Query results | PCE Instruments

Air Flow Meter KWG1

US$ 133.00

ex. VAT, ex. delivery costs

Additional small air flow meter KWG 1 for PCE-Wind logger. Cup anemometer with impulse output.

Output: 0… 100 Hz
Measurement reading range: 0.9 … 40 m/s
Accuracy: ± 0.5 m/s or 5 % v. M

Automotive Tester PCE-BTE 10

US$ 132.00

ex. VAT, ex. delivery costs

The Automotive Tester enables fast and precise measurement of the actual cold cranking performance of vehicle batteries, as well as analysis of the condition of starter and charging systems. Our Automotive Tester supports various battery types and standards and offers protective functions against reverse polarity and short circuits.

DC voltage: 8 ... 30V
DC current: 100 ... 2000 A (cold cranking)
Starter and charging system test (12V / 24V)
For lead-acid, AGM, gel and EFB batteries
Rapid detection of faulty batteries
Integrated reverse polarity protection
Test standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB
USB data transfer
Battery capacity 30 ... 200 Ah

Electrical Tester PCE-BTE 10

US$ 132.00

ex. VAT, ex. delivery costs

The Electrical Tester enables fast and precise measurement of the actual cold cranking performance of vehicle batteries, as well as analysis of the condition of starter and charging systems. Our Electrical Tester supports various battery types and standards and offers protective functions against reverse polarity and short circuits.

DC voltage: 8 ... 30V
DC current: 100 ... 2000 A (cold cranking)
Starter and charging system test (12V / 24V)
For lead-acid, AGM, gel and EFB batteries
Rapid detection of faulty batteries
Integrated reverse polarity protection
Test standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB
USB data transfer
Battery capacity 30 ... 200 Ah

Temperature Indicator PCE-N24T

US$ 132.00

ex. VAT, ex. delivery costs

The digital temperature indicator PCE-N24T is used for processing signals coming from temperature sensors. Depending on your specific needs, the digital indicator can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the digital indicator is freely scalable, which increases its application possibilities.

Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: PT100, Thermoelement Type J / K (selectable)
Display: 4 digits, red
Digit height: 20 mm

Voltmeter PCE-BTE 10

US$ 132.00

ex. VAT, ex. delivery costs

The Voltmeter enables fast and precise measurement of the actual cold cranking performance of vehicle batteries, as well as analysis of the condition of starter and charging systems. Our Voltmeter supports various battery types and standards and offers protective functions against reverse polarity and short circuits.

DC voltage: 8 ... 30V
DC current: 100 ... 2000 A (cold cranking)
Starter and charging system test (12V / 24V)
For lead-acid, AGM, gel and EFB batteries
Rapid detection of faulty batteries
Integrated reverse polarity protection
Test standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB
USB data transfer
Battery capacity 30 ... 200 Ah

Panel Meter PCE-N24T

US$ 132.00

ex. VAT, ex. delivery costs

The panel meter is used for processing signals coming from temperature sensors. Depending on your specific needs, the panel meter can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the panel meter is freely scalable, which increases its application possibilities.

Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: PT100, Thermoelement Type J / K (selectable)
Display: 4 digits, red
Digit height: 20 mm

General Accessories - Socket Square Insert PCE-MS 27-41

US$ 130.00

ex. VAT, ex. delivery costs

Our robust socket square inserts are specially designed for use with impact wrenches and are ideal for demanding bolting applications. The range covers thread sizes from M16 to M48 and offers the appropriate wrench sizes for a wide variety of applications.

3/4-inch square drive
Wrench size: 41 mm / 1.6 in
Thread size: M27

Climate Meter PCE-FST-100-2006-SMS

US$ 127.00

ex. VAT, ex. delivery costs

The Climate Meter sensor is ideal for monitoring agricultural areas, gardens, green spaces or greenhouses. With the Climate Meter, soil moisture and soil temperature can be precisely recorded in order to optimize irrigation of plants or carry out scientific measurements.

Soil moisture: 0 ... 100%
Resolution: 0.1%
Accuracy: 3% at 0 ... 50% and 5% at 50 ... 100 %
Floor temperature: -30 ... 85°C / -22 ... 185°F
Resolution: 0.1°C / 0.18°F
Accuracy: ±0.5°C / ±0.9°F @25°C / 77°F
Output: RS-485 Modbus RTU
Protection class: IP68

Environmental Meter PCE-FST-100-2006-SMS

US$ 127.00

ex. VAT, ex. delivery costs

The Environmental Meter sensor is ideal for monitoring agricultural areas, gardens, green spaces or greenhouses. With the Environmental Meter, soil moisture and soil temperature can be precisely recorded in order to optimize irrigation of plants or carry out scientific measurements.

Soil moisture: 0 ... 100%
Resolution: 0.1%
Accuracy: 3% at 0 ... 50% and 5% at 50 ... 100 %
Floor temperature: -30 ... 85°C / -22 ... 185°F
Resolution: 0.1°C / 0.18°F
Accuracy: ±0.5°C / ±0.9°F @25°C / 77°F
Output: RS-485 Modbus RTU
Protection class: IP68

Environmental Meter PCE-PH 18

US$ 127.00

ex. VAT, ex. delivery costs

The environmental meter PCE-PH 18 is a environmental meter with a pointed glass electrode. Thanks to this glass electrode, the environmental meter PCE-PH 18 in, for example potting soil, sludge or in viscous liquids, such as in a lye, the pH can be determined.

Measuring range: 0.00 … 14.00 pH
Accuracy: ± 0.1 pH (at 20°C / 68°F), ± 0.2 pH
Resolution: 0.01 pH
Puncture electrode (soft bottoms)
Exchangeable electrode through BNC connection

Environmental Tester PCE-FST-100-2006-SMS

US$ 127.00

ex. VAT, ex. delivery costs

The Environmental Tester sensor is ideal for monitoring agricultural areas, gardens, green spaces or greenhouses. With the Environmental Tester, soil moisture and soil temperature can be precisely recorded in order to optimize irrigation of plants or carry out scientific measurements.

Soil moisture: 0 ... 100%
Resolution: 0.1%
Accuracy: 3% at 0 ... 50% and 5% at 50 ... 100 %
Floor temperature: -30 ... 85°C / -22 ... 185°F
Resolution: 0.1°C / 0.18°F
Accuracy: ±0.5°C / ±0.9°F @25°C / 77°F
Output: RS-485 Modbus RTU
Protection class: IP68

Environmental Tester PCE-PH 18

US$ 127.00

ex. VAT, ex. delivery costs

The environmental tester PCE-PH 18 is a environmental tester with a pointed glass electrode. Thanks to this glass electrode, the environmental tester PCE-PH 18 in, for example potting soil, sludge or in viscous liquids, such as in a lye, the pH can be determined.

Measuring range: 0.00 … 14.00 pH
Accuracy: ± 0.1 pH (at 20°C / 68°F), ± 0.2 pH
Resolution: 0.01 pH
Puncture electrode (soft bottoms)
Exchangeable electrode through BNC connection

Force Gauge / Digital Force Gauge PCE-TWT 30N

US$ 127.00

ex. VAT, ex. delivery costs

The Force Gauge / Digital Force Gauge is a compact, portable precision tool for applications where exact torque values are crucial. It has an easy-to-read display with backlighting that provides clear values even in poor lighting conditions. Our Force Gauge / Digital Force Gauges are primarily used in vehicle construction, mechanical engineering, bicycle assembly and in the electrical and electronics industries.

Torque: 0.01 ... 30 Nm
Resolution: 0.01 Nm
Accuracy: ±2% FS / ±2.5% FS
Units: Nm, kgf cm, lbf ft, lbf in
Internal memory: 999 values
Adjustable alarm

$Handheld Refractometer PCE-0100 Salinity$

Handheld Refractometer PCE-0100 Salinity

US$ 127.00

ex. VAT, ex. delivery costs

PCE-0100 is a handheld refractometer used to determine the salt content or % salinity ppt and salinity SG (specific gravity) of salt water, sea water and other solutions containing a concentration of salt. This portable pocket salinity refractometer has a double scale to allow the user to view both measurement parameters at once.

Measurement range:
0 … 100% salinity ppt, 1.000 … 1.070 salinity SG

Resolution: 1 % or 0.001
Accuracy: ±0.1 %

Humidity Sensor PCE-FST-100-2006-SMS

US$ 127.00

ex. VAT, ex. delivery costs

The Humidity Sensor sensor is ideal for monitoring agricultural areas, gardens, green spaces or greenhouses. With the Humidity Sensor, soil moisture and soil temperature can be precisely recorded in order to optimize irrigation of plants or carry out scientific measurements.

Soil moisture: 0 ... 100%
Resolution: 0.1%
Accuracy: 3% at 0 ... 50% and 5% at 50 ... 100 %
Floor temperature: -30 ... 85°C / -22 ... 185°F
Resolution: 0.1°C / 0.18°F
Accuracy: ±0.5°C / ±0.9°F @25°C / 77°F
Output: RS-485 Modbus RTU
Protection class: IP68

Material Tester PCE-TWT 30N

US$ 127.00

ex. VAT, ex. delivery costs

The Material Tester is a compact, portable precision tool for applications where exact torque values are crucial. It has an easy-to-read display with backlighting that provides clear values even in poor lighting conditions. Our Material Testers are primarily used in vehicle construction, mechanical engineering, bicycle assembly and in the electrical and electronics industries.

Torque: 0.01 ... 30 Nm
Resolution: 0.01 Nm
Accuracy: ±2% FS / ±2.5% FS
Units: Nm, kgf cm, lbf ft, lbf in
Internal memory: 999 values
Adjustable alarm

Moisture Sensor PCE-FST-100-2006-SMS

US$ 127.00

ex. VAT, ex. delivery costs

The Moisture Sensor sensor is ideal for monitoring agricultural areas, gardens, green spaces or greenhouses. With the Moisture Sensor, soil moisture and soil temperature can be precisely recorded in order to optimize irrigation of plants or carry out scientific measurements.

Soil moisture: 0 ... 100%
Resolution: 0.1%
Accuracy: 3% at 0 ... 50% and 5% at 50 ... 100 %
Floor temperature: -30 ... 85°C / -22 ... 185°F
Resolution: 0.1°C / 0.18°F
Accuracy: ±0.5°C / ±0.9°F @25°C / 77°F
Output: RS-485 Modbus RTU
Protection class: IP68

pH Meter PCE-PH 18

US$ 127.00

ex. VAT, ex. delivery costs

The pH meter PCE-PH 18 is a pH meter with a pointed glass electrode. Thanks to this glass electrode, the pH meter PCE-PH 18 in, for example potting soil, sludge or in viscous liquids, such as in a lye, the pH can be determined.

Measuring range: 0.00 … 14.00 pH
Accuracy: ± 0.1 pH (at 20°C / 68°F), ± 0.2 pH
Resolution: 0.01 pH
Puncture electrode (soft bottoms)
Exchangeable electrode through BNC connection

Salt Meter PCE-0100 Salinity

US$ 127.00

ex. VAT, ex. delivery costs

PCE-0100 is a Salt Meter used to determine the salt content or % salinity ppt and salinity SG (specific gravity) of salt water, sea water and other solutions containing a concentration of salt. This portable pocket salinity refractometer has a double scale to allow the user to view both measurement parameters at once.

Measurement range:
0 … 100% salinity ppt, 1.000 … 1.070 salinity SG

Resolution: 1 % or 0.001
Accuracy: ±0.1 %

Temperature Sensor PCE-FST-100-2006-SMS

US$ 127.00

ex. VAT, ex. delivery costs

The Temperature Sensor sensor is ideal for monitoring agricultural areas, gardens, green spaces or greenhouses. With the Temperature Sensor, soil moisture and soil temperature can be precisely recorded in order to optimize irrigation of plants or carry out scientific measurements.

Soil moisture: 0 ... 100%
Resolution: 0.1%
Accuracy: 3% at 0 ... 50% and 5% at 50 ... 100 %
Floor temperature: -30 ... 85°C / -22 ... 185°F
Resolution: 0.1°C / 0.18°F
Accuracy: ±0.5°C / ±0.9°F @25°C / 77°F
Output: RS-485 Modbus RTU
Protection class: IP68

Temperature Sensor PCE-FST-100-2006-SMS

US$ 127.00

ex. VAT, ex. delivery costs

Soil moisture: 0 ... 100%
Resolution: 0.1%
Accuracy: 3% at 0 ... 50% and 5% at 50 ... 100 %
Floor temperature: -30 ... 85°C / -22 ... 185°F
Resolution: 0.1°C / 0.18°F
Accuracy: ±0.5°C / ±0.9°F @25°C / 77°F
Output: RS-485 Modbus RTU
Protection class: IP68

Torque Meter / Torque Tester PCE-TWT 30N

US$ 127.00

ex. VAT, ex. delivery costs

The Torque Meter / Torque Tester is a compact, portable precision tool for applications where exact torque values are crucial. It has an easy-to-read display with backlighting that provides clear values even in poor lighting conditions. Our Torque Meter / Torque Testers are primarily used in vehicle construction, mechanical engineering, bicycle assembly and in the electrical and electronics industries.

Torque: 0.01 ... 30 Nm
Resolution: 0.01 Nm
Accuracy: ±2% FS / ±2.5% FS
Units: Nm, kgf cm, lbf ft, lbf in
Internal memory: 999 values
Adjustable alarm

Torque Wrench PCE-TWT 30N

US$ 127.00

ex. VAT, ex. delivery costs

The Torque Wrench is a compact, portable precision tool for applications where exact torque values are crucial. It has an easy-to-read display with backlighting that provides clear values even in poor lighting conditions. Our Torque Wrench are primarily used in vehicle construction, mechanical engineering, bicycle assembly and in the electrical and electronics industries.

Torque: 0.01 ... 30 Nm
Resolution: 0.01 Nm
Accuracy: ±2% FS / ±2.5% FS
Units: Nm, kgf cm, lbf ft, lbf in
Internal memory: 999 values
Adjustable alarm

Universal Testing Machine PCE-TWT 30N

US$ 127.00

ex. VAT, ex. delivery costs

The Universal Testing Machine is a compact, portable precision tool for applications where exact torque values are crucial. It has an easy-to-read display with backlighting that provides clear values even in poor lighting conditions. Our Universal Testing Machines are primarily used in vehicle construction, mechanical engineering, bicycle assembly and in the electrical and electronics industries.

Torque: 0.01 ... 30 Nm
Resolution: 0.01 Nm
Accuracy: ±2% FS / ±2.5% FS
Units: Nm, kgf cm, lbf ft, lbf in
Internal memory: 999 values
Adjustable alarm

$Water Analysis Meter PCE-0100 Salinity Refractometer$

Water Analysis Meter PCE-0100 Salinity Refractometer

US$ 127.00

ex. VAT, ex. delivery costs

Measurement range: 0 … 100% salinity ppt, 1.000 … 1.070 salinity SG
Resolution: 1 % or 0.001
Accuracy: ±0.1 %

Water Analysis Meter PCE-PH 18

US$ 127.00

ex. VAT, ex. delivery costs

The water analysis meter PCE-PH 18 is a water analysis meter with a pointed glass electrode. Thanks to this glass electrode, the water analysis meter PCE-PH 18 in, for example potting soil, sludge or in viscous liquids, such as in a lye, the pH can be determined.

Measuring range: 0.00 … 14.00 pH
Accuracy: ± 0.1 pH (at 20°C / 68°F), ± 0.2 pH
Resolution: 0.01 pH
Puncture electrode (soft bottoms)
Exchangeable electrode through BNC connection

Air Humidity Meter PCE-HT 72

US$ 126.00

ex. VAT, ex. delivery costs

The air humidity meter is a data logger for temperature and humidity. A memory of 20,010 sets of measurements allows the air humidity meter to use up to several months. The air humidity meter is particularly suitable for measuring tasks where it is not possible for the user to install a software for reading the measured values.

Measuring range Temp.: -30 … 60°C / -22 … 140°F
Measuring range rel. Humidity: 0 … 100% rh
Measurement protocol as PDF
Data export possible as CSV
Readable without software
20,010 sets of measured values can be stored

Climate Meter PCE-HT 72

US$ 126.00

ex. VAT, ex. delivery costs

The climate meter PCE-HT 72 is a data logger for temperature and humidity. A memory of 20,010 sets of measurements allows the climate meter PCE-HT 72 to use up to several months. The PCE-HT 72 climate meter is particularly suitable for measuring tasks where it is not possible for the user to install a software for reading the measured values.

Measuring range Temp.: -30 … 60°C / -22 … 140°F
Measuring range rel. Humidity: 0 … 100% rh
Measurement protocol as PDF
Data export possible as CSV
Readable without software
20,010 sets of measured values can be stored

Data Logger for Temperature and Humidity PCE-HT 72

US$ 126.00

ex. VAT, ex. delivery costs

The data logger for temperature and humidity has a memory of 20,010 sets of measurements, allowing use for up to several months. The data logger for temperature and humidity is particularly suitable for measuring tasks where it is not possible for the user to install a software for reading the measured values.

Measuring range Temp.: -30 … 60°C / -22 … 140°F
Measuring range rel. Humidity: 0 … 100% rh
Measurement protocol as PDF
Data export possible as CSV
Readable without software
20,010 sets of measured values can be stored

Data Logger with USB Interface PCE-HT 72

US$ 126.00

ex. VAT, ex. delivery costs

The data logger with USB interface is a data logger for temperature and humidity. A memory of 20,010 sets of measurements allows the data logger with USB interface to be used up to several months. The data logger with USB interface is particularly suitable for measuring tasks where it is not possible for the user to install a software for reading the measured values.

Measuring range Temp.: -30 … 60°C / -22 … 140°F
Measuring range rel. Humidity: 0 … 100% rh
Measurement protocol as PDF
Data export possible as CSV
Readable without software
20,010 sets of measured values can be stored

Environmental Meter PCE-HT 72

US$ 126.00

ex. VAT, ex. delivery costs

The environmental meter PCE-HT 72 is a data logger for temperature and humidity. A memory of 20,010 sets of measurements allows the environmental meter PCE-HT 72 to use up to several months. The PCE-HT 72 environmental meter is particularly suitable for measuring tasks where it is not possible for the user to install a software for reading the measured values.

Measuring range Temp.: -30 … 60°C / -22 … 140°F
Measuring range rel. Humidity: 0 … 100% rh
Measurement protocol as PDF
Data export possible as CSV
Readable without software
20,010 sets of measured values can be stored

Environmental Tester PCE-HT 72

US$ 126.00

ex. VAT, ex. delivery costs

The environmental tester PCE-HT 72 is a data logger for temperature and humidity. A memory of 20,010 sets of measurements allows the environmental tester PCE-HT 72 to use up to several months. The PCE-HT 72 environmental tester is particularly suitable for measuring tasks where it is not possible for the user to install a software for reading the measured values.

Measuring range Temp.: -30 … 60°C / -22 … 140°F
Measuring range rel. Humidity: 0 … 100% rh
Measurement protocol as PDF
Data export possible as CSV
Readable without software
20,010 sets of measured values can be stored

Food Thermometer PCE-HT 72

US$ 126.00

ex. VAT, ex. delivery costs

The Food Thermometer PCE-HT 72 is a data logger for temperature and humidity. A memory of 20,010 sets of measurements allows the Food Thermometer PCE-HT 72 to use up to several months. The PCE-HT 72 Food Thermometer is particularly suitable for measuring tasks where it is not possible for the user to install a software for reading the measured values.

Measuring range Temp.: -30 … 60°C / -22 … 140°F
Measuring range rel. Humidity: 0 … 100% rh
Measurement protocol as PDF
Data export possible as CSV
Readable without software
20,010 sets of measured values can be stored

Humidity Detector PCE-HT 72

US$ 126.00

ex. VAT, ex. delivery costs

The humidity detector PCE-HT 72 is a data logger for temperature and humidity. A memory of 20,010 sets of measurements allows the humidity detector PCE-HT 72 to use up to several months. The PCE-HT 72 humidity detector is particularly suitable for measuring tasks where it is not possible for the user to install a software for reading the measured values.

Measuring range Temp.: -30 … 60°C / -22 … 140°F
Measuring range rel. Humidity: 0 … 100% rh
Measurement protocol as PDF
Data export possible as CSV
Readable without software
20,010 sets of measured values can be stored

HVAC Meter PCE-HT 72

US$ 126.00

ex. VAT, ex. delivery costs

The HVAC meter PCE-HT 72 is a data logger for temperature and humidity. A memory of 20,010 sets of measurements allows the HVAC meter PCE-HT 72 to use up to several months. The PCE-HT 72 HVAC meter is particularly suitable for measuring tasks where it is not possible for the user to install a software for reading the measured values.

Measuring range Temp.: -30 … 60°C / -22 … 140°F
Measuring range rel. Humidity: 0 … 100% rh
Measurement protocol as PDF
Data export possible as CSV
Readable without software
20,010 sets of measured values can be stored

Hygrometer PCE-HT 72

US$ 126.00

ex. VAT, ex. delivery costs

The hygrometer PCE-HT 72 is a data logger for temperature and humidity. A memory of 20,010 sets of measurements allows the hygrometer PCE-HT 72 to use up to several months. The PCE-HT 72 hygrometer is particularly suitable for measuring tasks where it is not possible for the user to install a software for reading the measured values.

Measuring range Temp.: -30 … 60°C / -22 … 140°F
Measuring range rel. Humidity: 0 … 100% rh
Measurement protocol as PDF
Data export possible as CSV
Readable without software
20,010 sets of measured values can be stored