Query results | PCE Instruments

Panel Indicator PCE-N24Z AC Voltage / Current

US$ 122.00

ex. VAT, ex. delivery costs

The panel indicator is used to display AC parameters. The panel indicator can measure and display AC current, AC voltage or frequencies. The possibility of freely scaling the input signal allows a very versatile use of this panel indicator.

Power supply: 230V, 110V, 24V, 20 … 40V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: 1 … 100V, 2.5 … 250V, 4 … 400V, 20 … 500 Hz, 1 A, 5 A (selectable)
Display: 4 digits, red
Digit height: 20 mm / 0.78"

Panel Meter PCE-N24Z

US$ 122.00

ex. VAT, ex. delivery costs

The panel meter is used to display AC parameters. The panel meter can measure and display AC current, AC voltage or frequencies. The possibility of freely scaling the input signal allows a very versatile use of this panel meter.

Power supply: 230V, 110V, 24V, 20 … 40V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: 1 … 100V, 2.5 … 250V, 4 … 400V, 20 … 500 Hz, 1 A, 5 A (selectable)
Display: 4 digits, red
Digit height: 20 mm / 0.78"

Power Indicator PCE-N24Z

US$ 122.00

ex. VAT, ex. delivery costs

The power indicator is used to display AC parameters. The power indicator can measure and display AC current, AC voltage or frequencies. The possibility of freely scaling the input signal allows a very versatile use of this power indicator.

Power supply: 230V, 110V, 24V, 20 … 40V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: 1 … 100V, 2.5 … 250V, 4 … 400V, 20 … 500 Hz, 1 A, 5 A (selectable)
Display: 4 digits, red
Digit height: 20 mm / 0.78"

Voltage Indicator PCE-N24Z

US$ 122.00

ex. VAT, ex. delivery costs

The voltage indicator is used to display AC parameters. The voltage indicator can measure and display AC current, AC voltage or frequencies. The possibility of freely scaling the input signal allows a very versatile use of this voltage indicator.

Power supply: 230V, 110V, 24V, 20 … 40V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: 1 … 100V, 2.5 … 250V, 4 … 400V, 20 … 500 Hz, 1 A, 5 A (selectable)
Display: 4 digits, red
Digit height: 20 mm / 0.78"

Heat Pump Test Equipment PCE-RVP 120

US$ 121.00

ex. VAT, ex. delivery costs

The Heat Pump Test Equipment is equipped with a reliable motor that provides sufficient torque for stable operation. With a flow rate of 56 l/min, the Heat Pump Test Equipment can quickly evacuate air and moisture from air conditioning systems, cooling systems or heat pumps.

Flow rate: 56 ... 68 l/min
Connection: 1/4 inch
For common refrigerants e.g. R12, R22, R134a ...etc.
Motor power: 0.25 hp (180 W)
Filter element to reduce oil mist

HVAC Meter / HVACR Tester PCE-RVP 120

US$ 121.00

ex. VAT, ex. delivery costs

The HVAC Meter / HVACR Tester is equipped with a reliable motor that provides sufficient torque for stable operation. With a flow rate of 56 l/min, the HVAC Meter / HVACR Tester can quickly evacuate air and moisture from air conditioning systems, cooling systems or heat pumps.

Flow rate: 56 ... 68 l/min
Connection: 1/4 inch
For common refrigerants e.g. R12, R22, R134a ...etc.
Motor power: 0.25 hp (180 W)
Filter element to reduce oil mist

Manometer PCE-RVP 120

US$ 121.00

ex. VAT, ex. delivery costs

The Manometer is equipped with a reliable motor that provides sufficient torque for stable operation. With a flow rate of 56 l/min, the Manometer can quickly evacuate air and moisture from air conditioning systems, cooling systems or heat pumps.

Flow rate: 56 ... 68 l/min
Connection: 1/4 inch
For common refrigerants e.g. R12, R22, R134a ...etc.
Motor power: 0.25 hp (180 W)
Filter element to reduce oil mist

Vacuum pump PCE-RVP 120

US$ 121.00

ex. VAT, ex. delivery costs

The Vacuum pump is equipped with a reliable motor that provides sufficient torque for stable operation. With a flow rate of 56 l/min, the Vacuum pump can quickly evacuate air and moisture from air conditioning systems, cooling systems or heat pumps.

Flow rate: 56 ... 68 l/min
Connection: 1/4 inch
For common refrigerants e.g. R12, R22, R134a ...etc.
Motor power: 0.25 hp (180 W)
Filter element to reduce oil mist

Agricultural measuring device PCE-032-LED with LED Lighting

US$ 120.00

ex. VAT, ex. delivery costs

The different-scale LED Agricultural measuring devices are used for a variety of applications, such as Öchsle for the winegrower or a 0 … 32 Brix scale for measuring coolants, juices and other emulsions.

Measuring range: 0 … 32% Brix
Resolution: 0.2% Brix
Accuracy: ± 0.2%
LED light in the prism cover
Diopter adjustment for focusing
Automatic temperature compensation

Air Humidity Meter PCE-AM 40

US$ 120.00

ex. VAT, ex. delivery costs

The Air Humidity Meter with impeller precisely measures wind speed, volume flow and temperature. Our Air Humidity Meter enables measurements in m/s, km/h, knots and other units and displays the wind force on the Beaufort scale.

Wind speed: 0.06 ... 45 m/s
Resolution: 0.001 m/s
Accuracy: ±(2% v.Mw. +0.2)
Volume flow: 0 ... 9,999 m³/min
Resolution: 0.001 m³/min
Accuracy: ±(2 % of the standard value +0.2)
Air temperature: 0 ... 45°C / 0 ... 113°F
Resolution: 0.1°C / 32.18°F
Accuracy: ±2°C / 3.6°F
Micro-USB interface
Software for data transfer
Memory for 1000 measured values

Air Velocity Meter PCE-AM 40

US$ 120.00

ex. VAT, ex. delivery costs

The Air Velocity Meter with impeller precisely measures wind speed, volume flow and temperature. Our Air Velocity Meter enables measurements in m/s, km/h, knots and other units and displays the wind force on the Beaufort scale.

Wind speed: 0.06 ... 45 m/s
Resolution: 0.001 m/s
Accuracy: ±(2% v.Mw. +0.2)
Volume flow: 0 ... 9,999 m³/min
Resolution: 0.001 m³/min
Accuracy: ±(2 % of the standard value +0.2)
Air temperature: 0 ... 45°C / 0 ... 113°F
Resolution: 0.1°C / 32.18°F
Accuracy: ±2°C / 3.6°F
Micro-USB interface
Software for data transfer
Memory for 1000 measured values

Airflow Meter PCE-AM 40

US$ 120.00

ex. VAT, ex. delivery costs

The Airflow Meter with impeller precisely measures wind speed, volume flow and temperature. Our Airflow Meter enables measurements in m/s, km/h, knots and other units and displays the wind force on the Beaufort scale.

Wind speed: 0.06 ... 45 m/s
Resolution: 0.001 m/s
Accuracy: ±(2% v.Mw. +0.2)
Volume flow: 0 ... 9,999 m³/min
Resolution: 0.001 m³/min
Accuracy: ±(2 % of the standard value +0.2)
Air temperature: 0 ... 45°C / 0 ... 113°F
Resolution: 0.1°C / 32.18°F
Accuracy: ±2°C / 3.6°F
Micro-USB interface
Software for data transfer
Memory for 1000 measured values

Alcohol meter / Breathalyzer PCE-ALC 30

US$ 120.00

ex. VAT, ex. delivery costs

This handy Alcohol meter / Breathalyzer quickly measures the alcohol content and can be easily connected to a smartphone app. Our Alcohol meter / Breathalyzer has a measurement range of 0 ... 4 g/l. Its lightweight and compact design makes it particularly user-friendly.

measurement range: 0 ... 4 g/l
resolution: 0.01 g/l
accuracy: ±0.5 g/l
units: mg/l, g/l, % BAC, ‰ BAC
quick results < 5 s
smartphone app

Anemometer / Anemometers for all applications PCE-AM 40

US$ 120.00

ex. VAT, ex. delivery costs

The Anemometer / Anemometers for all applications with impeller precisely measures wind speed, volume flow and temperature. Our Anemometer / Anemometers for all applications enables measurements in m/s, km/h, knots and other units and displays the wind force on the Beaufort scale.

Wind speed: 0.06 ... 45 m/s
Resolution: 0.001 m/s
Accuracy: ±(2% v.Mw. +0.2)
Volume flow: 0 ... 9,999 m³/min
Resolution: 0.001 m³/min
Accuracy: ±(2 % of the standard value +0.2)
Air temperature: 0 ... 45°C / 0 ... 113°F
Resolution: 0.1°C / 32.18°F
Accuracy: ±2°C / 3.6°F
Micro-USB interface
Software for data transfer
Memory for 1000 measured values

Car Measuring Device PCE-IRM 10

US$ 120.00

ex. VAT, ex. delivery costs

The Car Measuring Device is a compact and easy-to-use device for testing the battery quality of various battery types such as lithium, alkaline and lead-acid batteries. The Car Measuring Device can automatically check the internal resistance and voltage at the same time, with the measurement results clearly shown on the 2.4-inch colour display.

DC voltage: 0 ... 100 V
resolution: 0.0001 V
accuracy: ±0.5 %
resistance: 0 mΩ ... 200 Ω
resolution: 0.01 mΩ
accuracy: ±0.5 %
connections: Kelvin clamps
adjustable limit values
internal memory

Clamp Meter PCE-CM 7

US$ 120.00

ex. VAT, ex. delivery costs

The Clamp Meter is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating current that can be measured without direct contact to the line. The Clamp Meter is suitable for measuring resistance, temperature, diodes, continuity, frequencies and capacitance and is particularly useful for diagnosing electrical and electronic components.

direct voltage: 0.1 mV ... 1000 V
alternating voltage: 0.1 mV ... 750 V
direct current: 0.1 A ... 1000 A
alternating current: 0.1 ... 1000 A
resistance: 0.1 Ω ... 60 MΩ
capacitance: 1 nF ... 100 mF
frequency: 0 Hz ... 10 MHz
temperature sensor: -20 ... 1000°C / −4 … 1832°F
non-contact voltage detection (NCV)
automatic and manual measurement range selection

Clamp Meter PCE-IRM 10

US$ 120.00

ex. VAT, ex. delivery costs

The Clamp Meter is a compact and easy-to-use device for testing the battery quality of various battery types such as lithium, alkaline and lead-acid batteries. The Clamp Meter can automatically check the internal resistance and voltage at the same time, with the measurement results clearly shown on the 2.4-inch colour display.

DC voltage: 0 ... 100 V
resolution: 0.0001 V
accuracy: ±0.5 %
resistance: 0 mΩ ... 200 Ω
resolution: 0.01 mΩ
accuracy: ±0.5 %
connections: Kelvin clamps
adjustable limit values
internal memory

Clamp on Tester PCE-CM 7

US$ 120.00

ex. VAT, ex. delivery costs

The Clamp on Tester is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating current that can be measured without direct contact to the line. The Clamp on Tester is suitable for measuring resistance, temperature, diodes, continuity, frequencies and capacitance and is particularly useful for diagnosing electrical and electronic components.

direct voltage: 0.1 mV ... 1000 V
alternating voltage: 0.1 mV ... 750 V
direct current: 0.1 A ... 1000 A
alternating current: 0.1 ... 1000 A
resistance: 0.1 Ω ... 60 MΩ
capacitance: 1 nF ... 100 mF
frequency: 0 Hz ... 10 MHz
temperature sensor: -20 ... 1000°C / −4 … 1832°F
non-contact voltage detection (NCV)
automatic and manual measurement range selection

Clamp on Tester PCE-DC1

US$ 120.00

ex. VAT, ex. delivery costs

Clamp on Tester for measuring AC current, AC voltage, DC current and frequency. The reduced dimensions of this device allow for measurements to be taken in places with limited access. The backlight display ensures that it is easy to read, even in places with limited light available, such as electrical cabinets or in cabling ducts. The Clamp on Tester (as all the test instruments) comes manufacturer calibrated - ISO certification is available as an option.

AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
DC current: 200 A / 100-mA / ±2.8% + 8 digits
AC test voltage (without contact):100 VAC to 600 VAC at 50 / 60 Hz
Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz / 0.51 to 1 kHz

Clamp on Tester PCE-IRM 10

US$ 120.00

ex. VAT, ex. delivery costs

The Clamp on Tester is a compact and easy-to-use device for testing the battery quality of various battery types such as lithium, alkaline and lead-acid batteries. The Clamp on Tester can automatically check the internal resistance and voltage at the same time, with the measurement results clearly shown on the 2.4-inch colour display.

DC voltage: 0 ... 100 V
resolution: 0.0001 V
accuracy: ±0.5 %
resistance: 0 mΩ ... 200 Ω
resolution: 0.01 mΩ
accuracy: ±0.5 %
connections: Kelvin clamps
adjustable limit values
internal memory

Climate Meter PCE-AM 40

US$ 120.00

ex. VAT, ex. delivery costs

The Climate Meter with impeller precisely measures wind speed, volume flow and temperature. Our Climate Meter enables measurements in m/s, km/h, knots and other units and displays the wind force on the Beaufort scale.

Wind speed: 0.06 ... 45 m/s
Resolution: 0.001 m/s
Accuracy: ±(2% v.Mw. +0.2)
Volume flow: 0 ... 9,999 m³/min
Resolution: 0.001 m³/min
Accuracy: ±(2 % of the standard value +0.2)
Air temperature: 0 ... 45°C / 0 ... 113°F
Resolution: 0.1°C / 32.18°F
Accuracy: ±2°C / 3.6°F
Micro-USB interface
Software for data transfer
Memory for 1000 measured values

Condition Monitoring Noise Meter PCE-324

US$ 120.00

ex. VAT, ex. delivery costs

The Condition Monitoring Noise Meter offers a wide measurement range of 30 to 130 dB (dBA) and 30 to 135 dB (dBC), making it suitable for accurate measurements in various acoustic environments. The accuracy of the device is ±1.5 dB at 94 dB @ 1 kHz and ±5 dB at 94 dB @ 8 kHz. Whether in residential areas, offices, production facilities or other environments, this Condition Monitoring Noise Meter is versatile and delivers accurate results in a wide range of acoustic scenarios.

accuracy class 2
automatic range: 30 ... 130 dB
manual ranges: 30 ... 80 / 60 ... 110 / 80 ... 130 dB
resolution: 0.1 dB
accuracy: ±1.5 dB (94 dB @1 kHz) / ±5 dB (94 dB @8 kHz)
frequency weighting A and C
numerical values and traffic light display

Condition Monitoring Phase Rotation Meter PCE-PI1

US$ 120.00

ex. VAT, ex. delivery costs

This Condition Monitoring Phase Rotation Meter has a robust housing with a large LCD display so you can easily and conveniently determine the phase and motor rotation direction. Furthermore, any problems in individual phases, are displayed on the Condition Monitoring Phase Rotation Meter. The Condition Monitoring Phase Rotation Meter meets the safety standard CAT III 600 V, IEC 61010.

Easy operation
No batteries required
Robust alligator clips for easy connection
3-phase measurements of 40 … 690 V AC
Protection class IP 40

Conductivity Meter PCE-SM 5

US$ 120.00

ex. VAT, ex. delivery costs

The Conductivity Meter is a precise and user-friendly instrument for determining the salt content in solutions, which measures in the units mg and %. The Conductivity Meter offers a measurement range of 0.01 to 5 % with a resolution of 0.01 %.

measurement range: 0.01 ... 5 %
resolution: 0.01 %
accuracy: ± 0.05 % FS (< 2 %), ± 0.1 % FS (2 % ... 5 %)
automatic temperature compensation
quick and accurate measurement in approx. 1 s

Crane Scale PCE-HS 200N

US$ 120.00

ex. VAT, ex. delivery costs

The crane scale is available with a measuring range of 0 … 200 kg / 440.9 lbs. With an accuracy of ± 1% of the measuring range, the crane scale is a precise measuring device. The LCD display of the crane scale has a digit height of 22 mm and is backlit.

Measuring range: 0 … 200 kg / 0 … 440.9 lbs
Resolution: 50 g
Accuracy: ± 1% of full scale
Units: kg, lb, N
Including shackles and hooks

Crane Scale PCE-HS 60N

US$ 120.00

ex. VAT, ex. delivery costs

The crane scale is available with a measuring range of 0 … 60 kg / 0 … 132 lbs. With an accuracy of ± 1% of the measuring range, the hanging balance is a precise measuring device. The LCD display of the crane scale has a digit height of 22 mm and is backlit.

Measuring range: 0 … 60 kg / 0 … 132 lbs
Resolution: 20 g
Accuracy: ± 1% of full scale
Units: kg, lb, N
Including shackles and hooks

Current Clamp PCE-CM 7

US$ 120.00

ex. VAT, ex. delivery costs

The Current Clamp is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating current that can be measured without direct contact to the line. The Current Clamp is suitable for measuring resistance, temperature, diodes, continuity, frequencies and capacitance and is particularly useful for diagnosing electrical and electronic components.

direct voltage: 0.1 mV ... 1000 V
alternating voltage: 0.1 mV ... 750 V
direct current: 0.1 A ... 1000 A
alternating current: 0.1 ... 1000 A
resistance: 0.1 Ω ... 60 MΩ
capacitance: 1 nF ... 100 mF
frequency: 0 Hz ... 10 MHz
temperature sensor: -20 ... 1000°C / −4 … 1832°F
non-contact voltage detection (NCV)
automatic and manual measurement range selection

Current Clamp PCE-DC1

US$ 120.00

ex. VAT, ex. delivery costs

The Current Clamp has been designed to detect, indirectly, AC/DC current and frequency. The Current Clamp has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.

AC current (50/60 Hz): 200 A / 100-mA / ±3.0% + 8 digits
DC current:200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
AC test voltage (without contact):100 VAC to 600 VAC 50 / 60 Hz
Frequency: 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

Data Logger / Data Logging Instrument PCE-AM 40

US$ 120.00

ex. VAT, ex. delivery costs

The Data Logger / Data Logging Instrument with impeller precisely measures wind speed, volume flow and temperature. Our Data Logger / Data Logging Instrument enables measurements in m/s, km/h, knots and other units and displays the wind force on the Beaufort scale.

Wind speed: 0.06 ... 45 m/s
Resolution: 0.001 m/s
Accuracy: ±(2% v.Mw. +0.2)
Volume flow: 0 ... 9,999 m³/min
Resolution: 0.001 m³/min
Accuracy: ±(2 % of the standard value +0.2)
Air temperature: 0 ... 45°C / 0 ... 113°F
Resolution: 0.1°C / 32.18°F
Accuracy: ±2°C / 3.6°F
Micro-USB interface
Software for data transfer
Memory for 1000 measured values

Data Logger for Temperature and Humidity PCE-AM 40

US$ 120.00

ex. VAT, ex. delivery costs

The Data Logger for Temperature and Humidity with impeller precisely measures wind speed, volume flow and temperature. Our Data Logger for Temperature and Humidity enables measurements in m/s, km/h, knots and other units and displays the wind force on the Beaufort scale.

Wind speed: 0.06 ... 45 m/s
Resolution: 0.001 m/s
Accuracy: ±(2% v.Mw. +0.2)
Volume flow: 0 ... 9,999 m³/min
Resolution: 0.001 m³/min
Accuracy: ±(2 % of the standard value +0.2)
Air temperature: 0 ... 45°C / 0 ... 113°F
Resolution: 0.1°C / 32.18°F
Accuracy: ±2°C / 3.6°F
Micro-USB interface
Software for data transfer
Memory for 1000 measured values

Data Logger with USB Interface PCE-AM 40

US$ 120.00

ex. VAT, ex. delivery costs

The Data Logger with USB Interface with impeller precisely measures wind speed, volume flow and temperature. Our Data Logger with USB Interface enables measurements in m/s, km/h, knots and other units and displays the wind force on the Beaufort scale.

Wind speed: 0.06 ... 45 m/s
Resolution: 0.001 m/s
Accuracy: ±(2% v.Mw. +0.2)
Volume flow: 0 ... 9,999 m³/min
Resolution: 0.001 m³/min
Accuracy: ±(2 % of the standard value +0.2)
Air temperature: 0 ... 45°C / 0 ... 113°F
Resolution: 0.1°C / 32.18°F
Accuracy: ±2°C / 3.6°F
Micro-USB interface
Software for data transfer
Memory for 1000 measured values

Digital Multimeter PCE-CM 7

US$ 120.00

ex. VAT, ex. delivery costs

The Digital Multimeter is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating current that can be measured without direct contact to the line. The Digital Multimeter is suitable for measuring resistance, temperature, diodes, continuity, frequencies and capacitance and is particularly useful for diagnosing electrical and electronic components.

direct voltage: 0.1 mV ... 1000 V
alternating voltage: 0.1 mV ... 750 V
direct current: 0.1 A ... 1000 A
alternating current: 0.1 ... 1000 A
resistance: 0.1 Ω ... 60 MΩ
capacitance: 1 nF ... 100 mF
frequency: 0 Hz ... 10 MHz
temperature sensor: -20 ... 1000°C / −4 … 1832°F
non-contact voltage detection (NCV)
automatic and manual measurement range selection

Digital Thermometer PCE-AM 40

US$ 120.00

ex. VAT, ex. delivery costs

The Digital Thermometer with impeller precisely measures wind speed, volume flow and temperature. Our Digital Thermometer enables measurements in m/s, km/h, knots and other units and displays the wind force on the Beaufort scale.

Wind speed: 0.06 ... 45 m/s
Resolution: 0.001 m/s
Accuracy: ±(2% v.Mw. +0.2)
Volume flow: 0 ... 9,999 m³/min
Resolution: 0.001 m³/min
Accuracy: ±(2 % of the standard value +0.2)
Air temperature: 0 ... 45°C / 0 ... 113°F
Resolution: 0.1°C / 32.18°F
Accuracy: ±2°C / 3.6°F
Micro-USB interface
Software for data transfer
Memory for 1000 measured values

Electrical Tester PCE-DC1

US$ 120.00

ex. VAT, ex. delivery costs

The Electrical Tester has been designed to detect, indirectly, AC/DC current and frequency. The Electrical Tester has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.

AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
DC current: 200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
AC test voltage (without contact):100 VAC to 600 VAC 50 / 60 Hz
Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

Environmental Meter PCE-324

US$ 120.00

ex. VAT, ex. delivery costs

The Environmental Meter offers a wide measurement range of 30 to 130 dB (dBA) and 30 to 135 dB (dBC), making it suitable for accurate measurements in various acoustic environments. The accuracy of the device is ±1.5 dB at 94 dB @ 1 kHz and ±5 dB at 94 dB @ 8 kHz. Whether in residential areas, offices, production facilities or other environments, this Environmental Meter is versatile and delivers accurate results in a wide range of acoustic scenarios.

accuracy class 2
automatic range: 30 ... 130 dB
manual ranges: 30 ... 80 / 60 ... 110 / 80 ... 130 dB
resolution: 0.1 dB
accuracy: ±1.5 dB (94 dB @1 kHz) / ±5 dB (94 dB @8 kHz)
frequency weighting A and C
numerical values and traffic light display

Environmental Meter PCE-AM 40

US$ 120.00

ex. VAT, ex. delivery costs

The Environmental Meter with impeller precisely measures wind speed, volume flow and temperature. Our Environmental Meter enables measurements in m/s, km/h, knots and other units and displays the wind force on the Beaufort scale.

Wind speed: 0.06 ... 45 m/s
Resolution: 0.001 m/s
Accuracy: ±(2% v.Mw. +0.2)
Volume flow: 0 ... 9,999 m³/min
Resolution: 0.001 m³/min
Accuracy: ±(2 % of the standard value +0.2)
Air temperature: 0 ... 45°C / 0 ... 113°F
Resolution: 0.1°C / 32.18°F
Accuracy: ±2°C / 3.6°F
Micro-USB interface
Software for data transfer
Memory for 1000 measured values