The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces.

• Probe is 50 Newtons / 11.2 lbf force, 10 and 98 N probes are options
• Tests HRC, HRB, HV, HB, MPa
• Memory function via SD card and included PC software
• Large color LCD display with back lighting

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces.

• 50 Newtons UCI probe / 11.2 lbf force, 10 and 98 N probes are options
• Tests HRC, HRB, HV, HB, MPa
• Memory function via SD card and included PC software
• Large color LCD display with back lighting

The Ultrasonic Contact Impedance (UCI) Metal Hardness Tester PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces.

• Probe is 50 Newtons / 11.2 lbf force, 10 and 98 N probes are options
• Tests HRC, HRB, HV, HB, MPa
• Memory function via SD card and included PC software
• Large color LCD display with back lighting

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces.

• Probe is 50 Newtons / 11.2 lbf force, 10 and 98 N probes are options
• Tests HRC, HRB, HV, HB, MPa
• Memory function via SD card and included PC software
• Large color LCD display with back lighting

The Ultrasonic Contact Impedance (UCI) Metal Hardness Tester PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces.

• Probe is 50 Newtons / 11.2 lbf force, 10 and 98 N probes are options
• Tests HRC, HRB, HV, HB, MPa
• Memory function via SD card and included PC software
• Large color LCD display with back lighting

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces.

• Probe is 50 Newtons / 11.2 lbf force, 10 and 98 N probes are options
• Tests HRC, HRB, HV, HB, MPa
• Memory function via SD card and included PC software
• Large color LCD display with back lighting

The Ultrasonic testing device has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces.

• Probe is 50 Newtons / 11.2 lbf force, 10 and 98 N probes are options
• Tests HRC, HRB, HV, HB, MPa
• Memory function via SD card and included PC software
• Large color LCD display with back lighting

The Ultrasonic Contact Impedance (UCI) condition monitoring material tester has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces.

• Probe is 50 Newtons / 11.2 lbf force, 10 and 98 N probes are options
• Tests HRC, HRB, HV, HB, MPa
• Memory function via SD card and included PC software
• Large color LCD display with back lighting

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.

• Probe is 10 Newtons / 2.2 lbf force, 50 and 98 N probes are options
• Tests HRC, HRB, HV, HB, MPa
• Memory function via SD card and included PC software
• Large color LCD display with back lighting

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.

• Probe is 98 Newtons / 22 lbf force, 10 and 50 N probes are options
• Tests HRC, HRB, HV, HB, MPa
• Memory function via SD card and included PC software
• Large color LCD display with back lighting

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.

• Probe is 98 Newtons / 22 lbf force, 10 and 50 N probes are options
• Tests HRC, HRB, HV, HB, MPa
• Memory function via SD card and included PC software
• Large color LCD display with back lighting

The Ultrasonic Contact Impedance (UCI) Metal Hardness Tester PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.

• Probe is 10 Newtons / 2.2 lbf force, 50 and 98 N probes are options
• Tests HRC, HRB, HV, HB, MPa
• Memory function via SD card and included PC software
• Large color LCD display with back lighting

The Ultrasonic Contact Impedance (UCI) Metal Hardness Tester PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.

• Probe is 98 Newtons / 22 lbf force, 10 and 50 N probes are options
• Tests HRC, HRB, HV, HB, MPa
• Memory function via SD card and included PC software
• Large color LCD display with back lighting

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.

• 10 Newtons UCI probe / 2.2 lbf force, 50 and 98 N probes are options
• Tests HRC, HRB, HV, HB, MPa
• Memory function via SD card and included PC software
• Large color LCD display with back lighting

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.

• 98 Newtons UCI probe / 22 lbf force, 10 and 50 N probes are options
• Tests HRC, HRB, HV, HB, MPa
• Memory function via SD card and included PC software
• Large color LCD display with back lighting

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.

• Probe is 10 Newtons / 2.2 lbf force, 50 and 98 N probes are options
• Tests HRC, HRB, HV, HB, MPa
• Memory function via SD card and included PC software
• Large color LCD display with back lighting

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.

• Probe is 10 Newtons / 2.2 lbf force, 50 and 98 N probes are options
• Tests HRC, HRB, HV, HB, MPa
• Memory function via SD card and included PC software
• Large color LCD display with back lighting 

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.

• Probe is 98 Newtons / 22 lbf force, 10 and 50 N probes are options
• Tests HRC, HRB, HV, HB, MPa
• Memory function via SD card and included PC software
• Large color LCD display with back lighting 

The Ultrasonic testing device has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.

• Probe is 10 Newtons / 2.2 lbf force, 50 and 98 N probes are options
• Tests HRC, HRB, HV, HB, MPa
• Memory function via SD card and included PC software
• Large color LCD display with back lighting 

The Ultrasonic testing device has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.

• Probe is 98 Newtons / 22 lbf force, 10 and 50 N probes are options
• Tests HRC, HRB, HV, HB, MPa
• Memory function via SD card and included PC software
• Large color LCD display with back lighting