Products for 'Thickness Gauge PCE CT 90 ICA Incl. ISO Calibration Certificate '

Coating Thickness Gauge PCE-CT 80-FN0D5-ICA incl. ISO Calibration Certificate

US$ 1,105.00

ex. VAT, ex. delivery costs

The coating thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the coating thickness gauge, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO Calibration Certificate

Thickness Gauge PCE-CT 80-FN0D5-ICA incl. ISO Calibration Certificate

US$ 1,105.00

ex. VAT, ex. delivery costs

The thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness gauge, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO Calibration Certificate

Thickness Meter PCE-CT 80-FN0D5-ICA incl. ISO Calibration Certificate

US$ 1,105.00

ex. VAT, ex. delivery costs

The thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness meter, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO Calibration Certificate

Material Thickness Meter PCE-CT 80-FN0D5-ICA incl. ISO Calibration Certificate

US$ 1,105.00

ex. VAT, ex. delivery costs

The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO Calibration Certificate

Paint Gauge PCE-CT 80-FN0D5-ICA incl. ISO Calibration Certificate

US$ 1,105.00

ex. VAT, ex. delivery costs

The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO Calibration Certificate

Thickness Gauge PCE-TG 150A-ICA incl. ISO calibration certificate

US$ 1,069.00

ex. VAT, ex. delivery costs

The thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the thickness gauge.

Measuring range: 1.00 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of Mw. + 0.05 mm
Memory capacity: 1500 measured values

Calibration reference on housing
incl. ISO calibration certificate

Ultrasonic Wall Thickness Gauges PCE-TG 150A-ICA incl. ISO calibration certificate

US$ 1,069.00

ex. VAT, ex. delivery costs

The ultrasonic wall thickness gauges can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the ultrasonic wall thickness gauges.

Measuring range: 1.00 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of Mw. + 0.05 mm
Memory capacity: 1500 measured values

Calibration reference on housing
incl. ISO calibration certificate

Paint Thickness Tester PCE-CT 80-FN0D5-ICA incl. ISO Calibration Certificate

US$ 1,105.00

ex. VAT, ex. delivery costs

The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO Calibration Certificate

Paint Thickness Gauge PCE-TG 150A-ICA incl. ISO calibration certificate

US$ 1,069.00

ex. VAT, ex. delivery costs

The paint thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the paint thickness gauge.

Measuring range: 1.00 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of Mw. + 0.05 mm
Memory capacity: 1500 measured values

Calibration reference on housing
incl. ISO calibration certificate

Thickness Meter PCE-TG 150A-ICA incl. ISO calibration certificate

US$ 1,069.00

ex. VAT, ex. delivery costs

The thickness meter can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the thickness meter.

Measuring range: 1.00 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of Mw. + 0.05 mm
Memory capacity: 1500 measured values

Calibration reference on housing
incl. ISO calibration certificate

Wall Thickness Meter PCE-TG 150A-ICA incl. ISO calibration certificate

US$ 1,069.00

ex. VAT, ex. delivery costs

The wall thickness meter can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the wall thickness meter.

Measuring range: 1.00 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of Mw. + 0.05 mm
Memory capacity: 1500 measured values

Calibration reference on housing
incl. ISO calibration certificate

Coating Thickness Gauge PCE-CT 80-F5N3

US$ 1,185.00

ex. VAT, ex. delivery costs

Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Coating Thickness Gauge PCE-CT 80-FN3

US$ 1,172.00

ex. VAT, ex. delivery costs

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Coating Thickness Gauge PCE-CT 80-FN2D5

US$ 1,161.00

ex. VAT, ex. delivery costs

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Coating Thickness Gauge PCE-CT 80-FN2

US$ 1,146.00

ex. VAT, ex. delivery costs

Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Coating Thickness Gauge PCE-CT 80-FN1D5

US$ 1,132.00

ex. VAT, ex. delivery costs

Measuring range: Fe: 0 … 1500 µm, NFe: 0 … 1500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Surface Tester PCE-CT 80-FN0D5-ICA incl. ISO Calibration Certificate

US$ 1,105.00

ex. VAT, ex. delivery costs

The surface tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the surface tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO Calibration Certificate

Automotive Tester PCE-CT 80-FN0D5-ICA incl. ISO Calibration Certificate

US$ 1,105.00

ex. VAT, ex. delivery costs

The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO Calibration Certificate

Material Tester PCE-CT 80-FN0D5-ICA incl. ISO Calibration Certificate

US$ 1,105.00

ex. VAT, ex. delivery costs

The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO Calibration Certificate

Car Measuring Device PCE-CT 80-FN0D5-ICA incl. ISO Calibration Certificate

US$ 1,105.00

ex. VAT, ex. delivery costs

The car measuring device is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the car measuring device, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
Accuracy after foil calibration: ±(1% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"
incl. ISO Calibration Certificate

Material Thickness Meter PCE-TG 150A-ICA incl. ISO calibration certificate

US$ 1,069.00

ex. VAT, ex. delivery costs

The material thickness meter can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the material thickness meter.

Measuring range: 1.00 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of Mw. + 0.05 mm
Memory capacity: 1500 measured values

Calibration reference on housing
incl. ISO calibration certificate

Thickness Gauge PCE-CT 80-FN3

US$ 1,172.00

ex. VAT, ex. delivery costs

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Thickness Gauge PCE-CT 80-FN2D5

US$ 1,161.00

ex. VAT, ex. delivery costs

Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Thickness Gauge PCE-CT 80-FN2

US$ 1,146.00

ex. VAT, ex. delivery costs

Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Force Gauge PCE-CS 5000N-ICA incl. ISO Calibration Certificate

US$ 1,143.00

ex. VAT, ex. delivery costs

PCE-CS 5000N-ICA is a digital battery-powered force gauge that displays measurement values in kilograms (kg) or pounds (lbs). The force gauge includes a hook, shackle, remote control and ISO calibration certificate.

Maximum weighing capacity: 5000 kg / 11023 lbs ≈ 5 Tons
Resolution: 1 kg
Tare range: 100% full scale
Includes ISO calibration certificate

Thickness Gauge PCE-CT 80-F5N3

US$ 1,185.00

ex. VAT, ex. delivery costs

Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Thickness Gauge PCE-CT 80-FN1D5

US$ 1,132.00

ex. VAT, ex. delivery costs

Measuring range: Fe: 0 … 1500 µm, NFe: 0 … 1500 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Force Gauge PCE-HFG 10K-ICA Incl. ISO Calibration Certificate

US$ 1,039.00

ex. VAT, ex. delivery costs

A force gauge is based on the principle that the force acting on the pressure adapter is measured hydraulically. The hydraulic pressure generated is displayed by the force gauge on a scale in Newtons.

Measuring range: 0… 10,000 N / 2,248 lbs
Resolution: 200 N / 45 lbs
Measuring accuracy: ±1.95% f. R.
Incl. ISO calibration certificate

Force Gauge PCE-HFG 25K-ICA Incl. ISO Calibration Certificate

US$ 1,029.00

ex. VAT, ex. delivery costs

Measuring range: 0… 25,000 N / 5,620 lbs
Resolution: 1000 N / 224.8 lbs
Measuring accuracy: ±1.95% f. R.
Incl. ISO calibration certificate

Force Gauge PCE-CS 3000N-ICA incl. ISO Calibration Certificate

US$ 1,142.00

ex. VAT, ex. delivery costs

PCE-CS 3000N-ICA is a digital, rechargeable battery-powered, heavy-duty force gauge that displays measurement values in kilograms (kg) or pounds (lbs). The force gauge includes a hook, shackle, remote control and ISO calibration certificate.

Maximum weighing capacity: 3000 kg / 6613 lbs ≈ 3 Tons
Resolution: 0.5 kg
Tare range: 100 % full scale
Includes hook, shackle, and remote control
Includes ISO calibration certificate

Force Gauge PCE-HFG 2.5K-ICA Incl. ISO Calibration Certificate

US$ 1,029.00

ex. VAT, ex. delivery costs

Measuring range: 0… 2,500 N / 562 lbs
Resolution: 100 N / 22.5 lbs
Measuring accuracy: ±1.95% f. R.
Incl. ISO calibration certificate

Force Gauge PCE-HFG 1K-ICA Incl. ISO Calibration Certificate

US$ 1,029.00

ex. VAT, ex. delivery costs

Measuring range: 0… 1,000 N / 225 lbs
Resolution: 20 N / 4.5 lbs
Measuring accuracy: ±2.5% of the measuring range
Incl. ISO calibration certificate

NDT Tester - Thickness Meter PCE-TG 150A-ICA incl. ISO calibration certificate

US$ 1,069.00

ex. VAT, ex. delivery costs

The NDT tester - thickness Meter can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the NDT tester - thickness Meter.

Measuring range: 1.00 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of Mw. + 0.05 mm
Memory capacity: 1500 measured values

Calibration reference on housing
incl. ISO calibration certificate

Paint Thickness Tester PCE-TG 150A-ICA incl. ISO calibration certificate

US$ 1,069.00

ex. VAT, ex. delivery costs

The paint thickness tester can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the paint thickness tester.

Measuring range: 1.00 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of Mw. + 0.05 mm
Memory capacity: 1500 measured values

Calibration reference on housing
incl. ISO calibration certificate

Ultrasonic Thickness Tester PCE-TG 150A-ICA incl. ISO calibration certificate

US$ 1,069.00

ex. VAT, ex. delivery costs

The ultrasonic thickness tester can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the ultrasonic thickness tester.

Measuring range: 1.00 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of Mw. + 0.05 mm
Memory capacity: 1500 measured values

Calibration reference on housing
incl. ISO calibration certificate

Condition Monitoring Ultrasonic Material Thickness Meter PCE-TG 150A-ICA incl. ISO calibration certificate

US$ 1,069.00

ex. VAT, ex. delivery costs

The Condition Monitoring Ultrasonic Material Thickness Meter can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the Condition Monitoring Ultrasonic Material Thickness Meter.

Measuring range: 1.00 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of Mw. + 0.05 mm
Memory capacity: 1500 measured values

Calibration reference on housing
incl. ISO calibration certificate