• direct voltage: 0.1 mV ... 1000 V
• alternating voltage: 0.1 mV ... 750 V
• direct current: 0.1 A ... 1000 A
• alternating current: 0.1 ... 1000 A
• resistance: 0.1 Ω ... 60 MΩ
• capacitance: 1 nF ... 100 mF
• frequency: 0 Hz ... 10 MHz
• temperature sensor: -20 ... +1000 °C
• non-contact voltage detection (NCV)
• automatic and manual measurement range selection

• direct voltage: 0.1 mV ... 1000 V
• alternating voltage: 0.1 mV ... 750 V
• direct current: 0.1 A ... 1000 A
• alternating current: 0.1 ... 1000 A
• resistance: 0.1 Ω ... 60 MΩ
• capacitance: 1 nF ... 100 mF
• frequency: 0 Hz ... 10 MHz
• temperature sensor: -20 ... +1000 °C
• non-contact voltage detection (NCV)
• automatic and manual measurement range selection

• direct voltage: 0.1 mV ... 1000 V
• alternating voltage: 0.1 mV ... 750 V
• direct current: 0.1 A ... 1000 A
• alternating current: 0.1 ... 1000 A
• resistance: 0.1 Ω ... 60 MΩ
• capacitance: 1 nF ... 100 mF
• frequency: 0 Hz ... 10 MHz
• temperature sensor: -20 ... +1000 °C
• non-contact voltage detection (NCV)
• automatic and manual measurement range selection

• direct voltage: 0.1 mV ... 1000 V
• alternating voltage: 0.1 mV ... 750 V
• direct current: 0.1 A ... 1000 A
• alternating current: 0.1 ... 1000 A
• resistance: 0.1 Ω ... 60 MΩ
• capacitance: 1 nF ... 100 mF
• frequency: 0 Hz ... 10 MHz
• temperature sensor: -20 ... +1000 °C
• non-contact voltage detection (NCV)
• automatic and manual measurement range selection

• direct voltage: 0.1 mV ... 1000 V
• alternating voltage: 0.1 mV ... 750 V
• direct current: 0.1 A ... 1000 A
• alternating current: 0.1 ... 1000 A
• resistance: 0.1 Ω ... 60 MΩ
• capacitance: 1 nF ... 100 mF
• frequency: 0 Hz ... 10 MHz
• temperature sensor: -20 ... +1000 °C
• non-contact voltage detection (NCV)
• automatic and manual measurement range selection

• direct voltage: 0.1 mV ... 1000 V
• alternating voltage: 0.1 mV ... 750 V
• direct current: 0.1 A ... 1000 A
• alternating current: 0.1 ... 1000 A
• resistance: 0.1 Ω ... 60 MΩ
• capacitance: 1 nF ... 100 mF
• frequency: 0 Hz ... 10 MHz
• temperature sensor: -20 ... +1000 °C
• non-contact voltage detection (NCV)
• automatic and manual measurement range selection

• measurement range: 0.01 ... 5 %
• resolution: 0.01 %
• accuracy: ± 0.05 % FS (< 2 %), ± 0.1 % FS (2 % ... 5 %)
• automatic temperature compensation
• quick and accurate measurement in approx. 1 s

PCE-0100 is a handheld refractometer used to determine the salt content or % salinity ppt and salinity SG (specific gravity) of salt water, sea water and other solutions containing a concentration of salt. This portable pocket salinity refractometer has a double scale to allow the user to view both measurement parameters at once.

Measurement range:
  0 … 100% salinity ppt, 1.000 … 1.070 salinity SG

• Resolution: 1 % or 0.001
• Accuracy: ±0.1 %

PCE-0100 is a Salt Meter used to determine the salt content or % salinity ppt and salinity SG (specific gravity) of salt water, sea water and other solutions containing a concentration of salt. This portable pocket salinity refractometer has a double scale to allow the user to view both measurement parameters at once.

Measurement range:
  0 … 100% salinity ppt, 1.000 … 1.070 salinity SG

• Resolution: 1 % or 0.001
• Accuracy: ±0.1 %

• measurement range: 0.01 ... 5 %
• resolution: 0.01 %
• accuracy: ± 0.05 % FS (< 2 %), ± 0.1 % FS (2 % ... 5 %)
• automatic temperature compensation
• quick and accurate measurement in approx. 1 s

PCE-0100 is a handheld refractometer used to determine the salt content or % salinity ppt and salinity SG (specific gravity) of salt water, sea water and other solutions containing a concentration of salt. This portable pocket salinity refractometer has a double scale to allow the user to view both measurement parameters at once.

• Measurement range: 0 … 100% salinity ppt, 1.000 … 1.070 salinity SG
• Resolution: 1 % or 0.001
• Accuracy: ±0.1 %

• Measuring range: 0.00 ... 0.400% BAC
• Resolution: 0.001% BAC
• Accuracy: 0.015% BAC
• Traffic light display for alcohol values with warning signal
• Fast results in approx. 10 s
• Voice output
• Memory for 100 values

• DC voltage: 0 ... 100 V
• resolution: 0.0001 V
• accuracy: ±0.5 %
• resistance: 0 mΩ ... 200 Ω
• resolution: 0.01 mΩ
• accuracy: ±0.5 %
• connections: Kelvin clamps
• adjustable limit values
• internal memory

• DC voltage: 0 ... 100 V
• resolution: 0.0001 V
• accuracy: ±0.5 %
• resistance: 0 mΩ ... 200 Ω
• resolution: 0.01 mΩ
• accuracy: ±0.5 %
• connections: Kelvin clamps
• adjustable limit values
• internal memory

• DC voltage: 0 ... 100 V
• resolution: 0.0001 V
• accuracy: ±0.5 %
• resistance: 0 mΩ ... 200 Ω
• resolution: 0.01 mΩ
• accuracy: ±0.5 %
• connections: Kelvin clamps
• adjustable limit values
• internal memory

• DC voltage: 0 ... 100 V
• resolution: 0.0001 V
• accuracy: ±0.5 %
• resistance: 0 mΩ ... 200 Ω
• resolution: 0.01 mΩ
• accuracy: ±0.5 %
• connections: Kelvin clamps
• adjustable limit values
• internal memory

• DC voltage: 0 ... 100 V
• resolution: 0.0001 V
• accuracy: ±0.5 %
• resistance: 0 mΩ ... 200 Ω
• resolution: 0.01 mΩ
• accuracy: ±0.5 %
• connections: Kelvin clamps
• adjustable limit values
• internal memory

• DC voltage: 0 ... 100 V
• resolution: 0.0001 V
• accuracy: ±0.5 %
• resistance: 0 mΩ ... 200 Ω
• resolution: 0.01 mΩ
• accuracy: ±0.5 %
• connections: Kelvin clamps
• adjustable limit values
• internal memory

Clamp on Tester for measuring AC current, AC voltage, DC current and frequency. The reduced dimensions of this device allow for measurements to be taken in places with limited access. The backlight display ensures that it is easy to read, even in places with limited light available, such as electrical cabinets or in cabling ducts. The Clamp on Tester (as all the test instruments) comes manufacturer calibrated - ISO certification is available as an option.

• AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
• DC current: 200 A / 100-mA / ±2.8% + 8 digits
• AC test voltage (without contact):100 VAC to 600 VAC at 50 /  60 Hz
• Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz / 0.51 to 1 kHz

This Condition Monitoring Phase Rotation Meter has a robust housing with a large LCD display so you can easily and conveniently determine the phase and motor rotation direction. Furthermore, any problems in individual phases, are displayed on the Condition Monitoring Phase Rotation Meter. The Condition Monitoring Phase Rotation Meter meets the safety standard CAT III 600 V, IEC 61010.

• Easy operation
• No batteries required
• Robust alligator clips for easy connection
• 3-phase measurements of 40 … 690 V AC
• Protection class IP 40

The Current Clamp has been designed to detect, indirectly, AC/DC current and frequency. The Current Clamp has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.

• AC current (50/60 Hz): 200 A / 100-mA / ±3.0% + 8 digits
• DC current:200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
• AC test voltage (without contact):100 VAC to 600 VAC 50 /  60 Hz
• Frequency: 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

The Electrical Tester has been designed to detect, indirectly, AC/DC current and frequency. The Electrical Tester has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.

• AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
• DC current: 200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
• AC test voltage (without contact):100 VAC to 600 VAC 50 / 60 Hz
• Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

The HVAC Meter has been designed to detect, indirectly, AC/DC current and frequency. The HVAC Meter has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.

• AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
• DC current: 200 A / 100-mA / ±2.8% + 8 digits
• AC test voltage (without contact): 100 VAC to 600 VAC 50 / 60 Hz
• Frequency: 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

Mini Clamp Meter for measuring AC current, AC voltage, DC current and frequency. The Clamp Meter is designed to indirectly detect AC/DC current and frequency. The Clamp Meter has one white LED which illuminates the point of measurement. Users can test the voltage without contact. The small dimensions of this test instrument allow to take measurements in places with limited access. The Clamp Meter is delivered manufacturer calibrated and can be certified according to ISO.

• AC current(50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8  digits
• DC current: 200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
• AC test voltage (without contact):100 VAC to 600 VAC 50 /  60 Hz
• Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

The Mini Digital Multimeter has been designed to detect, indirectly, AC/DC current and frequency. The Mini Digital Multimeter has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.

• AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
• DC current:200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
• AC test voltage (without contact):100 VAC to 600 VAC 50 / 60 Hz
• Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz