Query results | PCE Instruments

Ash Content Analyzer / Incinerator PCE-UX 052

US$ 1,182.00

ex. VAT, ex. delivery costs

The Ash Content Analyzer / Incinerator is a cost-effective and powerful alternative to conventional high-temperature furnaces. Developed for the incineration of individual samples up to a maximum temperature of 610 °C, this device is ideal for determining the ash content, the incineration residue and for treating all organic and inorganic materials.

radiator power: 375 W
temperature range up to approx. 610 °C
sample volume: max. 130 cm³
max. pan size: ⌀75 mm x 30 mm height
operating voltage: 230 V

Fast incinerator / Rapid incinerator PCE-UX 052

US$ 1,182.00

ex. VAT, ex. delivery costs

The Fast incinerator / Rapid incinerator is a cost-effective and powerful alternative to conventional high-temperature furnaces. Developed for the incineration of individual samples up to a maximum temperature of 610 °C, this device is ideal for determining the ash content, the incineration residue and for treating all organic and inorganic materials.

radiator power: 375 W
temperature range up to approx. 610 °C
sample volume: max. 130 cm³
max. pan size: ⌀75 mm x 30 mm height
operating voltage: 230 V

Heating Mantle PCE-UX 052

US$ 1,182.00

ex. VAT, ex. delivery costs

The Heating Mantle is a cost-effective and powerful alternative to conventional high-temperature furnaces. Developed for the incineration of individual samples up to a maximum temperature of 610 °C, this device is ideal for determining the ash content, the incineration residue and for treating all organic and inorganic materials. This infrared Heating Mantle is used in conjunction with moisture analysers, for example, to determine the incineration residue or ash content by annealing or incinerating the dry substance after the determination of dry matter, e.g. in sewage treatment plants, in the chemical or paper industry and many other areas.

radiator power: 375 W
temperature range up to approx. 610 °C
sample volume: max. 130 cm³
max. pan size: ⌀75 mm x 30 mm height
operating voltage: 230 V

Analytical Balance PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,181.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this analytical balance is ideally suited for checking small samples for their weight. For example, powder can be weighed with the analytical balance. Typical areas of application for the analytical balance are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Benchtop Scale PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,181.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this benchtop scale is ideally suited for checking small samples for their weight. For example, powder can be weighed with the benchtop scale. Typical areas of application for the benchtop scale are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Checkweighing Scale PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,181.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this checkweighing scale is ideally suited for checking small samples for their weight. For example, powder can be weighed with the checkweighing scale. Typical areas of application for the checkweighing scale are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Counting Scales PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,181.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, these counting scales are ideally suited for checking small samples for their weight. For example, powder can be weighed with these counting scales. Typical areas of application for the counting scales are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Industrial Scale PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,181.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this industrial scale is ideally suited for checking small samples for their weight. For example, powder can be weighed with the industrial scale. Typical areas of application for the industrial scale are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Inventory Scale PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,181.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this inventory scale is ideally suited for checking small samples for their weight. For example, powder can be weighed with the inventory scale. Typical areas of application for the inventory scale are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

LAB Scale PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,181.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this LAB scale is ideally suited for checking small samples for their weight. For example, powder can be weighed with the LAB scale. Typical areas of application for the laboratory scale are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Laboratory Balance PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,181.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this laboratory balance is ideally suited for checking small samples for their weight. For example, powder can be weighed with the laboratory balance. Typical areas of application for the laboratory balance are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Precision Balance PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,181.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this precision balance is ideally suited for checking small samples for their weight. For example, powder can be weighed with the precision balance. Typical areas of application for the precision balance are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Tabletop Scale PCE-ABT 220L-DAkkS incl. DAkkS Calibration Certificate

US$ 1,181.00

ex. VAT, ex. delivery costs

With a resolution of 0.1 mg, this tabletop scale is ideally suited for checking small samples for their weight. For example, powder can be weighed with the tabletop scale. Typical areas of application for the tabletop scale are therefore in laboratories or in research facilities.

Measuring range: 0 … 220 g
Resolution: 0.1 mg
Measurement accuracy: ±0.5 mg
Windbreak
RS232 data interface
incl. DAkkS Calibration Certificate

Automotive Tester PCE-LES 308

US$ 1,176.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Automotive Tester. The Automotive Tester is equipped with 8 high-power LEDs, which together generate a light intensity of 17670 lux at 20 cm / 1000 Hz.
The Automotive Tester allows you to set the flash frequency in both FPM and Hz. The Automotive Tester is pocket sized, small and also mains-independent thanks to the rechargeable battery.

bright 8 high power LEDs
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
9150 lux at 30 cm / 1000 Hz
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment using x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode

Car Measuring Device PCE-LES 308

US$ 1,176.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Car Measuring Device. The Car Measuring Device is equipped with 8 high-power LEDs, which together generate a light intensity of 17670 lux at 20 cm / 1000 Hz.
The Car Measuring Device allows you to set the flash frequency in both FPM and Hz. The Car Measuring Device is pocket sized, small and also mains-independent thanks to the rechargeable battery.

bright 8 high power LEDs
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
9150 lux at 30 cm / 1000 Hz
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment using x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode

Condition Monitoring Stroboscope PCE-LES 308

US$ 1,176.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Condition Monitoring Stroboscope. The Condition Monitoring Stroboscope is equipped with 8 high-power LEDs, which together generate a light intensity of 17670 lux at 20 cm / 1000 Hz.
The Condition Monitoring Stroboscope allows you to set the flash frequency in both FPM and Hz. The Condition Monitoring Stroboscope is pocket sized, small and also mains-independent thanks to the rechargeable battery.

bright 8 high power LEDs
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
9150 lux at 30 cm / 1000 Hz
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment using x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode

Handheld Tachometer PCE-LES 308

US$ 1,176.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Handheld Tachometer. The Handheld Tachometer is equipped with 8 high-power LEDs, which together generate a light intensity of 17670 lux at 20 cm / 1000 Hz.
The Handheld Tachometer allows you to set the flash frequency in both FPM and Hz. The Handheld Tachometer is pocket sized, small and also mains-independent thanks to the rechargeable battery.

bright 8 high power LEDs
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
9150 lux at 30 cm / 1000 Hz
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment using x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode

Rotation Meter PCE-LES 308

US$ 1,176.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Rotation Meter. The Rotation Meter is equipped with 8 high-power LEDs, which together generate a light intensity of 17670 lux at 20 cm / 1000 Hz.
The Rotation Meter allows you to set the flash frequency in both FPM and Hz. The Rotation Meter is pocket sized, small and also mains-independent thanks to the rechargeable battery.

bright 8 high power LEDs
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
9150 lux at 30 cm / 1000 Hz
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment using x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode

Stroboscope / Stroboscope Light PCE-LES 308

US$ 1,176.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Stroboscope / Stroboscope Light. The Stroboscope / Stroboscope Light is equipped with 8 high-power LEDs, which together generate a light intensity of 17670 lux at 20 cm / 1000 Hz.
The Stroboscope / Stroboscope Light allows you to set the flash frequency in both FPM and Hz. The Stroboscope / Stroboscope Light is pocket sized, small and also mains-independent thanks to the rechargeable battery.

bright 8 high power LEDs
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
9150 lux at 30 cm / 1000 Hz
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment using x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode

Tachometer PCE-LES 308

US$ 1,176.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Tachometer. The Tachometer is equipped with 8 high-power LEDs, which together generate a light intensity of 17670 lux at 20 cm / 1000 Hz.
The Tachometer allows you to set the flash frequency in both FPM and Hz. The Tachometer is pocket sized, small and also mains-independent thanks to the rechargeable battery.

bright 8 high power LEDs
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
9150 lux at 30 cm / 1000 Hz
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment using x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode

Automotive Tester LM-TC-DUAL

US$ 1,175.00

ex. VAT, ex. delivery costs

The Automotive Tester has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Automotive Tester with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

Measuring range: 2 ... 5000 µm
Accuracy: 1 µm
FE / nFE metals
Wireless interface for Windows, iOS and Android
OLED display
Swiveling probe
IP54 housing

Car Measuring Device LM-TC-DUAL

US$ 1,175.00

ex. VAT, ex. delivery costs

The Car Measuring Device has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Car Measuring Device with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

Measuring range: 2 ... 5000 µm
Accuracy: 1 µm
FE / nFE metals
Wireless interface for Windows, iOS and Android
OLED display
Swiveling probe
IP54 housing

Coating Thickness Gauge LM-TC-DUAL

US$ 1,175.00

ex. VAT, ex. delivery costs

The Coating Thickness Gauge has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Coating Thickness Gauge with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

Measuring range: 2 ... 5000 µm
Accuracy: 1 µm
FE / nFE metals
Wireless interface for Windows, iOS and Android
OLED display
Swiveling probe
IP54 housing

Material Tester LM-TC-DUAL

US$ 1,175.00

ex. VAT, ex. delivery costs

The Material Tester has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Material Tester with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

Measuring range: 2 ... 5000 µm
Accuracy: 1 µm
FE / nFE metals
Wireless interface for Windows, iOS and Android
OLED display
Swiveling probe
IP54 housing

Material Thickness Meter LM-TC-DUAL

US$ 1,175.00

ex. VAT, ex. delivery costs

The Material Thickness Meter has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Material Thickness Meter with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

Measuring range: 2 ... 5000 µm
Accuracy: 1 µm
FE / nFE metals
Wireless interface for Windows, iOS and Android
OLED display
Swiveling probe
IP54 housing

Paint Gauge / Paint Tester LM-TC-DUAL

US$ 1,175.00

ex. VAT, ex. delivery costs

The Paint Gauge / Paint Tester has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Paint Gauge / Paint Tester with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

Measuring range: 2 ... 5000 µm
Accuracy: 1 µm
FE / nFE metals
Wireless interface for Windows, iOS and Android
OLED display
Swiveling probe
IP54 housing

Paint Test Equipment / Paint Testing Equipment LM-TC-DUAL

US$ 1,175.00

ex. VAT, ex. delivery costs

The Paint Test Equipment / Paint Testing Equipment has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Paint Test Equipment / Paint Testing Equipment with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

Measuring range: 2 ... 5000 µm
Accuracy: 1 µm
FE / nFE metals
Wireless interface for Windows, iOS and Android
OLED display
Swiveling probe
IP54 housing

Surface Testing LM-TC-DUAL

US$ 1,175.00

ex. VAT, ex. delivery costs

The Surface Testing has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Surface Testing with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

Measuring range: 2 ... 5000 µm
Accuracy: 1 µm
FE / nFE metals
Wireless interface for Windows, iOS and Android
OLED display
Swiveling probe
IP54 housing

Thickness Gauge LM-TC-DUAL

US$ 1,175.00

ex. VAT, ex. delivery costs

The Thickness Gauge has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Thickness Gauge with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

Measuring range: 2 ... 5000 µm
Accuracy: 1 µm
FE / nFE metals
Wireless interface for Windows, iOS and Android
OLED display
Swiveling probe
IP54 housing

Thickness Meter LM-TC-DUAL

US$ 1,175.00

ex. VAT, ex. delivery costs

The Thickness Meter has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Thickness Meter with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

Measuring range: 2 ... 5000 µm
Accuracy: 1 µm
FE / nFE metals
Wireless interface for Windows, iOS and Android
OLED display
Swiveling probe
IP54 housing

Automotive Tester PCE-CT 80-FN3

US$ 1,172.00

ex. VAT, ex. delivery costs

The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Car Measuring Device PCE-CT 80-FN3

US$ 1,172.00

ex. VAT, ex. delivery costs

The car measuring device is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the car measuring device, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Coating Thickness Gauge PCE-CT 80-FN3

US$ 1,172.00

ex. VAT, ex. delivery costs

The coating thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the coating thickness gauge, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Material Tester PCE-CT 80-FN3

US$ 1,172.00

ex. VAT, ex. delivery costs

The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Material Thickness Meter PCE-CT 80-FN3

US$ 1,172.00

ex. VAT, ex. delivery costs

The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"

Paint Gauge PCE-CT 80-FN3

US$ 1,172.00

ex. VAT, ex. delivery costs

The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
Accuracy after foil calibration: ±(2% of reading + 1 µm)
For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
Diameter: 17mm / 0.67"