Query results | PCE Instruments

Air Flow Meter KWG1

US$ 117.00

ex. VAT, ex. delivery costs

Additional small air flow meter KWG 1 for PCE-Wind logger. Cup anemometer with impulse output.

Output: 0… 100 Hz
Measurement reading range: 0.9 … 40 m/s
Accuracy: ± 0.5 m/s or 5 % v. M

Temperature Controller PCE-RE72

US$ 117.00

ex. VAT, ex. delivery costs

The process controller / temperature controller is a compact PID controller which can be used in a wide range of applications. On the input side, this temperature controller processes the widely used process signals 4 … 20 mA and 0 … 10 V as well as resistance sensors and thermocouples. The temperature controller can be used very flexibly, since different operating modes are available. Besides the simple on / off control with adjustable hysteresis, the digital controller also offers various combinations of the PID control. Thanks to the SMART PID control, this temperature controller achieves the setpoint value very quickly and with a slight overshoot.

Two 4-digit LED displays
Two output relays
Front protected to IP65
Analogue universal input

Power Indicator PCE-N24S

US$ 115.00

ex. VAT, ex. delivery costs

The power indicator is used for the signal processing of 4 .. 20 mA. The power indicator has a 5-digit LED display to allow the user to read the directly measured current values.

Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
Display: 4 digits, red
Digit height: 20 mm

Analogue Indicator PCE-PA39

US$ 114.00

ex. VAT, ex. delivery costs

The analogue indicator is designed to monitor AC power. This analogue indicator can be installed onto switch panels. The analogue indicator is a moving-coil ammeter. Active power as well as apparent power can be measured by means of this analogue indicator.

Moving-coil meter to measure electric power
96 x 96 mm
Panel installation

Force Gauge / Digital Force Gauge PCE-TWT 30N

US$ 113.00

ex. VAT, ex. delivery costs

The Force Gauge / Digital Force Gauge is a compact, portable precision tool for applications where exact torque values are crucial. It has an easy-to-read display with backlighting that provides clear values even in poor lighting conditions. Our Force Gauge / Digital Force Gauges are primarily used in vehicle construction, mechanical engineering, bicycle assembly and in the electrical and electronics industries.

Torque: 0.01 ... 30 Nm
Resolution: 0.01 Nm
Accuracy: ±2% FS / ±2.5% FS
Units: Nm, kgf cm, lbf ft, lbf in
Internal memory: 999 values
Adjustable alarm

Material Tester PCE-TWT 30N

US$ 113.00

ex. VAT, ex. delivery costs

The Material Tester is a compact, portable precision tool for applications where exact torque values are crucial. It has an easy-to-read display with backlighting that provides clear values even in poor lighting conditions. Our Material Testers are primarily used in vehicle construction, mechanical engineering, bicycle assembly and in the electrical and electronics industries.

Torque: 0.01 ... 30 Nm
Resolution: 0.01 Nm
Accuracy: ±2% FS / ±2.5% FS
Units: Nm, kgf cm, lbf ft, lbf in
Internal memory: 999 values
Adjustable alarm

Torque Meter / Torque Tester PCE-TWT 30N

US$ 113.00

ex. VAT, ex. delivery costs

The Torque Meter / Torque Tester is a compact, portable precision tool for applications where exact torque values are crucial. It has an easy-to-read display with backlighting that provides clear values even in poor lighting conditions. Our Torque Meter / Torque Testers are primarily used in vehicle construction, mechanical engineering, bicycle assembly and in the electrical and electronics industries.

Torque: 0.01 ... 30 Nm
Resolution: 0.01 Nm
Accuracy: ±2% FS / ±2.5% FS
Units: Nm, kgf cm, lbf ft, lbf in
Internal memory: 999 values
Adjustable alarm

Torque Wrench PCE-TWT 30N

US$ 113.00

ex. VAT, ex. delivery costs

The Torque Wrench is a compact, portable precision tool for applications where exact torque values are crucial. It has an easy-to-read display with backlighting that provides clear values even in poor lighting conditions. Our Torque Wrench are primarily used in vehicle construction, mechanical engineering, bicycle assembly and in the electrical and electronics industries.

Torque: 0.01 ... 30 Nm
Resolution: 0.01 Nm
Accuracy: ±2% FS / ±2.5% FS
Units: Nm, kgf cm, lbf ft, lbf in
Internal memory: 999 values
Adjustable alarm

Universal Testing Machine PCE-TWT 30N

US$ 113.00

ex. VAT, ex. delivery costs

The Universal Testing Machine is a compact, portable precision tool for applications where exact torque values are crucial. It has an easy-to-read display with backlighting that provides clear values even in poor lighting conditions. Our Universal Testing Machines are primarily used in vehicle construction, mechanical engineering, bicycle assembly and in the electrical and electronics industries.

Torque: 0.01 ... 30 Nm
Resolution: 0.01 Nm
Accuracy: ±2% FS / ±2.5% FS
Units: Nm, kgf cm, lbf ft, lbf in
Internal memory: 999 values
Adjustable alarm

Climate Meter PCE-FST-100-2006-SMS

US$ 112.00

ex. VAT, ex. delivery costs

The Climate Meter sensor is ideal for monitoring agricultural areas, gardens, green spaces or greenhouses. With the Climate Meter, soil moisture and soil temperature can be precisely recorded in order to optimize irrigation of plants or carry out scientific measurements.

Soil moisture: 0 ... 100%
Resolution: 0.1%
Accuracy: 3% at 0 ... 50% and 5% at 50 ... 100 %
Floor temperature: -30 ... 85°C / -22 ... 185°F
Resolution: 0.1°C / 0.18°F
Accuracy: ±0.5°C / ±0.9°F @25°C / 77°F
Output: RS-485 Modbus RTU
Protection class: IP68

Current Transmitter PCE-P20Z Alternating Current

US$ 112.00

ex. VAT, ex. delivery costs

The PCE-P20Z transmitter is used to convert a measured current into a standard signal. This makes it possible to determine the most diverse currents with the transmitter.

Input: Alternating current
Various supply voltages
For direct or indirect current measurement
Current transformer can be connected
With voltage output or current output

Note: This item must be configured before ordering!

Environmental Meter PCE-FST-100-2006-SMS

US$ 112.00

ex. VAT, ex. delivery costs

The Environmental Meter sensor is ideal for monitoring agricultural areas, gardens, green spaces or greenhouses. With the Environmental Meter, soil moisture and soil temperature can be precisely recorded in order to optimize irrigation of plants or carry out scientific measurements.

Soil moisture: 0 ... 100%
Resolution: 0.1%
Accuracy: 3% at 0 ... 50% and 5% at 50 ... 100 %
Floor temperature: -30 ... 85°C / -22 ... 185°F
Resolution: 0.1°C / 0.18°F
Accuracy: ±0.5°C / ±0.9°F @25°C / 77°F
Output: RS-485 Modbus RTU
Protection class: IP68

Environmental Meter PCE-PH 18

US$ 112.00

ex. VAT, ex. delivery costs

The environmental meter PCE-PH 18 is a environmental meter with a pointed glass electrode. Thanks to this glass electrode, the environmental meter PCE-PH 18 in, for example potting soil, sludge or in viscous liquids, such as in a lye, the pH can be determined.

Measuring range: 0.00 … 14.00 pH
Accuracy: ± 0.1 pH (at 20°C / 68°F), ± 0.2 pH
Resolution: 0.01 pH
Puncture electrode (soft bottoms)
Exchangeable electrode through BNC connection

Environmental Tester PCE-FST-100-2006-SMS

US$ 112.00

ex. VAT, ex. delivery costs

The Environmental Tester sensor is ideal for monitoring agricultural areas, gardens, green spaces or greenhouses. With the Environmental Tester, soil moisture and soil temperature can be precisely recorded in order to optimize irrigation of plants or carry out scientific measurements.

Soil moisture: 0 ... 100%
Resolution: 0.1%
Accuracy: 3% at 0 ... 50% and 5% at 50 ... 100 %
Floor temperature: -30 ... 85°C / -22 ... 185°F
Resolution: 0.1°C / 0.18°F
Accuracy: ±0.5°C / ±0.9°F @25°C / 77°F
Output: RS-485 Modbus RTU
Protection class: IP68

Environmental Tester PCE-PH 18

US$ 112.00

ex. VAT, ex. delivery costs

The environmental tester PCE-PH 18 is a environmental tester with a pointed glass electrode. Thanks to this glass electrode, the environmental tester PCE-PH 18 in, for example potting soil, sludge or in viscous liquids, such as in a lye, the pH can be determined.

Measuring range: 0.00 … 14.00 pH
Accuracy: ± 0.1 pH (at 20°C / 68°F), ± 0.2 pH
Resolution: 0.01 pH
Puncture electrode (soft bottoms)
Exchangeable electrode through BNC connection

$Handheld Refractometer PCE-0100 Salinity$

Handheld Refractometer PCE-0100 Salinity

US$ 112.00

ex. VAT, ex. delivery costs

PCE-0100 is a handheld refractometer used to determine the salt content or % salinity ppt and salinity SG (specific gravity) of salt water, sea water and other solutions containing a concentration of salt. This portable pocket salinity refractometer has a double scale to allow the user to view both measurement parameters at once.

Measurement range:
0 … 100% salinity ppt, 1.000 … 1.070 salinity SG

Resolution: 1 % or 0.001
Accuracy: ±0.1 %

Humidity Sensor PCE-FST-100-2006-SMS

US$ 112.00

ex. VAT, ex. delivery costs

The Humidity Sensor sensor is ideal for monitoring agricultural areas, gardens, green spaces or greenhouses. With the Humidity Sensor, soil moisture and soil temperature can be precisely recorded in order to optimize irrigation of plants or carry out scientific measurements.

Soil moisture: 0 ... 100%
Resolution: 0.1%
Accuracy: 3% at 0 ... 50% and 5% at 50 ... 100 %
Floor temperature: -30 ... 85°C / -22 ... 185°F
Resolution: 0.1°C / 0.18°F
Accuracy: ±0.5°C / ±0.9°F @25°C / 77°F
Output: RS-485 Modbus RTU
Protection class: IP68

Moisture Sensor PCE-FST-100-2006-SMS

US$ 112.00

ex. VAT, ex. delivery costs

The Moisture Sensor sensor is ideal for monitoring agricultural areas, gardens, green spaces or greenhouses. With the Moisture Sensor, soil moisture and soil temperature can be precisely recorded in order to optimize irrigation of plants or carry out scientific measurements.

Soil moisture: 0 ... 100%
Resolution: 0.1%
Accuracy: 3% at 0 ... 50% and 5% at 50 ... 100 %
Floor temperature: -30 ... 85°C / -22 ... 185°F
Resolution: 0.1°C / 0.18°F
Accuracy: ±0.5°C / ±0.9°F @25°C / 77°F
Output: RS-485 Modbus RTU
Protection class: IP68

pH Meter PCE-PH 18

US$ 112.00

ex. VAT, ex. delivery costs

The pH meter PCE-PH 18 is a pH meter with a pointed glass electrode. Thanks to this glass electrode, the pH meter PCE-PH 18 in, for example potting soil, sludge or in viscous liquids, such as in a lye, the pH can be determined.

Measuring range: 0.00 … 14.00 pH
Accuracy: ± 0.1 pH (at 20°C / 68°F), ± 0.2 pH
Resolution: 0.01 pH
Puncture electrode (soft bottoms)
Exchangeable electrode through BNC connection

Salt Meter PCE-0100 Salinity

US$ 112.00

ex. VAT, ex. delivery costs

PCE-0100 is a Salt Meter used to determine the salt content or % salinity ppt and salinity SG (specific gravity) of salt water, sea water and other solutions containing a concentration of salt. This portable pocket salinity refractometer has a double scale to allow the user to view both measurement parameters at once.

Measurement range:
0 … 100% salinity ppt, 1.000 … 1.070 salinity SG

Resolution: 1 % or 0.001
Accuracy: ±0.1 %

Temperature Sensor PCE-FST-100-2006-SMS

US$ 112.00

ex. VAT, ex. delivery costs

The Temperature Sensor sensor is ideal for monitoring agricultural areas, gardens, green spaces or greenhouses. With the Temperature Sensor, soil moisture and soil temperature can be precisely recorded in order to optimize irrigation of plants or carry out scientific measurements.

Soil moisture: 0 ... 100%
Resolution: 0.1%
Accuracy: 3% at 0 ... 50% and 5% at 50 ... 100 %
Floor temperature: -30 ... 85°C / -22 ... 185°F
Resolution: 0.1°C / 0.18°F
Accuracy: ±0.5°C / ±0.9°F @25°C / 77°F
Output: RS-485 Modbus RTU
Protection class: IP68

Temperature Sensor PCE-FST-100-2006-SMS

US$ 112.00

ex. VAT, ex. delivery costs

Soil moisture: 0 ... 100%
Resolution: 0.1%
Accuracy: 3% at 0 ... 50% and 5% at 50 ... 100 %
Floor temperature: -30 ... 85°C / -22 ... 185°F
Resolution: 0.1°C / 0.18°F
Accuracy: ±0.5°C / ±0.9°F @25°C / 77°F
Output: RS-485 Modbus RTU
Protection class: IP68

Voltage Transmitter PCE-P20Z AC Voltage

US$ 112.00

ex. VAT, ex. delivery costs

The PCE-P20Z measuring transducer measures voltages up to 600 V AC and converts this into a standard signal. Depending on the design, the PCE-P20U-I transducer can measure voltages up to 250 V AC, 400 V AC or 600 V AC and outputs a 4 … 20 mA standard signal. Depending on the model, the supply voltage of the transducers is either 85 … 253 V AC / DC or 20 … 40 V AC / DC.

RMS Measurement of voltages up to 600 V AC
Input: AC voltage
Output: 4 … 20 mA or 0 … 10 V Standard signal
Various supply voltages

Note: This item must be configured before ordering!

$Water Analysis Meter PCE-0100 Salinity Refractometer$

Water Analysis Meter PCE-0100 Salinity Refractometer

US$ 112.00

ex. VAT, ex. delivery costs

Measurement range: 0 … 100% salinity ppt, 1.000 … 1.070 salinity SG
Resolution: 1 % or 0.001
Accuracy: ±0.1 %

Water Analysis Meter PCE-PH 18

US$ 112.00

ex. VAT, ex. delivery costs

The water analysis meter PCE-PH 18 is a water analysis meter with a pointed glass electrode. Thanks to this glass electrode, the water analysis meter PCE-PH 18 in, for example potting soil, sludge or in viscous liquids, such as in a lye, the pH can be determined.

Measuring range: 0.00 … 14.00 pH
Accuracy: ± 0.1 pH (at 20°C / 68°F), ± 0.2 pH
Resolution: 0.01 pH
Puncture electrode (soft bottoms)
Exchangeable electrode through BNC connection

Voltage Indicator PCE-N24H

US$ 111.00

ex. VAT, ex. delivery costs

The digital voltage indicator is is used to show DC voltage parameters. The voltage indicator can measure and display direct current, direct voltage. The possibility of freely scaling the input signal allows a very versatile use of this voltage indicator.

Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: ±100 V DC, ±250 V DC, ± 400 V DC, 1 A DC, 5 A DC (selectable)
Display: 4 digits, red
Digit height: 20 mm / 0.78"Note: This item must be configured before ordering!

Air Humidity Meter PCE-HT 72

US$ 111.00

ex. VAT, ex. delivery costs

The air humidity meter is a data logger for temperature and humidity. A memory of 20,010 sets of measurements allows the air humidity meter to use up to several months. The air humidity meter is particularly suitable for measuring tasks where it is not possible for the user to install a software for reading the measured values.

Measuring range Temp.: -30 … 60°C / -22 … 140°F
Measuring range rel. Humidity: 0 … 100% rh
Measurement protocol as PDF
Data export possible as CSV
Readable without software
20,010 sets of measured values can be stored

Climate Meter PCE-HT 72

US$ 111.00

ex. VAT, ex. delivery costs

The climate meter PCE-HT 72 is a data logger for temperature and humidity. A memory of 20,010 sets of measurements allows the climate meter PCE-HT 72 to use up to several months. The PCE-HT 72 climate meter is particularly suitable for measuring tasks where it is not possible for the user to install a software for reading the measured values.

Measuring range Temp.: -30 … 60°C / -22 … 140°F
Measuring range rel. Humidity: 0 … 100% rh
Measurement protocol as PDF
Data export possible as CSV
Readable without software
20,010 sets of measured values can be stored

Data Logger for Temperature and Humidity PCE-HT 72

US$ 111.00

ex. VAT, ex. delivery costs

The data logger for temperature and humidity has a memory of 20,010 sets of measurements, allowing use for up to several months. The data logger for temperature and humidity is particularly suitable for measuring tasks where it is not possible for the user to install a software for reading the measured values.

Measuring range Temp.: -30 … 60°C / -22 … 140°F
Measuring range rel. Humidity: 0 … 100% rh
Measurement protocol as PDF
Data export possible as CSV
Readable without software
20,010 sets of measured values can be stored

Data Logger with USB Interface PCE-HT 72

US$ 111.00

ex. VAT, ex. delivery costs

The data logger with USB interface is a data logger for temperature and humidity. A memory of 20,010 sets of measurements allows the data logger with USB interface to be used up to several months. The data logger with USB interface is particularly suitable for measuring tasks where it is not possible for the user to install a software for reading the measured values.

Measuring range Temp.: -30 … 60°C / -22 … 140°F
Measuring range rel. Humidity: 0 … 100% rh
Measurement protocol as PDF
Data export possible as CSV
Readable without software
20,010 sets of measured values can be stored

Environmental Meter PCE-HT 72

US$ 111.00

ex. VAT, ex. delivery costs

The environmental meter PCE-HT 72 is a data logger for temperature and humidity. A memory of 20,010 sets of measurements allows the environmental meter PCE-HT 72 to use up to several months. The PCE-HT 72 environmental meter is particularly suitable for measuring tasks where it is not possible for the user to install a software for reading the measured values.

Measuring range Temp.: -30 … 60°C / -22 … 140°F
Measuring range rel. Humidity: 0 … 100% rh
Measurement protocol as PDF
Data export possible as CSV
Readable without software
20,010 sets of measured values can be stored

Environmental Tester PCE-HT 72

US$ 111.00

ex. VAT, ex. delivery costs

The environmental tester PCE-HT 72 is a data logger for temperature and humidity. A memory of 20,010 sets of measurements allows the environmental tester PCE-HT 72 to use up to several months. The PCE-HT 72 environmental tester is particularly suitable for measuring tasks where it is not possible for the user to install a software for reading the measured values.

Measuring range Temp.: -30 … 60°C / -22 … 140°F
Measuring range rel. Humidity: 0 … 100% rh
Measurement protocol as PDF
Data export possible as CSV
Readable without software
20,010 sets of measured values can be stored

Food Thermometer PCE-HT 72

US$ 111.00

ex. VAT, ex. delivery costs

The Food Thermometer PCE-HT 72 is a data logger for temperature and humidity. A memory of 20,010 sets of measurements allows the Food Thermometer PCE-HT 72 to use up to several months. The PCE-HT 72 Food Thermometer is particularly suitable for measuring tasks where it is not possible for the user to install a software for reading the measured values.

Measuring range Temp.: -30 … 60°C / -22 … 140°F
Measuring range rel. Humidity: 0 … 100% rh
Measurement protocol as PDF
Data export possible as CSV
Readable without software
20,010 sets of measured values can be stored

Humidity Detector PCE-HT 72

US$ 111.00

ex. VAT, ex. delivery costs

The humidity detector PCE-HT 72 is a data logger for temperature and humidity. A memory of 20,010 sets of measurements allows the humidity detector PCE-HT 72 to use up to several months. The PCE-HT 72 humidity detector is particularly suitable for measuring tasks where it is not possible for the user to install a software for reading the measured values.

Measuring range Temp.: -30 … 60°C / -22 … 140°F
Measuring range rel. Humidity: 0 … 100% rh
Measurement protocol as PDF
Data export possible as CSV
Readable without software
20,010 sets of measured values can be stored

HVAC Meter PCE-HT 72

US$ 111.00

ex. VAT, ex. delivery costs

The HVAC meter PCE-HT 72 is a data logger for temperature and humidity. A memory of 20,010 sets of measurements allows the HVAC meter PCE-HT 72 to use up to several months. The PCE-HT 72 HVAC meter is particularly suitable for measuring tasks where it is not possible for the user to install a software for reading the measured values.

Measuring range Temp.: -30 … 60°C / -22 … 140°F
Measuring range rel. Humidity: 0 … 100% rh
Measurement protocol as PDF
Data export possible as CSV
Readable without software
20,010 sets of measured values can be stored

Hygrometer PCE-HT 72

US$ 111.00

ex. VAT, ex. delivery costs

The hygrometer PCE-HT 72 is a data logger for temperature and humidity. A memory of 20,010 sets of measurements allows the hygrometer PCE-HT 72 to use up to several months. The PCE-HT 72 hygrometer is particularly suitable for measuring tasks where it is not possible for the user to install a software for reading the measured values.

Measuring range Temp.: -30 … 60°C / -22 … 140°F
Measuring range rel. Humidity: 0 … 100% rh
Measurement protocol as PDF
Data export possible as CSV
Readable without software
20,010 sets of measured values can be stored