Zum Hauptinhalt springen
Condition Monitoring Gas Leak Detector PCE-LDC 8
US$ 2,151.00
ex. VAT, ex. delivery costs
The conditon monitoring gas leak detector is used to locate leaks on compressed air lines. Furthermore, the conditon monitoring gas leak detector can also be used on coolant lines or gas lines for leak detection.

  • Measuring principle: ultrasound
  • Measuring principle: air, coolant, non-explosive gases
  • Working frequency of 40 kHz
  • up to 6 h battery operation 
  • Leak detection via headphones and LCD display
  • Localize leaks up to 18m, 59 ft.
Gas Leak Detector PCE-LDC 8
US$ 2,151.00
ex. VAT, ex. delivery costs
The Gas Leak Detector is used to locate leaks on compressed air lines. Furthermore, the Gas Leak Detector can also be used on coolant lines or gas lines for leak detection.

  • Measuring principle: ultrasound
  • Measuring principle: air, coolant, non-explosive gases
  • Working frequency of 40 kHz
  • up to 6 h battery operation 
  • Leak detection via headphones and LCD display
  • Localize leaks up to 18m, 59 ft.
Leak Detector PCE-LDC 8
US$ 2,151.00
ex. VAT, ex. delivery costs
The Leak Detector is used to locate leaks on compressed air lines. Furthermore, the Leak Detector can also be used on coolant lines or gas lines for leak detection.

  • Measuring principle: ultrasound
  • Measuring principle: air, coolant, non-explosive gases
  • Working frequency of 40 kHz
  • up to 6 h battery operation 
  • Leak detection via headphones and LCD display
  • Localize leaks up to 18m, 59 ft.
NDT Test Instruments PCE-LDC 8
US$ 2,151.00
ex. VAT, ex. delivery costs
The Leak Detector is used to locate leaks on compressed air lines. Furthermore, the Leak Detector can also be used on coolant lines or gas lines for leak detection.

  • Measuring principle: ultrasound
  • Measuring principle: air, coolant, non-explosive gases
  • Working frequency of 40 kHz
  • up to 6 h battery operation 
  • Leak detection via headphones and LCD display
  • Localize leaks up to 18m, 59 ft.
Refrigerant Gauges PCE-LDC 8
US$ 2,151.00
ex. VAT, ex. delivery costs
The Refrigerant Gauges is used to locate leaks on compressed air lines. Furthermore, the Refrigerant Gauges can also be used on coolant lines or gas lines for leak detection.

  • Measuring principle: ultrasound
  • Measuring principle: air, coolant, non-explosive gases
  • Working frequency of 40 kHz
  • up to 6 h battery operation 
  • Leak detection via headphones and LCD display
  • Localize leaks up to 18m, 59 ft.
Ultrasonic Leak Detector PCE-LDC 8
US$ 2,151.00
ex. VAT, ex. delivery costs
The Ultrasonic Leak Detector is used to locate leaks on compressed air lines. Furthermore, the Ultrasonic Leak Detector can also be used on coolant lines or gas lines for leak detection.

  • Measuring principle: ultrasound
  • Measuring principle: air, coolant, non-explosive gases
  • Working frequency of 40 kHz
  • up to 6 h battery operation 
  • Leak detection via headphones and LCD display
  • Localize leaks up to 18m, 59 ft.
Ultrasonic Leak Detector PCE-LDC 8
US$ 2,151.00
ex. VAT, ex. delivery costs
The Ultrasonic Leak Detector is used to locate leaks on compressed air lines. Furthermore, the Ultrasonic Leak Detector can also be used on coolant lines or gas lines for leak detection.

  • Measuring principle: ultrasound
  • Measuring principle: air, coolant, non-explosive gases
  • Working frequency of 40 kHz
  • up to 6 h battery operation 
  • Leak detection via headphones and LCD display
  • Localize leaks up to 18m, 59 ft.
Ultrasonic testing device PCE-LDC 8
US$ 2,151.00
ex. VAT, ex. delivery costs
The Ultrasonic testing device is used to locate leaks on compressed air lines. Furthermore, the Ultrasonic testing device can also be used on coolant lines or gas lines for leak detection.

  • Measuring principle: ultrasound
  • Measuring principle: air, coolant, non-explosive gases
  • Working frequency of 40 kHz
  • up to 6 h battery operation 
  • Leak detection via headphones and LCD display
  • Localize leaks up to 18m, 59 ft.
Material Tester PCE-RT 11-ICA Incl. ISO Calibration Certificate
US$ 2,146.00
ex. VAT, ex. delivery costs
ISO Calibration

The Material Tester PCE-RT 11-ICA is a portable measuring instrument for determination of surface roughness according to Ra, Rz, Rq and Rt in just one device.


  • Measures Ra, Rz, Rq and Rt in both Metric (µm) and Imperial (µinch)
  • Ra, Rq: 0.05 µm … 10 µm / 0.002 µinch … 394 µinch measurement range
  • Rz, Rt: 0.1 µm … 50 µm / 0.004 µinch …1968 µinch measurement range
  • Robust Piezoelectric sensor
  • Accuracy: ± 15% and Repeatability < 12%
  • Built-in rechargeable li-ion battery
  • Inc. ISO Calibration Certificate
Paint Roughness Tester PCE-RT 11-ICA Incl. ISO Calibration Certificate
US$ 2,146.00
ex. VAT, ex. delivery costs
ISO Calibration

The Roughness Tester PCE-RT 11-ICA is a portable measuring instrument for determination of surface roughness according to Ra, Rz, Rq and Rt in just one device. The small roughness tester is especially designed for fast measuring of roughness.


  • Measures Ra, Rz, Rq and Rt in both Metric (µm) and Imperial (µinch)
  • Ra, Rq: 0.05 µm … 10 µm / 0.002 µinch … 394 µinch measurement range
  • Rz, Rt: 0.1 µm … 50 µm / 0.004 µinch …1968 µinch measurement range
  • Robust Piezoelectric sensor
  • Accuracy: ± 15% and Repeatability < 12%
  • Built-in rechargeable li-ion battery
  • Inc. ISO Calibration Certificate
Profilometer PCE-RT 11-ICA Incl. ISO Calibration Certificate
US$ 2,146.00
ex. VAT, ex. delivery costs
ISO Calibration

The Profilometer PCE-RT 11-ICA is a portable measuring instrument for determination of surface roughness according to Ra, Rz, Rq and Rt in just one device.


  • Measures Ra, Rz, Rq and Rt in both Metric (µm) and Imperial (µinch)
  • Ra, Rq: 0.05 µm … 10 µm / 0.002 µinch … 394 µinch measurement range
  • Rz, Rt: 0.1 µm … 50 µm / 0.004 µinch …1968 µinch measurement range
  • Robust Piezoelectric sensor
  • Accuracy: ± 15% and Repeatability < 12%
  • Built-in rechargeable li-ion battery
  • Inc. ISO Calibration Certificate
Roughness Tester PCE-RT 11-ICA Incl. ISO Calibration Certificate
US$ 2,146.00
ex. VAT, ex. delivery costs
ISO Calibration

The Roughness Tester PCE-RT 11-ICA is a portable measuring instrument for determination of surface roughness according to Ra, Rz, Rq and Rt in just one device. The small roughness tester is especially designed for fast measuring of roughness.


  • Measures Ra, Rz, Rq and Rt in both Metric (µm) and Imperial (µinch)
  • Ra, Rq: 0.05 µm … 10 µm / 0.002 µinch … 394 µinch measurement range
  • Rz, Rt: 0.1 µm … 50 µm / 0.004 µinch …1968 µinch measurement range
  • Robust Piezoelectric sensor
  • Accuracy: ± 15% and Repeatability < 12%
  • Built-in rechargeable li-ion battery
  • Inc. ISO Calibration Certificate
Surface Testing - Roughness Tester PCE-RT 11-ICA Incl. ISO Calibration Cert.
US$ 2,146.00
ex. VAT, ex. delivery costs
ISO Calibration

The Surface Tester PCE-RT 11-ICA is a portable measuring instrument for determination of surface roughness according to Ra, Rz, Rq and Rt in just one device. The small roughness tester is especially designed for fast measuring of roughness. The roughness is a term of surface physics that describes unevenness of surface height.


  • Measures Ra, Rz, Rq and Rt in both Metric (µm) and Imperial (µinch)
  • Ra, Rq: 0.05 µm … 10 µm / 0.002 µinch … 394 µinch measurement range
  • Rz, Rt: 0.1 µm … 50 µm / 0.004 µinch …1968 µinch measurement range
  • Robust Piezoelectric sensor
  • Accuracy: ± 15% and Repeatability < 12%
  • Built-in rechargeable li-ion battery
  • Inc. ISO Calibration Certificate

Anemometer / Anemometers for all applications PCE-WSAC 50W+ 230
US$ 2,145.00
ex. VAT, ex. delivery costs
The Anemometer / Anemometers for all applications with data logger can be used for monitoring and alerting the current wind speed. The Anemometer / Anemometers for all applications can be used in various fields of application where a radio version is required.

  • measurement range up to 180 km/h
  • input: pulse, analogue (4 ... 20 mA) or radio transmission
  • 4 ... 20 mA analogue output
  • supply voltage: 110 ... 230 V AC , 50 / 60 Hz
  • ambient temperature -20 ... +70 °C
  • units adjustable: km/h, mph, m/s
  • protection class: IP65
  • alarm relay
  • data logger
Anemometer / Anemometers for all applications PCE-WSAC 50W+ 24
US$ 2,145.00
ex. VAT, ex. delivery costs
The Anemometer / Anemometers for all applications with data logger can be used for monitoring and alerting the current wind speed. The Anemometer / Anemometers for all applications can be used in various fields of application where a radio version is required.

  • measurement range up to 180 km/h
  • input: pulse, analogue (4 ... 20 mA) or radio transmission
  • 4 ... 20 mA analogue output
  • supply voltage: 24 V DC
  • ambient temperature -20 ... +70 °C
  • units adjustable: km/h, mph, m/s
  • protection class: IP65
  • alarm relay
  • data logger
Automotive Tester PCE-CT 100N
US$ 2,145.00
ex. VAT, ex. delivery costs
Wireless
The coating thickness automotive tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the automotive tester are used for the non-destructive testing of materials.

  • Measuring range: 0 … 1250 µm
  • Accuracy: ± (1% + 1 µm)
  • Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
  • Measurement data storage for up to 500 data
  • Data transfer via wifi and USB
  • Two different probes for NFe and Fe (included)
Car Measuring Device PCE-CT 100N
US$ 2,145.00
ex. VAT, ex. delivery costs
Wireless
The car measuring device works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the car measuring device are used for the non-destructive testing of materials.

  • Measuring range: 0 … 1250 µm
  • Accuracy: ± (1% + 1 µm)
  • Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
  • Measurement data storage for up to 500 data
  • Data transfer via wifi and USB
  • Two different probes for NFe and Fe (included)
Coating Thickness Gauge PCE-CT 100N
US$ 2,145.00
ex. VAT, ex. delivery costs
Wireless
The coating thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the coating thickness gauge are used for the non-destructive testing of materials.

  • Measuring range: 0 … 1250 µm
  • Accuracy: ± (1% + 1 µm)
  • Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
  • Measurement data storage for up to 500 data
  • Data transfer via Wifi and USB
  • Two different probes for NFe and Fe (included)
Electrical Tester PCE-MO 2010
US$ 2,145.00
ex. VAT, ex. delivery costs
The electrical tester with seven selectable measuring ranges from 0 µΩ to 200 Ω, a maximum resolution of 0.1 µΩ and a maximum test current of 10 A offers a wide range of applications. Thanks to the 4-wire measuring method, the electrical tester guarantees accurate measurements at the lowest resistances without the influence of the lead resistance.

  • Measuring range 0 µΩ … 200 Ω
  • Resolution: 0.1 µΩ
  • Accuracy: 1 %
  • Test current: 10 A, 1 A, 100 mA, 10 mA
  • Memory for 200 measured values
  • Software with data export
Environmental Meter PCE-WSAC 50W+ 230
US$ 2,145.00
ex. VAT, ex. delivery costs
The Environmental Meter with data logger can be used for monitoring and alerting the current wind speed. The Environmental Meter can be used in various fields of application where a radio version is required.

  • measurement range up to 180 km/h
  • input: pulse, analogue (4 ... 20 mA) or radio transmission
  • 4 ... 20 mA analogue output
  • supply voltage: 110 ... 230 V AC , 50 / 60 Hz
  • ambient temperature -20 ... +70 °C
  • units adjustable: km/h, mph, m/s
  • protection class: IP65
  • alarm relay
  • data logger
Environmental Meter PCE-WSAC 50W+ 24
US$ 2,145.00
ex. VAT, ex. delivery costs
The Environmental Meter with data logger can be used for monitoring and alerting the current wind speed. The Environmental Meter can be used in various fields of application where a radio version is required.

  • measurement range up to 180 km/h
  • input: pulse, analogue (4 ... 20 mA) or radio transmission
  • 4 ... 20 mA analogue output
  • supply voltage: 24 V DC
  • ambient temperature -20 ... +70 °C
  • units adjustable: km/h, mph, m/s
  • protection class: IP65
  • alarm relay
  • data logger
Environmental Tester PCE-WSAC 50W+ 230
US$ 2,145.00
ex. VAT, ex. delivery costs
The Environmental Tester with data logger can be used for monitoring and alerting the current wind speed. The Environmental Tester can be used in various fields of application where a radio version is required.

  • measurement range up to 180 km/h
  • input: pulse, analogue (4 ... 20 mA) or radio transmission
  • 4 ... 20 mA analogue output
  • supply voltage: 110 ... 230 V AC , 50 / 60 Hz
  • ambient temperature -20 ... +70 °C
  • units adjustable: km/h, mph, m/s
  • protection class: IP65
  • alarm relay
  • data logger
Environmental Tester PCE-WSAC 50W+ 24
US$ 2,145.00
ex. VAT, ex. delivery costs
The Environmental Tester with data logger can be used for monitoring and alerting the current wind speed. The Environmental Tester can be used in various fields of application where a radio version is required.

  • measurement range up to 180 km/h
  • input: pulse, analogue (4 ... 20 mA) or radio transmission
  • 4 ... 20 mA analogue output
  • supply voltage: 24 V DC
  • ambient temperature -20 ... +70 °C
  • units adjustable: km/h, mph, m/s
  • protection class: IP65
  • alarm relay
  • data logger
Flow Meter PCE-UFM 65CU
US$ 2,145.00
ex. VAT, ex. delivery costs
Our Flow Meter enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 59 and 67 mm. The Flow Meter of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

  • flow rate: 0.03 ... 5 m/s
  • accuracy: ±2 % of Rd
  • resolution: 0.01 m/s
  • repeatability: 0.2 %
  • display of the volume flow
  • for copper pipes
  • pipe size: DN65 (59 ... 67 mm)
Flow Meter PCE-UFM 65PVC
US$ 2,145.00
ex. VAT, ex. delivery costs
Our Flow Meter enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 72 and 80 mm. The Flow Meter of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

  • flow rate: 0.03 ... 5 m/s
  • accuracy: ±2 % of Rd
  • resolution: 0.01 m/s
  • repeatability: 0.2 %
  • display of the volume flow
  • for PVC pipes
  • pipe size: DN65 (72 ... 80 mm)
Heat Pump Test Equipment PCE-UFM 65CU
US$ 2,145.00
ex. VAT, ex. delivery costs
Our Heat Pump Test Equipment enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 59 and 67 mm. The Heat Pump Test Equipment of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

  • flow rate: 0.03 ... 5 m/s
  • accuracy: ±2 % of Rd
  • resolution: 0.01 m/s
  • repeatability: 0.2 %
  • display of the volume flow
  • for copper pipes
  • pipe size: DN65 (59 ... 67 mm)
Heat Pump Test Equipment PCE-UFM 65PVC
US$ 2,145.00
ex. VAT, ex. delivery costs
Our Heat Pump Test Equipment enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 72 and 80 mm. The Heat Pump Test Equipment of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

  • flow rate: 0.03 ... 5 m/s
  • accuracy: ±2 % of Rd
  • resolution: 0.01 m/s
  • repeatability: 0.2 %
  • display of the volume flow
  • for PVC pipes
  • pipe size: DN65 (72 ... 80 mm)
HVAC Meter / HVACR Tester PCE-UFM 65CU
US$ 2,145.00
ex. VAT, ex. delivery costs
Our HVAC Meter / HVACR Tester enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 59 and 67 mm. The HVAC Meter / HVACR Tester of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

  • flow rate: 0.03 ... 5 m/s
  • accuracy: ±2 % of Rd
  • resolution: 0.01 m/s
  • repeatability: 0.2 %
  • display of the volume flow
  • for copper pipes
  • pipe size: DN65 (59 ... 67 mm)
HVAC Meter / HVACR Tester PCE-UFM 65PVC
US$ 2,145.00
ex. VAT, ex. delivery costs
Our HVAC Meter / HVACR Tester enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 72 and 80 mm. The HVAC Meter / HVACR Tester of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

  • flow rate: 0.03 ... 5 m/s
  • accuracy: ±2 % of Rd
  • resolution: 0.01 m/s
  • repeatability: 0.2 %
  • display of the volume flow
  • for PVC pipes
  • pipe size: DN65 (72 ... 80 mm)
HVAC Meter PCE-TDS 75
US$ 2,145.00
ex. VAT, ex. delivery costs
The ultrasonic HVAC meter is a fixed installation meter. The flow rate of liquids in pipes can be determined with this HVAC meter. The sensors from the ultrasonic HVAC meter can be mounted directly on the pipes to be measured without having to cut them open. The flow velocity is calculated using the transit-time principle which requires the solid impurities be less than 5% for accuracy.

  • Measuring range: ± 0.03 … ± 5 m / s
  • Measuring accuracy: ± 1% of the measured value
  • Pipe diameter: 25 … 1200 mm (1 … 48 in)
  • Interface: RS232 & RS485
  • Relay output
IoT Sensor PCE-CT 100N
US$ 2,145.00
ex. VAT, ex. delivery costs
Wireless
The IoT sensor works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the IoT sensor are used for the non-destructive testing of materials.

  • Measuring range: 0 … 1250 µm
  • Accuracy: ± (1% + 1 µm)
  • Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
  • Measurement data storage for up to 500 data
  • Data transfer via wifi and USB
  • Two different probes for NFe and Fe (included)
Material Thickness Meter PCE-CT 100N
US$ 2,145.00
ex. VAT, ex. delivery costs
Wireless
The material thickness meter works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the material thickness meter are used for the non-destructive testing of materials.

  • Measuring range: 0 … 1250 µm
  • Accuracy: ± (1% + 1 µm)
  • Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
  • Measurement data storage for up to 500 data
  • Data transfer via wifi and USB
  • Two different probes for NFe and Fe (included)
Milliohmmeter/Micro-Ohmmeter PCE-MO 2010
US$ 2,145.00
ex. VAT, ex. delivery costs
The milliohmmeter with seven selectable measuring ranges from 0 µΩ to 200 Ω, a maximum resolution of 0.1 µΩ and a maximum test current of 10 A offers a wide range of applications. Thanks to the 4-wire measuring method, the micro-ohmmeter guarantees accurate measurements at the lowest resistances without the influence of the lead resistance.

  • Measuring range 0 µΩ … 200 Ω
  • Resolution: 0.1 µΩ
  • Accuracy: 1 %
  • Test current: 10 A, 1 A, 100 mA, 10 mA
  • Memory for 200 measured values
  • Software with data export
Milliohmmeter/Micro-Ohmmeter PCE-MO 2010
US$ 2,145.00
ex. VAT, ex. delivery costs
The milliohmmeter with seven selectable measuring ranges from 0 µΩ to 200 Ω, a maximum resolution of 0.1 µΩ and a maximum test current of 10 A offers a wide range of applications. Thanks to the 4-wire measuring method, the micro-ohmmeter guarantees accurate measurements at the lowest resistances without the influence of the lead resistance.

  • Measuring range 0 µΩ … 200 Ω
  • Resolution: 0.1 µΩ
  • Accuracy: 1 %
  • Test current: 10 A, 1 A, 100 mA, 10 mA
  • Memory for 200 measured values
  • Software with data export
NDT Test Instruments PCE-CT 100N
US$ 2,145.00
ex. VAT, ex. delivery costs
Wireless
The coating thickness automotive tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the automotive tester are used for the non-destructive testing of materials.

  • Measuring range: 0 … 1250 µm
  • Accuracy: ± (1% + 1 µm)
  • Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
  • Measurement data storage for up to 500 data
  • Data transfer via wifi and USB
  • Two different probes for NFe and Fe (included)
NDT Tester - Surface Tester PCE-CT 100N
US$ 2,145.00
ex. VAT, ex. delivery costs
Wireless
The NDT tester - surface tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the surface tester are used for the non-destructive testing of materials.

  • Measuring range: 0 … 1250 µm
  • Accuracy: ± (1% + 1 µm)
  • Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
  • Measurement data storage for up to 500 data
  • Data transfer via wifi and USB
  • Two different probes for NFe and Fe (included)