Zum Hauptinhalt springen
Signal Converter PCE-P17PT-1
US$ 102.00
ex. VAT, ex. delivery costs

The PT-100-transducer PCE-P17PT converts the output signal of a PT100. The PT-100-transducer PCE-P17PT issues the temperature signal as a 4 … 20 mA standard signal.

  • Signal converter for RTD
  • Power supply via electricity loop
  • Low installation width 

Signal Converter PCE-P17PT-2
US$ 102.00
ex. VAT, ex. delivery costs

The PT-100-transducer PCE-P17PT converts the output signal of a PT100. The PT-100-transducer PCE-P17PT issues the temperature signal as a 4 … 20 mA standard signal.

  • Signal converter for RTD
  • Power supply via electricity loop
  • Low installation width 

USB Kit for PCE- IR10
US$ 100.00
ex. VAT, ex. delivery costs
USB kit includes the USB interface, data cable and software. Enables the transfer of measured values to the PC or laptop.
Frequency Indicator PCE-N24Z
US$ 99.90
ex. VAT, ex. delivery costs

The frequency indicator is used to display AC parameters. The frequency indicator can measure and display AC current, AC voltage or frequencies. The possibility of freely scaling the input signal allows a very versatile use of this frequency indicator.

  • Power supply:   230V, 110V, 24V, 20 … 40V AC/DC,   85 … 253 V AC/DC (selectable)
  • Input signal:   1 … 100V, 2.5 … 250V, 4 … 400V,   20 … 500 Hz, 1 A, 5 A (selectable)
  • Display: 4 digits, red
  • Digit height: 20 mm / 0.78"

Air Flow Meter PCE-A 430
US$ 99.00
ex. VAT, ex. delivery costs
The air flow meter enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The air flow meter is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

  • Measuring range: 30 m/s
  • Wind speed up to 105 km/h
  • Units: m/s, km/h, kn, mph
  • Temperature measurement in C° / F°
  • Beaufort scale
  • Cup cross - sensor
Air Quality Meter PCE-VOC 5
US$ 99.00
ex. VAT, ex. delivery costs
The Air Quality Meter is a versatile device for monitoring the air quality in indoor spaces such as homes, offices, workshops, schools or public facilities. It is used for the simultaneous measurement of formaldehyde (HCHO), volatile organic compounds (TVOC), ambient temperature and relative humidity. The Air Quality Meter has a 2.8-inch color display that shows all measured values in real time and also visually assesses the air quality in three stages - green for "good", yellow for "poor" and red for "very poor".

  • HCHO: 0 ... 5 ppm / 0 ... 6.25 mg/m³
  • TVOC: 0 ... 10 mg/m³
  • Temperature: 0 ... 50°C / 32 ... 122°F
  • Relative humidity: 10 ... 90%
  • Acoustic alarm
  • Integrated rechargeable battery
  • Internal memory
Air Velocity Meter PCE-A 430
US$ 99.00
ex. VAT, ex. delivery costs
The air velocity meter enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The air velocity meter is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

  • Measuring range: 30 m/s
  • Wind speed up to 105 km/h
  • Units: m/s, km/h, kn, mph
  • Temperature measurement in C° / F°
  • Beaufort scale
  • Cup cross - sensor
Cup Anemometer PCE-A 430
US$ 99.00
ex. VAT, ex. delivery costs
The cup anemometer enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The cup anemometer is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

  • Measuring range: 30 m/s
  • Wind speed up to 105 km/h
  • Units: m/s, km/h, kn, mph
  • Temperature measurement in C° / F°
  • Beaufort scale
  • Cup cross - sensor
Environmental Meter PCE-A 430
US$ 99.00
ex. VAT, ex. delivery costs
The environmental meter enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The environmental meter is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

  • Measuring range: 30 m/s
  • Wind speed up to 105 km/h
  • Units: m/s, km/h, kn, mph
  • Temperature measurement in C° / F°
  • Beaufort scale
  • Cup cross - sensor
Environmental Meter PCE-VOC 5
US$ 99.00
ex. VAT, ex. delivery costs
The Environmental Meter is a versatile device for monitoring the air quality in indoor spaces such as homes, offices, workshops, schools or public facilities. It is used for the simultaneous measurement of formaldehyde (HCHO), volatile organic compounds (TVOC), ambient temperature and relative humidity. The Environmental Meter has a 2.8-inch color display that shows all measured values in real time and also visually assesses the air quality in three stages - green for "good", yellow for "poor" and red for "very poor".

  • HCHO: 0 ... 5 ppm / 0 ... 6.25 mg/m³
  • TVOC: 0 ... 10 mg/m³
  • Temperature: 0 ... 50°C / 32 ... 122°F
  • Relative humidity: 10 ... 90%
  • Acoustic alarm
  • Integrated rechargeable battery
  • Internal memory
Environmental Tester PCE-A 430
US$ 99.00
ex. VAT, ex. delivery costs
The environmental tester enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The environmental tester is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

  • Measuring range: 30 m/s
  • Wind speed up to 105 km/h
  • Units: m/s, km/h, kn, mph
  • Temperature measurement in C° / F°
  • Beaufort scale
  • Cup cross - sensor
Environmental Tester PCE-VOC 5
US$ 99.00
ex. VAT, ex. delivery costs
The Environmental Tester is a versatile device for monitoring the air quality in indoor spaces such as homes, offices, workshops, schools or public facilities. It is used for the simultaneous measurement of formaldehyde (HCHO), volatile organic compounds (TVOC), ambient temperature and relative humidity. The Environmental Tester has a 2.8-inch color display that shows all measured values in real time and also visually assesses the air quality in three stages - green for "good", yellow for "poor" and red for "very poor".

  • HCHO: 0 ... 5 ppm / 0 ... 6.25 mg/m³
  • TVOC: 0 ... 10 mg/m³
  • Temperature: 0 ... 50°C / 32 ... 122°F
  • Relative humidity: 10 ... 90%
  • Acoustic alarm
  • Integrated rechargeable battery
  • Internal memory
Flow Meter PCE-A 430
US$ 99.00
ex. VAT, ex. delivery costs
The flow meter enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The flow meter is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

  • Measuring range: 30 m/s
  • Wind speed up to 105 km/h
  • Units: m/s, km/h, kn, mph
  • Temperature measurement in C° / F°
  • Beaufort scale
  • Cup cross - sensor
Formaldehyde Meter / Formaldehyde Tester PCE-VOC 5
US$ 99.00
ex. VAT, ex. delivery costs
The Formaldehyde Meter / Formaldehyde Tester is a versatile device for monitoring the air quality in indoor spaces such as homes, offices, workshops, schools or public facilities. It is used for the simultaneous measurement of formaldehyde (HCHO), volatile organic compounds (TVOC), ambient temperature and relative humidity. The Formaldehyde Meter / Formaldehyde Tester has a 2.8-inch color display that shows all measured values in real time and also visually assesses the air quality in three stages - green for "good", yellow for "poor" and red for "very poor".

  • HCHO: 0 ... 5 ppm / 0 ... 6.25 mg/m³
  • TVOC: 0 ... 10 mg/m³
  • Temperature: 0 ... 50°C / 32 ... 122°F
  • Relative humidity: 10 ... 90%
  • Acoustic alarm
  • Integrated rechargeable battery
  • Internal memory
Gas Detector / Gas Detection Instrument PCE-VOC 5
US$ 99.00
ex. VAT, ex. delivery costs
The Gas Detector / Gas Detection Instrument is a versatile device for monitoring the air quality in indoor spaces such as homes, offices, workshops, schools or public facilities. It is used for the simultaneous measurement of formaldehyde (HCHO), volatile organic compounds (TVOC), ambient temperature and relative humidity. The Gas Detector / Gas Detection Instrument has a 2.8-inch color display that shows all measured values in real time and also visually assesses the air quality in three stages - green for "good", yellow for "poor" and red for "very poor".

  • HCHO: 0 ... 5 ppm / 0 ... 6.25 mg/m³
  • TVOC: 0 ... 10 mg/m³
  • Temperature: 0 ... 50°C / 32 ... 122°F
  • Relative humidity: 10 ... 90%
  • Acoustic alarm
  • Integrated rechargeable battery
  • Internal memory
Gas Leak Detector PCE-VOC 5
US$ 99.00
ex. VAT, ex. delivery costs
The Gas Leak Detector is a versatile device for monitoring the air quality in indoor spaces such as homes, offices, workshops, schools or public facilities. It is used for the simultaneous measurement of formaldehyde (HCHO), volatile organic compounds (TVOC), ambient temperature and relative humidity. The Gas Leak Detector has a 2.8-inch color display that shows all measured values in real time and also visually assesses the air quality in three stages - green for "good", yellow for "poor" and red for "very poor".

  • HCHO: 0 ... 5 ppm / 0 ... 6.25 mg/m³
  • TVOC: 0 ... 10 mg/m³
  • Temperature: 0 ... 50°C / 32 ... 122°F
  • Relative humidity: 10 ... 90%
  • Acoustic alarm
  • Integrated rechargeable battery
  • Internal memory
Health & Safety PCE-SRM 10
US$ 99.00
ex. VAT, ex. delivery costs
The Health & Safety is ideal for precisely determining the electrical resistance of materials and surfaces in electronics manufacturing, ESD protection, laboratories and quality control. Thanks to its compact design and ease of use, the Health & Safety is ideal for both mobile applications and stationary measurements.

  • Surface resistance: 10³ Ω ... 10¹⁰ Ω
  • Accuracy: 1 decade
  • Temperature: 0 ... 50°C / 32 ... 122°F
  • Accuracy: ±2°C / ±3.6°F
  • Hold function
HVAC Meter PCE-A 430
US$ 99.00
ex. VAT, ex. delivery costs
The HVAC meter enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The HVAC meter is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

  • Measuring range: 30 m/s
  • Wind speed up to 105 km/h
  • Units: m/s, km/h, kn, mph
  • Temperature measurement in C° / F°
  • Beaufort scale
  • Cup cross - sensor
Surface Testing PCE-SRM 10
US$ 99.00
ex. VAT, ex. delivery costs
The Surface Testing is ideal for precisely determining the electrical resistance of materials and surfaces in electronics manufacturing, ESD protection, laboratories and quality control. Thanks to its compact design and ease of use, the Surface Testing is ideal for both mobile applications and stationary measurements.

  • Surface resistance: 10³ Ω ... 10¹⁰ Ω
  • Accuracy: 1 decade
  • Temperature: 0 ... 50°C / 32 ... 122°F
  • Accuracy: ±2°C / ±3.6°F
  • Hold function
Temperature Meter PCE-A 430
US$ 99.00
ex. VAT, ex. delivery costs
The temperature meter enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The temperature meter is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

  • Measuring range: 30 m/s
  • Wind speed up to 105 km/h
  • Units: m/s, km/h, kn, mph
  • Temperature: -20 °C ... +50 °C
  • Beaufort scale
  • Cup cross - sensor
Temperature Meter PCE-VOC 5
US$ 99.00
ex. VAT, ex. delivery costs
The Temperature Meter is a versatile device for monitoring the air quality in indoor spaces such as homes, offices, workshops, schools or public facilities. It is used for the simultaneous measurement of formaldehyde (HCHO), volatile organic compounds (TVOC), ambient temperature and relative humidity. The Temperature Meter has a 2.8-inch color display that shows all measured values in real time and also visually assesses the air quality in three stages - green for "good", yellow for "poor" and red for "very poor".

  • HCHO: 0 ... 5 ppm / 0 ... 6.25 mg/m³
  • TVOC: 0 ... 10 mg/m³
  • Temperature: 0 ... 50°C / 32 ... 122°F
  • Relative humidity: 10 ... 90%
  • Acoustic alarm
  • Integrated rechargeable battery
  • Internal memory
Thermometer PCE-VOC 5
US$ 99.00
ex. VAT, ex. delivery costs
The Thermometer is a versatile device for monitoring the air quality in indoor spaces such as homes, offices, workshops, schools or public facilities. It is used for the simultaneous measurement of formaldehyde (HCHO), volatile organic compounds (TVOC), ambient temperature and relative humidity. The Thermometer has a 2.8-inch color display that shows all measured values in real time and also visually assesses the air quality in three stages - green for "good", yellow for "poor" and red for "very poor".

  • HCHO: 0 ... 5 ppm / 0 ... 6.25 mg/m³
  • TVOC: 0 ... 10 mg/m³
  • Temperature: 0 ... 50°C / 32 ... 122°F
  • Relative humidity: 10 ... 90%
  • Acoustic alarm
  • Integrated rechargeable battery
  • Internal memory
Wind Measurer PCE-A 430
US$ 99.00
ex. VAT, ex. delivery costs
The wind measurer enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The wind measurer is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

  • Measuring range: 30 m/s
  • Wind speed up to 105 km/h
  • Units: m/s, km/h, kn, mph
  • Temperature measurement in C° / F°
  • Beaufort scale
  • Cup cross - sensor
Wind Speed Meter PCE-A 430
US$ 99.00
ex. VAT, ex. delivery costs
The wind speed meter enables wind speed measurements up to 105 km/h and can be used for a wide range of applications. The wind speed meter is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results.

  • Measuring range: 30 m/s
  • Wind speed up to 105 km/h
  • Units: m/s, km/h, kn, mph
  • Temperature measurement in C° / F°
  • Beaufort scale
  • Cup cross - sensor
Air Humidity Meter PCE-P18S
US$ 97.00
ex. VAT, ex. delivery costs

The Air Humidity Meter PCE-P18S measures air humidity and air temperature. The Air Humidity Meter calculates the dew point and the absolute humidity from these two values. The measurement data from the Air Humidity Meter are output via the Modbus RTU interface.

  • Measuring range:  0 … 100% RH
  • Temperature measuring range: -20 … 60 ° C
  • Modbus RTU interface
  • Various filters optionally available
Humidity Detector PCE-P18S
US$ 97.00
ex. VAT, ex. delivery costs

The Humidity Detector PCE-P18S measures air humidity and air temperature. The Humidity Detector calculates the dew point and the absolute humidity from these two values. The measurement data from the Humidity Detector are output via the Modbus RTU interface.

  • Measuring range:  0 … 100% RH
  • Temperature measuring range: -20 … 60 ° C
  • Modbus RTU interface
  • Various filters optionally available
Hygrometer PCE-P18S
US$ 97.00
ex. VAT, ex. delivery costs

The Hygrometer PCE-P18S measures air humidity and air temperature. The Hygrometer calculates the dew point and the absolute humidity from these two values. The measurement data from the Hygrometer are output via the Modbus RTU interface.

  • Measuring range:  0 … 100% RH
  • Temperature measuring range: -20 … 60 ° C
  • Modbus RTU interface
  • Various filters optionally available
Relative Humidity Meter PCE-P18S
US$ 97.00
ex. VAT, ex. delivery costs

The Relative Humidity Meter PCE-P18S measures air humidity and air temperature. The Relative Humidity Meter calculates the dew point and the absolute humidity from these two values. The measurement data from the Humidity Detector are output via the Modbus RTU interface.

  • Measuring range:  0 … 100% RH
  • Temperature measuring range: -20 … 60 ° C
  • Modbus RTU interface
  • Various filters optionally available
Temperature Meter PCE-P18S
US$ 97.00
ex. VAT, ex. delivery costs

The Temperature Meter PCE-P18S measures air humidity and air temperature. The Temperature Meter calculates the dew point and the absolute humidity from these two values. The measurement data from the Temperature Meter are output via the Modbus RTU interface.

  • Measuring range:  0 … 100% RH
  • Temperature measuring range: -20 … 60 ° C
  • Modbus RTU interface
  • Various filters optionally available
Temperature Sensor PCE-P18S
US$ 97.00
ex. VAT, ex. delivery costs

The Temperature Sensor PCE-P18S measures air humidity and air temperature. The Temperature Sensor calculates the dew point and the absolute humidity from these two values. The measurement data from the Temperature Sensor are output via the Modbus RTU interface.

  • Measuring range:  0 … 100% RH
  • Temperature measuring range: -20 … 60 ° C
  • Modbus RTU interface
  • Various filters optionally available
Thermo Hygrometer PCE-P18S
US$ 97.00
ex. VAT, ex. delivery costs

The Thermo Hygrometer PCE-P18S measures air humidity and air temperature. The Thermo Hygrometer calculates the dew point and the absolute humidity from these two values. The measurement data from the Thermo Hygrometer are output via the Modbus RTU interface.

  • Measuring range:  0 … 100% RH
  • Temperature measuring range: -20 … 60 ° C
  • Modbus RTU interface
  • Various filters optionally available
Process Indicator PCE-N25S
US$ 94.90
ex. VAT, ex. delivery costs
The process indicator is used for processing standardised signals. Depending on your specific needs, the process indicator can be ordered with different inputs, such as 0…20 mA, 4…20 mA, 0…60 mV, 0…10 V, ±60 mV or ±10 V. The input signal of the process indicator is freely scalable, which increases its application possibilities.

  • IP65 protected at the front
  • 6 different standardised signal inputs available
  • configuration via software
  • 5-digit LED display

Handheld Refractometer PCE-ALK Alcohol Content
US$ 93.00
ex. VAT, ex. delivery costs
No-Shopping

PCE-ALK is a handheld refractometer used to determine the % volume of alcohol content (vol%) of pure alcohols and alcoholic solutions. For best results, use this refractometer with sugar-free, pigment-free alcoholic solutions.


  • Measurement range: 0 to 80% (% volume of alcohol content)
  • Resolution: 1 vol% (0 … 60 vol%); 2 vol% (60 … 80 vol%)
  • Accuracy: ±1%

Agricultural measuring device PCE-018 Wine / Juice
US$ 92.00
ex. VAT, ex. delivery costs

PCE-018 is a Agricultural measuring device used to determine the % Brix (sucrose or sugar content) of low-concentration translucent liquids such as fruit and vegetable juices, maple sap and industrial coolants. This portable pocket Brix refractometer is specially designed to provide high-accuracy readings.


  • Measurement range: 0 … 18% Brix
  • Resolution: 0.1 %
  • Accuracy: ±0.1 %

 

Agricultural measuring device PCE-5890 Honey
US$ 92.00
ex. VAT, ex. delivery costs

PCE-5890 is a Agricultural measuring device used to determine the % Brix (sucrose or sugar content), % water content and degrees Baumé (density) of honey. This portable pocket honey refractometer has a triple scale to allow the user to view all three measurement parameters at once.


  • Measurement range: 58 … 90% Brix, 12 … 27%  water content, 35 … 43 Bé°
  • Resolution: 0.5 % or °
  • Accuracy: ±0.5 % or °

 

Automotive Tester / Refractometer PCE-SG Antifreeze
US$ 92.00
ex. VAT, ex. delivery costs
No-Shopping

PCE-SG is an automotive tester or handheld refractometer used to determine the specific gravity (sg) of electrolyte solution batteries as well as the freezing point of propylene or ethylene glycol-based coolants in degrees Celsius (°C). This refractometer works well for measuring cleaning products too. The instrument also gives indication of the charge level in battery acid.


Measurement ranges:

  • 50 … 0 °C for coolant or antifreeze1.15 … 1.30 sg for battery acid
  • 40 … 0 °C for cleaner