Products for 'Dust Monitor PCE PQC 22EU Incl. Calibration Certificate '

US$ 1,026.00

ex. VAT, ex. delivery costs

The dust monitor is an ideal measuring device for monitoring the air quality at workplaces. The dust monitor is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function

PM2.5
Humidity
Temperature
CO2
Air pressure
Memory: SD card max. 32 GB
Ideal for workplace monitoring
Alarm function

Dust Monitor PCE-MPC 15

US$ 924.00

ex. VAT, ex. delivery costs

The dust monitor is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the dust monitor determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 2.5 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Condition Monitoring Ultrasonic Material Thickness Meter PCE-TG 150A-ICA incl. ISO calibration certificate

US$ 1,020.00

ex. VAT, ex. delivery costs

The Condition Monitoring Ultrasonic Material Thickness Meter can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the Condition Monitoring Ultrasonic Material Thickness Meter.

Measuring range: 1.00 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of Mw. + 0.05 mm
Memory capacity: 1500 measured values

Calibration reference on housing
incl. ISO calibration certificate

Condition Monitoring Stroboscope PCE-LES 303-ICA incl. ISO-Calibration Certificate

US$ 1,025.00

ex. VAT, ex. delivery costs

Analysing the movement of rotating machines is quick and easy with our Condition Monitoring Stroboscope. The Condition Monitoring Stroboscope is equipped with 3 high-power LEDs, which together generate a light intensity of 11730 lux at 20 cm / 1000 Hz.
The Condition Monitoring Stroboscope allows you to set the flash frequency in both FPM and Hz. The Condition Monitoring Stroboscope is pocket size, small and also mains-independent thanks to the rechargeable battery.

3 bright high-power LEDs
flash frequency 60 ... 300000 FPM (flashes per minute)
accuracy: 0.003 %
6160 lux at 30 cm / 1000 Hz
digital pulse width modulation
phase shift - 360 ° ... + 360 °
quick adjustment using x2 and ÷2 key
intuitive control keys and clear display
pocket size
external trigger input and output
route measurement
slow motion mode
incl. ISO-Calibration Certificate

Condition Monitoring PCE-TG 150A F25-ICA incl. ISO-Calibration Certificate

US$ 950.00

ex. VAT, ex. delivery costs

The Condition Monitoring can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to save the corresponding sound velocity in the Condition Monitoring.

Measurement range: 1.20 ... 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of Rd. + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
Probe temperature range: -10 ... 60 °C
Thickness measurement of cast materials
incl. ISO-Calibration Certificate

Dust Measuring Device PCE-AQD 20

US$ 1,026.00

ex. VAT, ex. delivery costs

The dust measuring device is an ideal measuring device for monitoring the air quality at workplaces. The dust measuring device is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function

PM2.5
Humidity
Temperature
CO2
Air pressure
Memory: SD card max. 32 GB
Ideal for workplace monitoring
Alarm function

Dust Measuring Device PCE-MPC 15

US$ 924.00

ex. VAT, ex. delivery costs

The dust measuring device is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the dust measuring device determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 2.5 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Multifunction Calibrator PCE-123-ICA incl. ISO Calibration Certificate

US$ 932.00

ex. VAT, ex. delivery costs

PCE-123 is a multifunction calibrator used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use multifunction calibrator provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the multifunction calibrator useful in a wide range of applications.

DC current: 4 - 20-mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
DC voltage: 0 - 100.00 mV, 0 - 1.000V, 0 - 12.000V
K, J, E, T type thermocouples (°C or °F)
Frequency: 1 - 62,500 Hz
Incl. ISO Calibration Certificate

Condition Monitoring Sound Level Meter PCE-SLT-ICA incl. ISO Calibration Cert.

US$ 866.00

ex. VAT, ex. delivery costs

The Condition Monitoring Sound Level Meter consists of a measuring microphone with handle and a wall bracket with 1.5 m / 4.9 ft cable, a noise transmitter and a digital display. The main field of application of the noise measuring device is the continuous noise measurement and noise monitoring of factory buildings, production areas and major events such as night clubs, music festivals or karting tracks.

Range : 30 … 130dB (A)
Resolution: 0.1dB
Accuracy: ± 1.5dB
Alarm relay: 5A / 240VAC
Supply: 250V / 50Hz
Handle and wall mount
Analogue output signal
Incl. ISO calibration certificate