex. delivery costs

The Ash Content Analyzer / Incinerator is a cost-effective and powerful alternative to conventional high-temperature furnaces. Developed for the incineration of individual samples up to a maximum temperature of 610 °C, this device is ideal for determining the ash content, the incineration residue and for treating all organic and inorganic materials.

radiator power: 375 W
temperature range up to approx. 610 °C
sample volume: max. 130 cm³
max. pan size: ⌀75 mm x 30 mm height
operating voltage: 230 V

Fast incinerator / Rapid incinerator PCE-UX 052

US$ 1,343.00

ex. VAT, ex. delivery costs

The Fast incinerator / Rapid incinerator is a cost-effective and powerful alternative to conventional high-temperature furnaces. Developed for the incineration of individual samples up to a maximum temperature of 610 °C, this device is ideal for determining the ash content, the incineration residue and for treating all organic and inorganic materials.

radiator power: 375 W
temperature range up to approx. 610 °C
sample volume: max. 130 cm³
max. pan size: ⌀75 mm x 30 mm height
operating voltage: 230 V

Heating Mantle PCE-UX 052

US$ 1,343.00

ex. VAT, ex. delivery costs

The Heating Mantle is a cost-effective and powerful alternative to conventional high-temperature furnaces. Developed for the incineration of individual samples up to a maximum temperature of 610 °C, this device is ideal for determining the ash content, the incineration residue and for treating all organic and inorganic materials. This infrared Heating Mantle is used in conjunction with moisture analysers, for example, to determine the incineration residue or ash content by annealing or incinerating the dry substance after the determination of dry matter, e.g. in sewage treatment plants, in the chemical or paper industry and many other areas.

radiator power: 375 W
temperature range up to approx. 610 °C
sample volume: max. 130 cm³
max. pan size: ⌀75 mm x 30 mm height
operating voltage: 230 V

Analytical Balance PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,342.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this analytical balance is ideally suited for checking small samples for their weight. For example, powder can be weighed with the analytical balance. Typical areas of application for the analytical balance are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Benchtop Scale PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,342.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this benchtop scale is ideally suited for checking small samples for their weight. For example, powder can be weighed with the benchtop scale. Typical areas of application for the benchtop scale are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Checkweighing Scale PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,342.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this checkweighing scale is ideally suited for checking small samples for their weight. For example, powder can be weighed with the checkweighing scale. Typical areas of application for the checkweighing scale are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Counting Scales PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,342.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, these counting scales are ideally suited for checking small samples for their weight. For example, powder can be weighed with these counting scales. Typical areas of application for the counting scales are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Industrial Scale PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,342.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this industrial scale is ideally suited for checking small samples for their weight. For example, powder can be weighed with the industrial scale. Typical areas of application for the industrial scale are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Inventory Scale PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,342.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this inventory scale is ideally suited for checking small samples for their weight. For example, powder can be weighed with the inventory scale. Typical areas of application for the inventory scale are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

LAB Scale PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,342.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this LAB scale is ideally suited for checking small samples for their weight. For example, powder can be weighed with the LAB scale. Typical areas of application for the laboratory scale are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Laboratory Balance PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,342.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this laboratory balance is ideally suited for checking small samples for their weight. For example, powder can be weighed with the laboratory balance. Typical areas of application for the laboratory balance are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Precision Balance PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,342.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this precision balance is ideally suited for checking small samples for their weight. For example, powder can be weighed with the precision balance. Typical areas of application for the precision balance are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Tabletop Scale PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,342.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this tabletop scale is ideally suited for checking small samples for their weight. For example, powder can be weighed with the tabletop scale. Typical areas of application for the tabletop scale are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Automotive Tester LM-TC-DUAL

US$ 1,335.00

ex. VAT, ex. delivery costs

The Automotive Tester has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Automotive Tester with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

Measuring range: 2 ... 5000 µm
Accuracy: 1 µm
FE / nFE metals
Wireless interface for Windows, iOS and Android
OLED display
Swiveling probe
IP54 housing

Car Measuring Device LM-TC-DUAL

US$ 1,335.00

ex. VAT, ex. delivery costs

The Car Measuring Device has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Car Measuring Device with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

Measuring range: 2 ... 5000 µm
Accuracy: 1 µm
FE / nFE metals
Wireless interface for Windows, iOS and Android
OLED display
Swiveling probe
IP54 housing

Coating Thickness Gauge LM-TC-DUAL

US$ 1,335.00

ex. VAT, ex. delivery costs

The Coating Thickness Gauge has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Coating Thickness Gauge with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

Measuring range: 2 ... 5000 µm
Accuracy: 1 µm
FE / nFE metals
Wireless interface for Windows, iOS and Android
OLED display
Swiveling probe
IP54 housing

Material Tester LM-TC-DUAL

US$ 1,335.00

ex. VAT, ex. delivery costs

The Material Tester has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Material Tester with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

Measuring range: 2 ... 5000 µm
Accuracy: 1 µm
FE / nFE metals
Wireless interface for Windows, iOS and Android
OLED display
Swiveling probe
IP54 housing

Material Thickness Meter LM-TC-DUAL

US$ 1,335.00

ex. VAT, ex. delivery costs

The Material Thickness Meter has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Material Thickness Meter with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

Measuring range: 2 ... 5000 µm
Accuracy: 1 µm
FE / nFE metals
Wireless interface for Windows, iOS and Android
OLED display
Swiveling probe
IP54 housing

Paint Gauge / Paint Tester LM-TC-DUAL

US$ 1,335.00

ex. VAT, ex. delivery costs

The Paint Gauge / Paint Tester has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Paint Gauge / Paint Tester with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

Measuring range: 2 ... 5000 µm
Accuracy: 1 µm
FE / nFE metals
Wireless interface for Windows, iOS and Android
OLED display
Swiveling probe
IP54 housing

Paint Test Equipment / Paint Testing Equipment LM-TC-DUAL

US$ 1,335.00

ex. VAT, ex. delivery costs

The Paint Test Equipment / Paint Testing Equipment has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Paint Test Equipment / Paint Testing Equipment with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

Measuring range: 2 ... 5000 µm
Accuracy: 1 µm
FE / nFE metals
Wireless interface for Windows, iOS and Android
OLED display
Swiveling probe
IP54 housing

Surface Testing LM-TC-DUAL

US$ 1,335.00

ex. VAT, ex. delivery costs

The Surface Testing has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Surface Testing with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

Measuring range: 2 ... 5000 µm
Accuracy: 1 µm
FE / nFE metals
Wireless interface for Windows, iOS and Android
OLED display
Swiveling probe
IP54 housing

Thickness Gauge LM-TC-DUAL

US$ 1,335.00

ex. VAT, ex. delivery costs

The Thickness Gauge has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Thickness Gauge with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

Measuring range: 2 ... 5000 µm
Accuracy: 1 µm
FE / nFE metals
Wireless interface for Windows, iOS and Android
OLED display
Swiveling probe
IP54 housing

Thickness Meter LM-TC-DUAL

US$ 1,335.00

ex. VAT, ex. delivery costs

The Thickness Meter has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Thickness Meter with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

Measuring range: 2 ... 5000 µm
Accuracy: 1 µm
FE / nFE metals
Wireless interface for Windows, iOS and Android
OLED display
Swiveling probe
IP54 housing

Automotive Tester PCE-CT 80-FN3

US$ 1,332.00

ex. VAT, ex. delivery costs

The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Car Measuring Device PCE-CT 80-FN3

US$ 1,332.00

ex. VAT, ex. delivery costs

The car measuring device is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the car measuring device, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Coating Thickness Gauge PCE-CT 80-FN3

US$ 1,332.00

ex. VAT, ex. delivery costs

The coating thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the coating thickness gauge, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Material Tester PCE-CT 80-FN3

US$ 1,332.00

ex. VAT, ex. delivery costs

The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"