Products for 'man metro pce instruments man metro pce p01 ica incl certificado de calibraci n iso'

NDT Test Instruments PCE-CT 100N-ICA incl. ISO Calibration Certificate

US$ 2,864.00

ex. VAT, ex. delivery costs

The coating thickness automotive tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the automotive tester are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

NDT Test Instruments PCE-PGM 100-ICA incl. ISO calibration certificate

US$ 2,703.00

ex. VAT, ex. delivery costs

The PCE-PGM 100 Surface Testing works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the Surface Testing emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.

Measurement geometry: 20° / 60° / 85°
Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
Measuring range: 20°: 0 … 1000 GU / 60°: 0 … 1000 GU / 85°: 0 … 160 GU
Incl. ISO calibration certificate

Roughness Tester PCE-RT 10-ICA Incl. ISO Calibration Certificate

US$ 2,660.00

ex. VAT, ex. delivery costs

The Roughness Tester PCE-RT 10-ICA is a small, light device with simple navigation. Despite the fact that the device functions on a very complex and elaborate level, the measurement results can be acquired quickly and in an accurate way. Very simple to operate with a motorized diamond sensor.

Measures Ra in Metric (µm) and Imperial (µinch)
Ra 0.05 to 10um / 2 µinch … 400 µinch measurement range
Rz 0.1 to 50um / 3.93 µinch … 1968.50 µinch measurement range
Induction method with Diamond sensor
Accuracy < ± 10% and Repeatability < 6%
With threshold function
Uses 4 AA Batteries (Included)
Incl. ISO calibration certificate

Profilometer PCE-RT 2000-ICA Incl. ISO Calibration Certificate

US$ 2,806.00

ex. VAT, ex. delivery costs

The profilometer PCE-RT 2000-ICA is used for accurate measurement of surface roughness. The profilometer PCE-RT 2000-ICA can be used on all surfaces. The roughness with the profilometer is precisely recorded via the piezo probe. The profilometer PCE-RT 2000 can be purchased here in our online shop.

Measures Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc in both Metric (µm) and Imperial (µinch)
Ra, Rq, Rc : 0.005 μm…16 μm / 0.197 µinch … 629.921 µinch measurement range
Rz, Rt Rp, Rv: 0.020 µm … 200 µm / 0.797 µinch … 7874.016 µinch measurement range
Rsm: 5 μm …1000 μm / 1968 µinch … 3937 µinch measurement range
Rsk: -1 …. 1 measurement range
Measurement accuracy: <± 10% and Repeatability < 6%
Robust Piezoelectric sensor
Saves up to 20 Data points
3 different cutoff wavelengths
Micro USB Interface
PC Software
Built-in rechargeable li-ion battery
Incl. ISO calibration certificate

Spectrophotometer PCE-CSM 3-ICA incl. ISO-Calibration Certificate

US$ 2,874.00

ex. VAT, ex. delivery costs

The Spectrophotometer PCE-CSM 3 was developed for quality control and inspection and offers a very high accuracy reading. You can choose between different color spaces (CIE L*a*b*C*h, CIE L*a*b*). After a measurement with the Spectrophotometer, the reading can be stored as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily. Delta pass/fail indication.

CIE L*a*b*C*h or CIE L*a*b*
Measuring geometry 8°/d
White calibration disk
Stores 100 reference values and 20,000 samples
Measuring aperture is 8 mm- Optional liquid sample kit listed under accessories
incl. ISO-Calibration Certificate

IoT Sensor PCE-CT 100N-ICA incl. ISO Calibration Certificate

US$ 2,864.00

ex. VAT, ex. delivery costs

The IoT sensor works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the IoT sensor are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

Roughness Tester PCE-RT 1200-ICA Incl. ISO Calibration Cert.

US$ 3,041.00

ex. VAT, ex. delivery costs

The Roughness Tester PCE-RT 1200-ICA is used to determine surface roughness. The compact roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The roughness tester PCE-RT 1200-ICA is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
Ra, Rq: 0.005 … 16.00 μm / 0.197µinch… 629.921 µinch measurement range
Rz, Rt: 0.002 … 200.0 μm / 0.079µinch… 7874.016 µinch measurement range
Induction method with Diamond sensor
Accuracy < ± 10% and Repeatability < 6%
Saves up to 20 Data points
Micro-USB interface
Built-in rechargeable li-ion battery
Incl. ISO calibration certificate

Spectrophotometer PCE-CSM 4-ICA incl. ISO-Calibration Certificate

US$ 2,986.00

ex. VAT, ex. delivery costs

This Spectrophotometer is especially designed for meat, food, vegetables or wet products testing. Only the aperture comes into contact with the surfaces to be measured. So it is guaranteed that no liquids can cause cross contamination while doing the measurement. The Spectrophotometer simulates to see surfaces like with human eyes.

Measuring aperture of 20 mm and 45°/0° illumination/viewing angle
Rechargeable lithium-ion battery
Auto white black calibration
Designed specifically for the food industry
Software included
incl. ISO-Calibration Certificate

Colorimeter PCE-CSM 4-ICA incl. ISO-Calibration Certificate

US$ 2,986.00

ex. VAT, ex. delivery costs

This Colorimeter is especially designed for meat, food, vegetables or wet products testing. Only the aperture comes into contact with the surfaces to be measured. So it is guaranteed that no liquids can cause cross contamination while doing the measurement. The Colorimeter simulates to see surfaces like with human eyes.

Measuring aperture of 20 mm and 45°/0° illumination/viewing angle
Rechargeable lithium-ion battery
Auto white black calibration
Designed specifically for the food industry
Software included
incl. ISO-Calibration Certificate