Query results | PCE Instruments

US$ 1,183.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Automotive Tester. The Automotive Tester is equipped with 8 high-power UVA LEDs, which together generate a light intensity of 4617 μW/cm² at a distance of 30 cm. The stroboscope allows you to set the flash frequency in both FPM and Hz.

8 UVA high-performance LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment via x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode

Car Measuring Device PCE-LES 308UV-385

US$ 1,183.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Car Measuring Device. The Car Measuring Device is equipped with 8 high-power UVA LEDs, which together generate a light intensity of 4617 μW/cm² at a distance of 30 cm. The stroboscope allows you to set the flash frequency in both FPM and Hz.

8 UVA high-performance LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment via x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode

Condition Monitoring Data Logging Device PCE-NDL 10-ICA incl. ISO Cal. Cert.

US$ 1,183.00

ex. VAT, ex. delivery costs

The condition monitoring data logging device is used to determine volume. The condition monitoring data logging device is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the condition monitoring data logging device. In addition, the condition monitoring data logging device has an SD card slot that enables the use of an SD card as an additional storage medium.

Measuring range: SPL: Auto 30 … 130 dB
Resolution: 0.1 dB
Low sampling rate
Automatic or manual storage
Selectable storage interval
Backlit LC display
Dose measurement or SPL measurement

Condition Monitoring Stroboscope PCE-LES 308UV-385

US$ 1,183.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Condition Monitoring Stroboscope. The Condition Monitoring Stroboscope is equipped with 8 high-power UVA LEDs, which together generate a light intensity of 4617 μW/cm² at a distance of 30 cm. The Condition Monitoring Stroboscope allows you to set the flash frequency in both FPM and Hz. And it is small and handy in pocket size and also mains-independent thanks to the rechargeable battery.

8 UVA high-performance LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment via x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode

Data-Logging Decibel Meter PCE-NDL 10-ICA incl. ISO Calibration Certificate

US$ 1,183.00

ex. VAT, ex. delivery costs

The data-logging decibel meter is used to determine volume. The PCE-NDL 10 data-logging decibel meter is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the data-logging decibel meter has an SD card slot that enables the use of an SD card as an additional storage medium.

Measuring range: SPL: Auto 30 … 130 dB
Resolution: 0.1 dB
Low sampling rate
Automatic or manual storage
Selectable storage interval
Backlit LC display
Dose measurement or SPL measurement

Data-Logging Noise Meter / Sound Meter PCE-NDL 10-ICA incl ISO Calibration Cert.

US$ 1,183.00

ex. VAT, ex. delivery costs

The data-logging noise meter / sound meter is used to determine volume. The PCE-NDL 10 data-logging noise meter / sound meter is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the data-logging noise meter / sound meter has an SD card slot that enables the use of an SD card as an additional storage medium.

Measuring range: SPL: Auto 30 … 130 dB
Resolution: 0.1 dB
Low sampling rate
Automatic or manual storage
Selectable storage interval
Backlit LC display
Dose measurement or SPL measurement

Data-Logging Sound Level Meter PCE-NDL 10-ICA incl. ISO Calibration Certificate

US$ 1,183.00

ex. VAT, ex. delivery costs

The data-logging sound level meter is used to determine volume. The PCE-NDL 10 data-logging sound level meter is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the data-logging sound level meter has an SD card slot that enables the use of an SD card as an additional storage medium.

Measuring range: SPL: Auto 30 … 130 dB
Resolution: 0.1 dB
Low sampling rate
Automatic or manual storage
Selectable storage interval
Backlit LC display
Dose measurement or SPL measurement

dB Data Logger PCE-NDL 10-ICA incl. ISO Calibration Certificate

US$ 1,183.00

ex. VAT, ex. delivery costs

The dB data logger is used to determine volume. The PCE-NDL 10 dB data logger is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the dB data logger has an SD card slot that enables the use of an SD card as an additional storage medium.

Measuring range: SPL: Auto 30 … 130 dB
Resolution: 0.1 dB
Low sampling rate
Automatic or manual storage
Selectable storage interval
Backlit LC display
Dose measurement or SPL measurement

Electrical Tester PCE-MO 2006-ICA incl. ISO calibration certificate

US$ 1,183.00

ex. VAT, ex. delivery costs

The electrical tester is a compact and precise measuring device with 5 selectable scale ranges for measuring resistances. By using the 4-wire measuring method for mΩ measurements, the electrical tester guarantees accurate and reliable results, even with the smallest resistances.

Measuring range: 0 mΩ … 2,000 Ω
Accuracy: ± 0.8 % of Mw.
Resolution: 0.1 mΩ
5 selectable measuring ranges
Test current: 1 mA, 10 mA, 100 mA

Internal memory
incl. ISO calibration certificate

Handheld Tachometer PCE-LES 308UV-385

US$ 1,183.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Handheld Tachometer. The Handheld Tachometer is equipped with 8 high-power UVA LEDs, which together generate a light intensity of 4617 μW/cm² at a distance of 30 cm.

8 UVA high-performance LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment via x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode

Milliohmmeter PCE-MO 2006-ICA incl. ISO calibration certificate

US$ 1,183.00

ex. VAT, ex. delivery costs

The milliohmmeter is a compact and precise measuring device with 5 selectable scale ranges for measuring resistances. By using the 4-wire measuring method for mΩ measurements, the milliohmmeter guarantees accurate and reliable results, even with the smallest resistances.

Measuring range: 0 mΩ … 2,000 Ω
Accuracy: ± 0.8 % of Mw.
Resolution: 0.1 mΩ
5 selectable measuring ranges
Test current: 1 mA, 10 mA, 100 mA
Internal memory
incl. ISO calibration certificate

Milliohmmeter PCE-MO 2006-ICA incl. ISO calibration certificate

US$ 1,183.00

ex. VAT, ex. delivery costs

Measuring range: 0 mΩ … 2,000 Ω
Accuracy: ± 0.8 % of Mw.
Resolution: 0.1 mΩ
5 selectable measuring ranges
Test current: 1 mA, 10 mA, 100 mA

Internal memory
incl. ISO calibration certificate

Rotation Meter PCE-LES 308UV-385

US$ 1,183.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Rotation Meter. The Rotation Meter is equipped with 8 high-power UVA LEDs, which together generate a light intensity of 4617 μW/cm² at a distance of 30 cm. The stroboscope allows you to set the flash frequency in both FPM and Hz.

8 UVA high-performance LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment via x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode

Sound Dose Meter PCE-NDL 10-ICA incl. ISO Calibration Certificate

US$ 1,183.00

ex. VAT, ex. delivery costs

The data-logging Sound Dose Meter is used to determine volume. The PCE-NDL 10 data-logging Sound Dose Meter is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measurement data memory on the noise dosimeter. In addition, the data-logging Sound Dose Meter has an SD card slot that enables the use of an SD card as an additional storage medium.

Measuring range: SPL: Auto 30 … 130 dB
Resolution: 0.1 dB
Low sampling rate
Automatic or manual storage
Selectable storage interval
Backlit LC display
Dose measurement or SPL measurement

Stroboscope / Stroboscope Light PCE-LES 308UV-385

US$ 1,183.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Stroboscope / Stroboscope Light. The Stroboscope / Stroboscope Light is equipped with 8 high-power UVA LEDs, which together generate a light intensity of 4617 μW/cm² at a distance of 30 cm.

8 UVA high-performance LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment via x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode

Tachometer PCE-LES 308UV-385

US$ 1,183.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Tachometer. The Tachometer is equipped with 8 high-power UVA LEDs, which together generate a light intensity of 4617 μW/cm² at a distance of 30 cm. The stroboscope allows you to set the flash frequency in both FPM and Hz.

8 UVA high-performance LEDs
light colour: 380 ... 390 nm
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment via x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode

Ash Content Analyzer / Incinerator PCE-UX 052

US$ 1,182.00

ex. VAT, ex. delivery costs

The Ash Content Analyzer / Incinerator is a cost-effective and powerful alternative to conventional high-temperature furnaces. Developed for the incineration of individual samples up to a maximum temperature of 610 °C, this device is ideal for determining the ash content, the incineration residue and for treating all organic and inorganic materials.

radiator power: 375 W
temperature range up to approx. 610 °C
sample volume: max. 130 cm³
max. pan size: ⌀75 mm x 30 mm height
operating voltage: 230 V

Fast incinerator / Rapid incinerator PCE-UX 052

US$ 1,182.00

ex. VAT, ex. delivery costs

The Fast incinerator / Rapid incinerator is a cost-effective and powerful alternative to conventional high-temperature furnaces. Developed for the incineration of individual samples up to a maximum temperature of 610 °C, this device is ideal for determining the ash content, the incineration residue and for treating all organic and inorganic materials.

radiator power: 375 W
temperature range up to approx. 610 °C
sample volume: max. 130 cm³
max. pan size: ⌀75 mm x 30 mm height
operating voltage: 230 V

Heating Mantle PCE-UX 052

US$ 1,182.00

ex. VAT, ex. delivery costs

The Heating Mantle is a cost-effective and powerful alternative to conventional high-temperature furnaces. Developed for the incineration of individual samples up to a maximum temperature of 610 °C, this device is ideal for determining the ash content, the incineration residue and for treating all organic and inorganic materials. This infrared Heating Mantle is used in conjunction with moisture analysers, for example, to determine the incineration residue or ash content by annealing or incinerating the dry substance after the determination of dry matter, e.g. in sewage treatment plants, in the chemical or paper industry and many other areas.

radiator power: 375 W
temperature range up to approx. 610 °C
sample volume: max. 130 cm³
max. pan size: ⌀75 mm x 30 mm height
operating voltage: 230 V

Analytical Balance PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,181.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this analytical balance is ideally suited for checking small samples for their weight. For example, powder can be weighed with the analytical balance. Typical areas of application for the analytical balance are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Benchtop Scale PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,181.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this benchtop scale is ideally suited for checking small samples for their weight. For example, powder can be weighed with the benchtop scale. Typical areas of application for the benchtop scale are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Checkweighing Scale PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,181.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this checkweighing scale is ideally suited for checking small samples for their weight. For example, powder can be weighed with the checkweighing scale. Typical areas of application for the checkweighing scale are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Counting Scales PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,181.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, these counting scales are ideally suited for checking small samples for their weight. For example, powder can be weighed with these counting scales. Typical areas of application for the counting scales are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Industrial Scale PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,181.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this industrial scale is ideally suited for checking small samples for their weight. For example, powder can be weighed with the industrial scale. Typical areas of application for the industrial scale are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Inventory Scale PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,181.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this inventory scale is ideally suited for checking small samples for their weight. For example, powder can be weighed with the inventory scale. Typical areas of application for the inventory scale are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

LAB Scale PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,181.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this LAB scale is ideally suited for checking small samples for their weight. For example, powder can be weighed with the LAB scale. Typical areas of application for the laboratory scale are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Laboratory Balance PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,181.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this laboratory balance is ideally suited for checking small samples for their weight. For example, powder can be weighed with the laboratory balance. Typical areas of application for the laboratory balance are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Precision Balance PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,181.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this precision balance is ideally suited for checking small samples for their weight. For example, powder can be weighed with the precision balance. Typical areas of application for the precision balance are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Tabletop Scale PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,181.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this tabletop scale is ideally suited for checking small samples for their weight. For example, powder can be weighed with the tabletop scale. Typical areas of application for the tabletop scale are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Automotive Tester PCE-LES 308

US$ 1,176.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Automotive Tester. The Automotive Tester is equipped with 8 high-power LEDs, which together generate a light intensity of 17670 lux at 20 cm / 1000 Hz.
The Automotive Tester allows you to set the flash frequency in both FPM and Hz. The Automotive Tester is pocket sized, small and also mains-independent thanks to the rechargeable battery.

bright 8 high power LEDs
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
9150 lux at 30 cm / 1000 Hz
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment using x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode

Car Measuring Device PCE-LES 308

US$ 1,176.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Car Measuring Device. The Car Measuring Device is equipped with 8 high-power LEDs, which together generate a light intensity of 17670 lux at 20 cm / 1000 Hz.
The Car Measuring Device allows you to set the flash frequency in both FPM and Hz. The Car Measuring Device is pocket sized, small and also mains-independent thanks to the rechargeable battery.

bright 8 high power LEDs
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
9150 lux at 30 cm / 1000 Hz
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment using x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode

Condition Monitoring Stroboscope PCE-LES 308

US$ 1,176.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Condition Monitoring Stroboscope. The Condition Monitoring Stroboscope is equipped with 8 high-power LEDs, which together generate a light intensity of 17670 lux at 20 cm / 1000 Hz.
The Condition Monitoring Stroboscope allows you to set the flash frequency in both FPM and Hz. The Condition Monitoring Stroboscope is pocket sized, small and also mains-independent thanks to the rechargeable battery.

bright 8 high power LEDs
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
9150 lux at 30 cm / 1000 Hz
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment using x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode

Handheld Tachometer PCE-LES 308

US$ 1,176.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Handheld Tachometer. The Handheld Tachometer is equipped with 8 high-power LEDs, which together generate a light intensity of 17670 lux at 20 cm / 1000 Hz.
The Handheld Tachometer allows you to set the flash frequency in both FPM and Hz. The Handheld Tachometer is pocket sized, small and also mains-independent thanks to the rechargeable battery.

bright 8 high power LEDs
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
9150 lux at 30 cm / 1000 Hz
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment using x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode

Rotation Meter PCE-LES 308

US$ 1,176.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Rotation Meter. The Rotation Meter is equipped with 8 high-power LEDs, which together generate a light intensity of 17670 lux at 20 cm / 1000 Hz.
The Rotation Meter allows you to set the flash frequency in both FPM and Hz. The Rotation Meter is pocket sized, small and also mains-independent thanks to the rechargeable battery.

bright 8 high power LEDs
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
9150 lux at 30 cm / 1000 Hz
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment using x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode

Stroboscope / Stroboscope Light PCE-LES 308

US$ 1,176.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Stroboscope / Stroboscope Light. The Stroboscope / Stroboscope Light is equipped with 8 high-power LEDs, which together generate a light intensity of 17670 lux at 20 cm / 1000 Hz.
The Stroboscope / Stroboscope Light allows you to set the flash frequency in both FPM and Hz. The Stroboscope / Stroboscope Light is pocket sized, small and also mains-independent thanks to the rechargeable battery.

bright 8 high power LEDs
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
9150 lux at 30 cm / 1000 Hz
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment using x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode

Tachometer PCE-LES 308

US$ 1,176.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Tachometer. The Tachometer is equipped with 8 high-power LEDs, which together generate a light intensity of 17670 lux at 20 cm / 1000 Hz.
The Tachometer allows you to set the flash frequency in both FPM and Hz. The Tachometer is pocket sized, small and also mains-independent thanks to the rechargeable battery.

bright 8 high power LEDs
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
9150 lux at 30 cm / 1000 Hz
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment using x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode