Zum Hauptinhalt springen
Gas Detector PCE-LDC 20
US$ 7,785.00
ex. VAT, ex. delivery costs
The gas detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

  • Units: bar, psi, MPa, l/min, m³/h, cfm
  • Leak detection in compressed air, refrigerant  and gas systems
  • Leakage assessment
  • Various attachments
  • Wireless headphones
  • Frequency: 38 . .. 42 kHz
  • Measurement rate: 1 Hz
  • Memory capacity: 1 GB
Gas Detector PCE-LDC 15
US$ 5,775.00
ex. VAT, ex. delivery costs

The gas detector is used in various areas of industry. For example, the gas detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

  • Working frequency: 40 kHz (± 2 kHz)
  • Operating time: >10 hours
  • Various attachments
  • Color display: 3.5" touch panel TFT
  • Soundproof headphones

Gas Detector PCE-WMM 100
US$ 1,237.00
ex. VAT, ex. delivery costs

The gas detector PCE-WMM 100 consists of a main unit and a remote display. The CO2 gas detector is used to measure carbon dioxide and oxygen in a fixed location. The gas detector has two relays that can be used to control alarm lights or sounders.

  • Measuring range CO2: 0 … 50000 ppm
  • Measuring range O2: 0 … 30 %
  • Measuring range temperature: 0 … 50 °C / 32 … 122 °F
  • Main and remote unit
  • Alarm relay
  • 4 … 20 mA analog outputs
  • Acoustic alarm

Gas Detector PCE-AQD 20
US$ 1,200.00
ex. VAT, ex. delivery costs
The gas detector PCE-AQD 20 is an ideal measuring device for monitoring the air quality at workplaces. The PCE-AQD 20 health and gas detector is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function
  • PM2.5
  • Humidity
  • Temperature
  • CO2
  • Air pressure
  • Memory: SD card max. 32 GB
  • Ideal for workplace monitoring
  • Alarm function
Gas Detector PCE-WMM 100-ICA incl. ISO Calibration Certificate
US$ 1,389.00
ex. VAT, ex. delivery costs
ISO Calibration

The gas detector PCE-WMM 100-ICA consists of a main unit and a remote display. The CO2 gas detector is used to measure carbon dioxide and oxygen in a fixed location. The gas detector has two relays that can be used to control alarm lights or sounders.

  • Measuring range CO2: 0 … 50000 ppm
  • Measuring range O2: 0 … 30 %
  • Measuring range temperature: 0 … 50 °C / 32 … 122 °F
  • Main and remote unit
  • Alarm relay
  • 4 … 20 mA analog outputs
  • Acoustic alarm
  • incl. ISO Calibration Certificate

Gas Detector PCE-AQD 20-ICA Incl. ISO Calibration Certificate
US$ 1,314.00
ex. VAT, ex. delivery costs
ISO Calibration
The gas detector PCE-AQD 20 is an ideal measuring device for monitoring the air quality at workplaces. The health and gas detector is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function
  • PM2.5
  • Humidity
  • Temperature
  • CO2
  • Air pressure
  • Memory: SD card max. 32 GB
  • Ideal for workplace monitoring
  • Alarm function
  • Incl. ISO calibration certificate
Gas Detector PCE-WMM 50
US$ 750.00
ex. VAT, ex. delivery costs

PCE-WMM 50 is a wall-mounted gas detector that uses diffusion to monitor carbon dioxide (CO2) gas levels and ambient temperature (ºC / ºF) indoors. This indoor air quality meter features an alarm-activated potential-free contact that can, for example, activate a fan to reduce CO2 gas concentration in the room.


  • CO2 gas measurement range: 0 … 50,000 ppm
  • Temperature measurement range: 0 … +45 ºC / +32 … +113 ºF
  • IP54-rated enclosure on sensor and remote display units
  • 2 adjustable alarm thresholds
  • 3- to 4-digit remote display (depends on range)

Gas Detector PCE-RCM 12
US$ 720.00
ex. VAT, ex. delivery costs
The gas detector PCE-RCM 12 is used for indicative testing of environmental parameters. The gas detector PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the gas detector provides information about these parameters. 


  • Fine dust, CO2, formaldehyde, humidity, temperature
  • Particle size channels: PM 2.5 / PM 10
  • Temperature measuring range: -20 … 70°C / -4 … 158°F
  • Humidity measuring range: 0 … 100% r.H.
  • Formaldehyde measuring range: 0.00 … 5.00 mg/m³
  • CO2 measuring range: 0 … 9999 ppm
  • For indicative measurements
Gas Detector PCE-AQD 10
US$ 682.00
ex. VAT, ex. delivery costs
The gas detector PCE-AQD 10 is used to measure air quality. The gas detector measures carbon dioxide, temperature and humidity. The CO2 sensor from the gas detector is disconnected from the main unit with a connection cable.

  • Measuring range: 0 … 4000 ppm
  • Measuring range: 10 … 90% rh
  • Measuring range: 0 … 50°C / 32 … 122°F
  • Memory on SD card
  • 3 parameters of air quality
  • CO2, air temperature and humidity
Gas Detector PCE-WMM 50-ICA incl. ISO Calibration Certificate
US$ 900.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-WMM 50-ICA is a wall-mounted gas detector that uses diffusion to monitor carbon dioxide (CO2) gas levels and ambient temperature (ºC / ºF) indoors. This indoor air quality meter features an alarm-activated potential-free contact that can, for example, activate a fan to reduce CO2 gas concentration in the room.


  • CO2 gas measurement range: 0 … 50,000 ppm
  • Temperature measurement range: 0 … +45 ºC / +32 … +113 ºF
  • IP54-rated enclosure on sensor and remote display units
  • 2 adjustable alarm thresholds
  • 3- to 4-digit remote display (depends on range)
  • incl. ISO Calibration Certificate

Gas Detector PCE-AQD 10-ICA incl. ISO Calibration Certificate
US$ 850.00
ex. VAT, ex. delivery costs
ISO Calibration
The gas detector is used to measure air quality. The gas detector measures carbon dioxide, temperature and humidity. The CO2 sensor of the gas detector is disconnected from the main unit with a connection cable.

  • Measuring range: 0 … 4000 ppm
  • Measuring range: 10 … 90% RH
  • Measuring range: 0 … 50 °C / 32 … 122 °F
  • Memory on SD card
  • 3 parameters of air quality
  • CO2, air temperature and humidity
  • incl. ISO Calibration Certificate (for CO2 only)
Gas Detector PCE-RCM 11
US$ 535.00
ex. VAT, ex. delivery costs
The gas detector PCE-RCM 11 serves as an indicative test of environmental parameters. The gas detector PCE-RCM 11 enables the measurement of fine dust, temperature and relative humidity. The bright display of the gas detector provides information about the already mentioned parameters. 

  • Fine dust, formaldehyde, humidity, temperature, TVOC
  • Particle size channels : PM 2.5 / PM 10
  • Measuring range TVOC: 0.00 … 9.99 mg / m³ (volatile organic compounds)
  • Measuring range temperature: -20 … 70°C / -4 … 158°F
  • Measuring range humidity: 0 … 100% RH
  • Measuring range formaldehyde: 0.00 … 5.00 mg / m³
  • Interface: USB
  • For indicative measurements
Gas Detector PCE-HLD 10
US$ 535.00
ex. VAT, ex. delivery costs

With its hydrogen-selective sensor, the gas detector can detect the smallest leaks with a very low leak rate. Containers or lines that do not contain hydrogen can also be checked for leaks with the gas detector if they are filled with test gas containing hydrogen and then checked for leaks.

  • High sensitivity: > 2 g / year
  • Medium sensitivity: > 15 g / year
  • Low sensitivity: > 30 g / year - bar display with traffic light function
  • Three adjustable sensitivities
  • Semi-rigid probe with a length of 40 cm / 15.7"
  • Audible and visual alarm

Gas Detector PCE-AQD 50
US$ 528.00
ex. VAT, ex. delivery costs
Topseller

The gas detector is specially designed for long-term monitoring of climatic conditions in, for example, offices, classrooms or lecture halls. The gas detector is equipped with various sensors.

Parameters / Measuring ranges:

  • Temperature: 0 … +50 ºC / 32 … 122 ºF
  • Ambient humidity: 0 … 100% RH
  • Atmospheric pressure: 300 … 2000 hPa
  • CO2: 0 … 40000 ppm
  • 32 GB data storage
  • E-paper display with histogram display
  • Good / medium / bad rating
  • Battery life: approx. 10 months

Gas Detector / Gas Detection Instrument PCE-GA 25
US$ 718.00
ex. VAT, ex. delivery costs
The Gas Detector / Gas Detection Instrument enables simultaneous monitoring of up to four gases and ensures reliable safety in demanding working environments. The Gas Detector / Gas Detection Instrument detects combustible gases, oxygen and toxic gases and provides a rapid alarm when limit values are exceeded.

  • Flammable gases: 0 ... 100 %LEL
  • O2: 0 ... 30% vol
  • CO: 0 ... 1000 ppm
  • H2S: 0 ... 100 ppm
  • Accuracy: ±5% F.S.
  • LCD display with status indicator
  • Visual, audible and vibration alarm
  • Data memory for alarm events
  • Operating modes: measurement, self-test, calibration
  • Li-ion battery for up to 8 hours of operation
  • Protection class: IP66
CO2 Gas Detector PCE-AC 2000
US$ 529.00
ex. VAT, ex. delivery costs

The innovatively designed CO2 gas detector is a large display for monitoring the indoor air quality. This CO2 gas detector is used specifically to monitor the indoor air quality in large rooms. These include, for example, meeting rooms, lounges, offices or public spaces such as classrooms or kindergartens.

  • Measuring range CO2: 0 … 9999 ppm
  • Temperature measuring range: -10.0 … 100.0 °C
  • Humidity measuring range: 0 … 99% r.h.
  • Traffic light bar graph
  • Acoustic, adjustable alarm

Gas Detector / Gas Detection Instrument PCE-AQD 50A-ICA incl. ISO-Calibration Certificate
US$ 750.00
ex. VAT, ex. delivery costs
ISO Calibration
The Gas Detector / Gas Detection Instrument is specially designed for long-term monitoring of climatic conditions in, for example, offices, classrooms or lecture halls. The Gas Detector / Gas Detection Instrument is equipped with various sensors.
Parameters / Measuring ranges:

  • Temperature: 0 ... +50 ºC / 32 ... 122 ºF
  • Ambient humidity: 0 ... 100% RH
  • Atmospheric pressure: 300 ... 2000 hPa
  • CO2: 0 ... 40000 ppm
  • 32 GB data storage
  • E-paper display with histogram display
  • Good / medium / bad rating
  • Battery life: approx. 10 months
  • incl. ISO-Calibration Certificate
Gas Detector PCE-CMM 10-ICA incl. ISO Calibration Certificate
US$ 543.00
ex. VAT, ex. delivery costs
ISO Calibration

The Gas Detector PCE-CMM 10-ICA is a multi-function meter for measuring the air quality. This gas detector measures synchronously the CO2 concentration, the air temperature and the humidity.

  • Measuring range CO2: 400 … 5000 ppm
  • Measuring range temperature: -10.0 … 50.0°C / 14 … 122°F
  • Measuring range humidity: 0 … 99% rh
  • Battery operation
  • Limit exceeded
  • Beep
  • incl. ISO Calibration Certificate (for CO2 only)

Gas Detector PCE-COG 10
US$ 442.00
ex. VAT, ex. delivery costs
Topseller

The gas detector has a CO² measuring range of 0 … 9999 ppm. In addition to the carbon dioxide measurement, the gas detector also has a carbon monoxide (CO) sensor with a measuring range of 0 … 1000 ppm and a temperature and humidity sensor.

  • Carbon monoxide (CO): 0 … 1000 ppm
  • Carbon dioxide (CO²): 0 … 9999 ppm
  • Temperature: 0 … 50 °C / 32 … 122 °F
  • Humidity: 0 … 100% RH
  • Data memory for 5000 measuring points
  • Data export CSV
  • Power supply: rechargeable battery

Gas Detector / Gas Detection Instrument PCE-AQD 50A
US$ 600.00
ex. VAT, ex. delivery costs
The Gas Detector / Gas Detection Instrument is specially designed for long-term monitoring of climatic conditions in, for example, offices, classrooms or lecture halls. The Gas Detector / Gas Detection Instrument is equipped with various sensors.
Parameters / Measuring ranges:

  • Temperature: 0 ... +50 ºC / 32 ... 122 ºF
  • Ambient humidity: 0 ... 100% RH
  • Atmospheric pressure: 300 ... 2000 hPa
  • CO2: 0 ... 40000 ppm
  • 32 GB data storage
  • E-paper display with histogram display
  • Good / medium / bad rating
  • Battery life: approx. 10 months
Gas Detector PCE-CMM 10
US$ 370.00
ex. VAT, ex. delivery costs
The gas detector PCE-CMM 10 is a multi-function meter for measuring the air quality. This gas detector measures synchronously the CO2 concentration, the air temperature and the humidity. 

  • Measuring range CO2: 400 … 5000 ppm
  • Measuring range temperature: -10.0 … 50.0°C / 14 … 122°F
  • Measuring range humidity: 0 … 99% rh
  • Battery operation
  • Limit exceeded
  • Beep
Gas Detection Instrument PCE-RD 100
US$ 450.00
ex. VAT, ex. delivery costs
The Gas Detection Instrument offers precise monitoring of the radon concentration within the range of 0.1 ... 99.9 pCi/L with an accuracy of < 10% at 10 pCi/L and a sensitivity of 30 CPH at 1 pCi/L. Our Gas Detection Instrument discovers radon at an early stage, minimises health risks and enables continuous real-time monitoring. Current measurement data is recorded every 10 minutes and average values are calculated for 1 hour, 1 day and 7 days. The first reliable data output takes less than 1 hour.

  • measurement range: 0.1 ... 99.9 pCi/L (3700 Bq/m³)
  • resolution: 0.01 pCi/L
  • accuracy: <10 % at 10 pCi/L
  • data export to PC via memory card
  • app connection via WiFi
  • adjustable alarm
  • display: green, yellow, red
Gas Detector PCE-GA 12
US$ 336.00
ex. VAT, ex. delivery costs
The gas detector PCE-GA 12 is a very easy-to-use measuring device. This gas detector detects combustible gases and emits a vibrating alarm as well as an audible alarm once a combustible gas has been detected by the gas detector. 

  • Measuring range up to 10000 ppm
  • Audible alarm with 85 dB
  • Rechargeable battery for mobile use
  • Automatic calibration
  • For the detection of combustible gases
Gas Detector PCE-CMM 8-ICA incl. ISO Calibration Certificate
US$ 459.00
ex. VAT, ex. delivery costs
ISO Calibration

With the gas detector you can ensure the right climate in your office. The gas detector measures the CO2 content of the air, the relative humidity and the room temperature. The gas detector shows carbon dioxide concentrations up to 9999 ppm, temperatures from -10… 50 °C, and relative humidity values from 20… 95%.

  • Large CO2 measuring range up to 9999 ppm
  • Traffic light function for carbon dioxide
  • Measures temperature and humidity
  • Network operation
  • Suitable for classrooms, offices, lecture halls
  • incl. ISO Calibration Certificate (for CO2 only)

Gas Detector PCE-CMM 5-ICA incl. ISO Calibration Certificate
US$ 450.00
ex. VAT, ex. delivery costs
ISO Calibration
The gas detector measures the CO2 content in the air and shows the measured value on a large LCD display. The CO2 content in the air is an important measure for checking the ventilation behavior in offices, classrooms, lecture halls, etc.

  • Temperature measuring range: -10 … 50 ° C
  • Large CO2 measuring range up to 5000 ppm
  • Traffic light function for carbon dioxide
  • Measures humidity
  • 5 h graph for long-term monitoring
  • Battery and mains operation
  • Suitable for classrooms, nurseries/kindergartens, lecture halls
  • incl. ISO calibration certificate (for CO2 only)
Gas Detector PCE-GA 10
US$ 291.00
ex. VAT, ex. delivery costs
The gas detector PCE-GA 10 is used to check for leaks in gas pipes and connections. This gas detector is suitable for many combustible gases. The gas detector has 5 LEDs that inform the gas intensity.

  • Up to 15 gases
  • For flammable gases
  • 500 mm / 19.6" sensor
  • Visual, audible and haptic alarm
Gas Detector PCE-CMM 8
US$ 289.00
ex. VAT, ex. delivery costs
Topseller

With the gas detector you can ensure the right climate in your office. The gas detector measures the CO2 content of the air, the relative humidity and the room temperature. The gas detector shows carbon dioxide concentrations up to 9999 ppm, temperatures from -10… 50 °C, and relative humidity values from 20… 95%.

  • Large CO2 measuring range up to 9999 ppm
  • Traffic light function for carbon dioxide
  • Measures temperature and humidity
  • Network operation
  • Suitable for classrooms, offices, lecture halls

VOC Gas Detector PCE-VOC 1
US$ 345.00
ex. VAT, ex. delivery costs

PCE-VOC 1 is a portable handheld volatile organic compound (VOC) and formaldehyde (HCHO) meter or gas leak detector for indoor air quality (IAQ) monitoring applications. This easy-to-use VOC meter is ideal for measuring total volatile organic compound (TVOC) and formaldehyde (HCHO) levels in homes, offices, factories, laboratories, hotels, schools and other indoor environments.


  • TVOC range: 0.00… 9.99 ppm
  • HCHO range: 0.00… 5.00 ppm
  • Displays units in ppm or mg/m³
  • Audible and visual alarms
  • Long-lasting rechargeable battery

Gas Detector PCE-CMM 5
US$ 279.00
ex. VAT, ex. delivery costs
Topseller
The gas detector PCE-CMM 5 measures the CO2 content in the air and shows the measured value on a large LCD display. The CO2 content in the air is an important measure for checking the ventilation behavior in offices, classrooms, lecture halls, etc.

  • Large CO2 measuring range up to 5000 ppm
  • Traffic light function for carbon dioxide
  • Measures temperature and humidity
  • 5 h graph for long-term monitoring
  • Battery and power adapter operation
  • Suitable for classrooms, nurseries/kindergartens, lecture halls
Gas Detector PCE-EM 880
US$ 285.00
ex. VAT, ex. delivery costs
The gas detector is equipped with various sensors to determine HCHO, TVOC, ambient temperature and ambient humidity. The gas detector thus already covers a large spectrum of measuring tasks.

  • HCHO measuring range: 0.00 … 5.00 mg/m³
  • TVOC measuring range: 0.00 … 9.99 mg/m³
  • Temperature measuring range: 0 … 50 °C / 32 … 122 °F
  • Humidity measuring range: 0 … 100% RH
  • Memory for 5000 measuring points
  • Battery and mains operation
Gas Leak Detector PCE-EM 880
US$ 285.00
ex. VAT, ex. delivery costs
The gas leak detector is equipped with various sensors to determine HCHO, TVOC, ambient temperature and ambient humidity. The gas leak detector thus already covers a large spectrum of measuring tasks.

  • HCHO measuring range: 0.00 … 5.00 mg/m³
  • TVOC measuring range: 0.00 … 9.99 mg/m³
  • Temperature measuring range: 0 … 50 °C / 32 … 122 °F
  • Humidity measuring range: 0 … 100% RH
  • Memory for 5000 measuring points
  • Battery and mains operation
CFC / HFC Refrigerant Gas Detector PCE-LD 1
US$ 309.00
ex. VAT, ex. delivery costs

PCE-LD 1 is a portable handheld gas detector used to locate CFC/HFC refrigerant gas leaks. This highly sensitive gas leak detector can locate gas leaks from HVACR refrigeration systems even in areas contaminated by other gases. The gas sensor is located at the end of a 390 mm / 15.35 in flexible goose-neck tube, allowing unique access to hard-to-reach places.

  • Adjustable high/low sensitivity:6 g/yr or 30 g/yr for R-22 and R-134a8 g/yr or 40 g/yr for R404A, R-407C and R-410A

Gas Detector / Gas Detection Instrument PCE-RD 75
US$ 285.00
ex. VAT, ex. delivery costs
Our Gas Detector / Gas Detection Instrument provides precise measurements of indoor radon concentrations with a measurement range of 2 Bq/m³ ... 20 kBq/m³. The Gas Detector / Gas Detection Instrument is an important tool for homeowners, landlords and construction companies to effectively minimise health risks from radon exposure and ensure safe indoor air.

  • measurement range: 2 Bq/m³ ... 20 kBq/m³
  • resolution: 1 Bq/m³
  • accuracy: ±10 %
  • data export: USB flash drive protocol
  • colourful radon value arc indicator
  • adjustable alarm
Gas Detector / Gas Detection Instrument PCE-RD 50
US$ 234.00
ex. VAT, ex. delivery costs
The Gas Detector / Gas Detection Instrument is a compact and handy measuring device for precise monitoring of the radon concentration indoors. With a measuring range of 0 ... 9999 Bq/m³ and a semiconductor detector, the Gas Detector / Gas Detection Instrument provides reliable measured values after just one hour. It provides both short-term average values (updated hourly) and long-term average values (updated every 24 hours up to 1 year) for a detailed analysis of radon exposure.

  • Measuring range: 0 ... 9999 Bq/m³
  • Resolution: 1 Bq/m³
  • Measuring range: 0 ... 500 pCi/L
  • Resolution: 0.01 pCi/L
  • Accuracy: 7 days <10 %, 2 months <5 % @ 200 Bq/m³
  • Alarm: acoustic, visual
  • Display: green, yellow, red
Gas Detector / Gas Detection Instrument PCE-GA 8
US$ 219.00
ex. VAT, ex. delivery costs
Gas Detector / Gas Detection Instrument for precise measurement of oxygen content in the air, with integrated 3000 mA lithium battery and USB charging function. The Gas Detector / Gas Detection Instrument also offers temperature and humidity measurement, plus a clear display with multiple display modes.

  • Oxygen: 0 ... 30% vol.
  • Resolution: 0.1% vol.
  • Accuracy: ±0.3% of reading
  • Temperature: -9 ... 55°C / 15.8 … 131°F
  • Humidity: 0 ... 100% RH
  • Memory: 100,000 data sets
  • Adjustable alarm
  • Graphical trend display
Gas Detector / Gas Detection Instrument PCE-RD 65
US$ 205.00
ex. VAT, ex. delivery costs
The compact Gas Detector / Gas Detection Instrument offers a precise and long-term stable solution for monitoring indoor radon concentrations. It is ideal for use in various environments such as homes, offices and laboratories. The Gas Detector / Gas Detection Instrument displays minimum, maximum and AVG values as well as cumulative average values and the values for 12, 24, 48 and 96 hours.

  • Measuring range: 3.3 Bq/m³ ... 37 kBq/m³
  • Resolution 1 Bq/m³
  • Accuracy: ±15 %
  • Units: kBq/m³, pCi/L
  • Adjustable alarm
  • Coloured radon value display