Query results | PCE Instruments

US$ 1,327.00

ex. VAT, ex. delivery costs

The Material Tester is used for calibrating torque sensors and for measuring the tightening torque of fasteners. The Material Tester enables precise measurements with an accuracy of ±1%, offers a wide range of unit options, and features extensive memory functions.

Measuring range: 22 ... 220 Nm
Resolution: 0.1 Nm
Accuracy: ±1% of reading
External sensor with 1/2-inch mount
Operating modes: Peak, Max, Real-time
Units: N·m, kgf·cm, lbf·in
Memory for 2000 readings
Includes software for data export
Battery-powered

Material Tester PCE-TWT 50NM

US$ 1,327.00

ex. VAT, ex. delivery costs

Material Tester for calibrating torque sensors and measuring the tightening torque of fasteners. The Material Tester enables precise measurements with an accuracy of ±1%, offers a wide range of unit options, and features extensive memory functions.

Measuring range: 5 ... 50 Nm
Resolution: 0.01 Nm
Accuracy: ±1% of reading
External sensor with 3/8-inch mount
Operating modes: Peak, Max, Real-time
Units: N·m, kgf·cm, lbf·in
Memory for 2000 readings
Includes software for data export
Battery-powered

Torque Meter / Torque Tester PCE-TWT 220NM

US$ 1,327.00

ex. VAT, ex. delivery costs

The Torque Meter / Torque Tester is used for calibrating torque sensors and for measuring the tightening torque of fasteners. The Torque Meter / Torque Tester enables precise measurements with an accuracy of ±1%, offers a wide range of unit options, and features extensive memory functions.

Measuring range: 22 ... 220 Nm
Resolution: 0.1 Nm
Accuracy: ±1% of reading
External sensor with 1/2-inch mount
Operating modes: Peak, Max, Real-time
Units: N·m, kgf·cm, lbf·in
Memory for 2000 readings
Includes software for data export
Battery-powered

Torque Meter / Torque Tester PCE-TWT 50NM

US$ 1,327.00

ex. VAT, ex. delivery costs

Torque Meter / Torque Tester for calibrating torque sensors and measuring the tightening torque of fasteners. The Torque Meter / Torque Tester enables precise measurements with an accuracy of ±1%, offers a wide range of unit options, and features extensive memory functions.

Measuring range: 5 ... 50 Nm
Resolution: 0.01 Nm
Accuracy: ±1% of reading
External sensor with 3/8-inch mount
Operating modes: Peak, Max, Real-time
Units: N·m, kgf·cm, lbf·in
Memory for 2000 readings
Includes software for data export
Battery-powered

Torque Wrench / Nut Runner PCE-TWT 220NM

US$ 1,327.00

ex. VAT, ex. delivery costs

The Torque Wrench / Nut Runner is used for calibrating torque sensors and for measuring the tightening torque of fasteners. The Torque Wrench / Nut Runner enables precise measurements with an accuracy of ±1%, offers a wide range of unit options, and features extensive memory functions.

Measuring range: 22 ... 220 Nm
Resolution: 0.1 Nm
Accuracy: ±1% of reading
External sensor with 1/2-inch mount
Operating modes: Peak, Max, Real-time
Units: N·m, kgf·cm, lbf·in
Memory for 2000 readings
Includes software for data export
Battery-powered

Torque Wrench / Nut Runner PCE-TWT 50NM

US$ 1,327.00

ex. VAT, ex. delivery costs

Torque Wrench / Nut Runner for calibrating torque sensors and measuring the tightening torque of fasteners. The Torque Wrench / Nut Runner enables precise measurements with an accuracy of ±1%, offers a wide range of unit options, and features extensive memory functions.

Measuring range: 5 ... 50 Nm
Resolution: 0.01 Nm
Accuracy: ±1% of reading
External sensor with 3/8-inch mount
Operating modes: Peak, Max, Real-time
Units: N·m, kgf·cm, lbf·in
Memory for 2,000 readings
Includes software for data export
Battery-powered

Universal Testing Machine PCE-TWT 220NM

US$ 1,327.00

ex. VAT, ex. delivery costs

The Universal Testing Machine is used for calibrating torque sensors and for measuring the tightening torque of fasteners. The Universal Testing Machine enables precise measurements with an accuracy of ±1%, offers a wide range of unit options, and features extensive memory functions.

Measuring range: 22 ... 220 Nm
Resolution: 0.1 Nm
Accuracy: ±1% of reading
External sensor with 1/2-inch mount
Operating modes: Peak, Max, Real-time
Units: N·m, kgf·cm, lbf·in
Memory for 2,000 readings
Includes software for data export
Battery-powered

Universal Testing Machine PCE-TWT 50NM

US$ 1,327.00

ex. VAT, ex. delivery costs

Universal Testing Machine for calibrating torque sensors and measuring the tightening torque of fasteners. The Universal Testing Machine enables precise measurements with an accuracy of ±1%, offers a wide range of unit options, and features extensive memory functions.

Measuring range: 5 ... 50 Nm
Resolution: 0.01 Nm
Accuracy: ±1% of reading
External sensor with 3/8-inch mount
Operating modes: Peak, Max, Real-time
Units: N·m, kgf·cm, lbf·in
Memory for 2000 readings
Includes software for data export
Battery-powered

1-Phase-Power Meter PCE-PA6000-ICA incl. ISO Calibration Certificate

US$ 1,320.00

ex. VAT, ex. delivery costs

The 1-Phase-Power Meter PCE-PA6000 power analyzer can be used as a desktop or portable instrument for measuring active power, apparent power, power factor, energy consumption, AC voltage, AC current, DC voltage, DC current, resistance and frequency. The power / performance measurement can be performed with this power analyzer either directly with the supplied test leads, or indirectly by current clamps.

Performance
Power factor
AC voltage and current
DC voltage and current, resistance and frequency
Incl. Data Cable and Test Leads
Software available in the accessories tab
Incl. ISO Calibration Certificate

Adhesion Tester PCE-TM 200

US$ 1,320.00

ex. VAT, ex. delivery costs

The Adhesion Tester is a portable electronic measuring device designed for the precise measurement of tensile stress in threads and linear materials. It is used in the wire and cable, textile and chemical fiber, metal and carbon fiber sectors, as well as in other industries. Stored data can be transferred from the Adhesion Tester to PC software.

Measuring range: 4 ... 200 cN
Resolution: 1 cN
Accuracy: ±2.5% FS
Units: cN, oz, kgf, N, lb
Memory: 41 data sets
Measurement modes: Peak, Real-Time, Hold
Sensor head width: 65 mm
PC software
Measurement on wires, fibers, or textiles

Automotive Tester PCE-CT 80-FN2D5

US$ 1,320.00

ex. VAT, ex. delivery costs

The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Car Measuring Device PCE-CT 80-FN2D5

US$ 1,320.00

ex. VAT, ex. delivery costs

The car measuring device is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the car measuring device, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Coating Thickness Gauge PCE-CT 80-FN2D5

US$ 1,320.00

ex. VAT, ex. delivery costs

The coating thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the coating thickness gauge, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Force Gauge / Digital Force Gauge PCE-TM 200

US$ 1,320.00

ex. VAT, ex. delivery costs

The Force Gauge / Digital Force Gauge is a portable electronic measuring device designed for the precise measurement of tensile stress in threads and linear materials. It is used in the wire and cable, textile and chemical fiber, metal and carbon fiber sectors, as well as in other industries. Stored data can be transferred from the Force Gauge / Digital Force Gauge to PC software.

Measuring range: 4 ... 200 cN
Resolution: 1 cN
Accuracy: ±2.5% FS
Units: cN, oz, kgf, N, lb
Memory: 41 data sets
Measurement modes: Peak, Real-Time, Hold
Sensor head width: 65 mm
PC software
Measurement on wires, fibers, or textiles

Force Sensor PCE-TM 200

US$ 1,320.00

ex. VAT, ex. delivery costs

The Force Sensor is a portable electronic measuring device designed for the precise measurement of tensile stress in threads and linear materials. It is used in the wire and cable, textile and chemical fiber, metal and carbon fiber sectors, as well as in other industries. Stored data can be transferred from the Force Sensor to PC software.

Measuring range: 4 ... 200 cN
Resolution: 1 cN
Accuracy: ±2.5% FS
Units: cN, oz, kgf, N, lb
Memory: 41 data sets
Measurement modes: Peak, Real-Time, Hold
Sensor head width: 65 mm
PC software
Measurement on wires, fibers, or textiles

Material Tester PCE-CT 80-FN2D5

US$ 1,320.00

ex. VAT, ex. delivery costs

The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Material Thickness Meter PCE-CT 80-FN2D5

US$ 1,320.00

ex. VAT, ex. delivery costs

The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Paint Gauge PCE-CT 80-FN2D5

US$ 1,320.00

ex. VAT, ex. delivery costs

The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Paint Thickness Tester PCE-CT 80-FN2D5

US$ 1,320.00

ex. VAT, ex. delivery costs

The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Portable Power Analyzer PCE-PA6000-ICA incl. ISO Calibration Certificate

US$ 1,320.00

ex. VAT, ex. delivery costs

The power analyzer PCE-PA6000 power analyzer can be used as a desktop or portable instrument for measuring active power, apparent power, power factor, energy consumption, AC voltage, AC current, DC voltage, DC current, resistance and frequency. The power / performance measurement can be performed with this power analyzer either directly with the supplied test leads, or indirectly by current clamps.

Performance
Power factor
AC voltage and current
DC voltage and current, resistance and frequency
Incl. Data Cable and Test Leads
Software available in the accessories tab
incl. ISO Calibration Certificate

Power Meter PCE-PA6000-ICA incl. ISO Calibration Certificate

US$ 1,320.00

ex. VAT, ex. delivery costs

The Power Meter PCE-PA6000 power analyzer can be used as a desktop or portable instrument for measuring active power, apparent power, power factor, energy consumption, AC voltage, AC current, DC voltage, DC current, resistance and frequency. The power / performance measurement can be performed with this power analyzer either directly with the supplied test leads, or indirectly by current clamps.

Performance
Power factor
AC voltage and current
DC voltage and current, resistance and frequency
Incl. Data Cable and Test Leads
Software available in the accessories tab
Incl. ISO Calibration Certificate

Power Quality Analyzer PCE-PA6000-ICA incl. ISO Calibration Certificate

US$ 1,320.00

ex. VAT, ex. delivery costs

Performance
Power factor
AC voltage and current
DC voltage and current, resistance and frequency
Incl. Data Cable and Test Leads
Software available in the accessories tab
incl. ISO Calibration Certificate

Surface Tester PCE-CT 80-FN2D5

US$ 1,320.00

ex. VAT, ex. delivery costs

The surface tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the surface tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Tension Dynamometer / Tension Load Cell PCE-TM 200

US$ 1,320.00

ex. VAT, ex. delivery costs

The Tension Dynamometer / Tension Load Cell is a portable electronic measuring device designed for the precise measurement of tensile stress in threads and linear materials. It is used in the wire and cable, textile and chemical fiber, metal and carbon fiber sectors, as well as in other industries. Stored data can be transferred from the Tension Dynamometer / Tension Load Cell to PC software.

Measuring range: 4 ... 200 cN
Resolution: 1 cN
Accuracy: ±2.5% FS
Units: cN, oz, kgf, N, lb
Memory: 41 data sets
Measurement modes: Peak, Real-Time, Hold
Sensor head width: 65 mm
PC software
Measurement on wires, fibers, or textiles

Thickness Gauge PCE-CT 80-FN2D5

US$ 1,320.00

ex. VAT, ex. delivery costs

The thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness gauge, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Thickness Meter PCE-CT 80-FN2D5

US$ 1,320.00

ex. VAT, ex. delivery costs

The thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness meter, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Air Humidity Meter PCE-AQD 20-ICA Incl. ISO Calibration Certificate

US$ 1,314.00

ex. VAT, ex. delivery costs

The air humidity meter is an ideal measuring device for monitoring the air quality at workplaces. The air humidity meter is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function

PM2.5
Humidity
Temperature
CO2
Air pressure
Memory: SD card max. 32 GB
Ideal for workplace monitoring
Alarm function
Incl. ISO calibration certificate

Air Quality Meter PCE-AQD 20-ICA Incl. ISO Calibration Certificate

US$ 1,314.00

ex. VAT, ex. delivery costs

The air quality meter is an ideal measuring device for monitoring the air quality at workplaces. The health and environmental air quality meter is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function

PM2.5
Humidity
Temperature
CO2
Air pressure
Memory: SD card max. 32 GB
Ideal for workplace monitoring
Alarm function
Incl. ISO calibration certificate

Air Quality Station PCE-AQD 20-ICA Incl. ISO Calibration Certificate

US$ 1,314.00

ex. VAT, ex. delivery costs

The air quality station is an ideal measuring device for monitoring the air quality at workplaces. The health and environmental air quality station is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function

PM2.5
Humidity
Temperature
CO2
Air pressure
Memory: SD card max. 32 GB
Ideal for workplace monitoring
Alarm function
Incl. ISO calibration certificate

Carbon Dioxide Meter PCE-AQD 20-ICA Incl. ISO Calibration Certificate

US$ 1,314.00

ex. VAT, ex. delivery costs

The carbon dioxide meter PCE-AQD 20 is an ideal measuring device for monitoring the air quality at workplaces. The health and environmental carbon dioxide meter is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function

PM2.5
Humidity
Temperature
CO2
Air pressure
Memory: SD card max. 32 GB
Ideal for workplace monitoring
Alarm function
Incl. ISO calibration certificate

Climate Meter PCE-AQD 20-ICA Incl. ISO Calibration Certificate

US$ 1,314.00

ex. VAT, ex. delivery costs

The climate meter is an ideal measuring device for monitoring the air quality at workplaces. The climate meter is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function

PM2.5
Humidity
Temperature
CO2
Air pressure
Memory: SD card max. 32 GB
Ideal for workplace monitoring
Alarm function
Incl. ISO calibration certificate

CO2 / Room Climate Data Logger PCE-AQD 20-ICA Incl. ISO Calibration Certificate

US$ 1,314.00

ex. VAT, ex. delivery costs

The CO2 / Room Climate Data Logger PCE-AQD 20 is an ideal measuring device for monitoring the air quality at workplaces. The health and CO2 data logger is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function

PM2.5
Humidity
Temperature
CO2
Air pressure
Memory: SD card max. 32 GB
Ideal for workplace monitoring
Alarm function
Incl. ISO calibration certificate

CO2 Analyzer PCE-AQD 20-ICA Incl. ISO Calibration Certificate

US$ 1,314.00

ex. VAT, ex. delivery costs

The CO2 analyzer PCE-AQD 20 is an ideal measuring device for monitoring the air quality at workplaces. The health and CO2 analyzer is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function

PM2.5
Humidity
Temperature
CO2
Air pressure
Memory: SD card max. 32 GB
Ideal for workplace monitoring
Alarm function
Incl. ISO calibration certificate

Digital Thermometer PCE-AQD 20-ICA Incl. ISO Calibration Certificate

US$ 1,314.00

ex. VAT, ex. delivery costs

The digital thermometer is an ideal measuring device for monitoring the air quality at workplaces. The digital thermometer is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function

PM2.5
Humidity
Temperature
CO2
Air pressure
Memory: SD card max. 32 GB
Ideal for workplace monitoring
Alarm function
Incl. ISO calibration certificate

Dust Measuring Device PCE-AQD 20-ICA Incl. ISO Calibration Certificate

US$ 1,314.00

ex. VAT, ex. delivery costs

The dust measuring device is an ideal measuring device for monitoring the air quality at workplaces. The dust measuring device is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function

PM2.5
Humidity
Temperature
CO2
Air pressure
Memory: SD card max. 32 GB
Ideal for workplace monitoring
Alarm function
Incl. ISO calibration certificate

Dust Monitor PCE-AQD 20-ICA Incl. ISO Calibration Certificate

US$ 1,314.00

ex. VAT, ex. delivery costs

The dust monitor is an ideal measuring device for monitoring the air quality at workplaces. The dust monitor is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function

PM2.5
Humidity
Temperature
CO2
Air pressure
Memory: SD card max. 32 GB
Ideal for workplace monitoring
Alarm function
Incl. ISO calibration certificate