Products for 'PCE-DRW 2' | PCE Instruments

Closing Force Measuring Device BIA Class 2 for bus doors

US$ 895.00

ex. VAT, ex. delivery costs

The original BIA class 2 is a mechanical closing force measuring device for bus doors. The elaborate design combines precision with practical robustness and ensures accurate measured values even after years of use in harsh environments.

Measuring range and sensor must be selected!
Stiffness: 10 N/mm or 25 N/mm depends on the sensor selection
Accuracy: +/- 10 N or 5% of reading
Measuring principle: slave pointer
Precise measurements
Easy to use
Standards and directives: 2001 85 EC
incl. ISO calibration certificate

CO2 Analyser PCE-WMM 100

US$ 1,055.00

ex. VAT, ex. delivery costs

The CO2 analyser PCE-WMM 100 consists of a main unit and a remote display. The CO2 analyser PCE-WMM 100 is used to measure carbon dioxide and oxygen in a fixed location. The CO2 analyser PCE-WMM 100 has two relays that can be used to control alarm lights or sounders.

Measuring range CO2: 0 … 50000 ppm
Measuring range O2: 0 … 30 %
Measuring range temperature: 0 … 50 °C / 32 … 122 °F
Main and remote unit
Alarm relay
4 … 20 mA analog outputs
Acoustic alarm

Airflow Meter PCE-WS US2

US$ 999.00

ex. VAT, ex. delivery costs

Airflow Meter with RS485 communication for measuring wind speed and direction outdoors. The Airflow Meter offers RS485 Modbus RTU bus communication and is therefore compatible with the latest industrial communication protocols.

measurement range: 0 ... 160 km/h
accuracy: ±0.5 km/h (0 ... 15 km/h); 3% (15 ... 120 km/h)
5 m cable with 4-pin M12 connection
RS485 Modbus RTU communication
measurement of wind speed and direction
protection class IP65 for outdoor areas

Flow Meter PCE-WS US2

US$ 999.00

ex. VAT, ex. delivery costs

Flow Meter with RS485 communication for measuring wind speed and direction outdoors. The Flow Meter offers RS485 Modbus RTU bus communication and is therefore compatible with the latest industrial communication protocols.

measurement range: 0 ... 160 km/h
accuracy: ±0.5 km/h (0 ... 15 km/h); 3% (15 ... 120 km/h)
5 m cable with 4-pin M12 connection
RS485 Modbus RTU communication
measurement of wind speed and direction
protection class IP65 for outdoor areas

Wind Measurer PCE-WS US2

US$ 999.00

ex. VAT, ex. delivery costs

Wind Measurer with RS485 communication for measuring wind speed and direction outdoors. The Wind Measurer offers RS485 Modbus RTU bus communication and is therefore compatible with the latest industrial communication protocols.

measurement range: 0 ... 160 km/h
accuracy: ±0.5 km/h (0 ... 15 km/h); 3% (15 ... 120 km/h)
5 m cable with 4-pin M12 connection
RS485 Modbus RTU communication
measurement of wind speed and direction
protection class IP65 for outdoor areas

Wind Sensor PCE-WS US2

US$ 999.00

ex. VAT, ex. delivery costs

Wind Sensor with RS485 communication for measuring wind speed and direction outdoors. The Wind Sensor offers RS485 Modbus RTU bus communication and is therefore compatible with the latest industrial communication protocols.

measurement range: 0 ... 160 km/h
accuracy: ±0.5 km/h (0 ... 15 km/h); 3% (15 ... 120 km/h)
5 m cable with 4-pin M12 connection
RS485 Modbus RTU communication
measurement of wind speed and direction
protection class IP65 for outdoor areas

CO2 Analyzer PCE-AQD 20

US$ 1,026.00

ex. VAT, ex. delivery costs

The CO2 analyzer PCE-AQD 20 is an ideal measuring device for monitoring the air quality at workplaces. The PCE-AQD 20 health and CO2 analyzer is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function

PM2.5
Humidity
Temperature
CO2
Air pressure
Memory: SD card max. 32 GB
Ideal for workplace monitoring
Alarm function

Ultrasonic Flow Meter PCE-WS US2

US$ 999.00

ex. VAT, ex. delivery costs

Ultrasonic Flow Meter with RS485 communication for measuring wind speed and direction outdoors. The Ultrasonic Flow Meter offers RS485 Modbus RTU bus communication and is therefore compatible with the latest industrial communication protocols.

measurement range: 0 ... 160 km/h
accuracy: ±0.5 km/h (0 ... 15 km/h); 3% (15 ... 120 km/h)
5 m cable with 4-pin M12 connection
RS485 Modbus RTU communication
measurement of wind speed and direction
protection class IP65 for outdoor areas

Wind Speed Meter PCE-WS US2

US$ 999.00

ex. VAT, ex. delivery costs

Wind Speed Meter with RS485 communication for measuring wind speed and direction outdoors. The Wind Speed Meter offers RS485 Modbus RTU bus communication and is therefore compatible with the latest industrial communication protocols.

measurement range: 0 ... 160 km/h
accuracy: ±0.5 km/h (0 ... 15 km/h); 3% (15 ... 120 km/h)
5 m cable with 4-pin M12 connection
RS485 Modbus RTU communication
measurement of wind speed and direction
protection class IP65 for outdoor areas

Force Gage PCE-HFG 2.5K-E100

US$ 1,034.00

ex. VAT, ex. delivery costs

A Force Gage is based on the principle that the force acting on the pressure adapter is measured hydraulically. The hydraulic pressure generated is displayed by the Force Gage on a scale in Newtons.

Measuring range: 0… 2,500 N / 562 lbs
Resolution: 100 N / 22.5 lbs
Measuring accuracy: ±1.95% f. R.
with 100 cm hydraulic hose
External analogue display

Hydraulic Force Gauges PCE-HFG 2.5K-E100

US$ 1,034.00

ex. VAT, ex. delivery costs

A hydraulic force gauges is based on the principle that the force acting on the pressure adapter is measured hydraulically. The hydraulic pressure generated is displayed by the hydraulic force gauges on a scale in Newtons.

Measuring range: 0… 2,500 N / 562 lbs
Resolution: 100 N / 22.5 lbs
Measuring accuracy: ±1.95% f. R.
with 100 cm hydraulic hose
External analogue display

Tension Dynamometer PCE-HFG 2.5K-E100

US$ 1,034.00

ex. VAT, ex. delivery costs

A tension dynamometer is based on the principle that the force acting on the pressure adapter is measured hydraulically. The hydraulic pressure generated is displayed by the tension dynamometer on a scale in Newtons.

Measuring range: 0… 2,500 N / 562 lbs
Resolution: 100 N / 22.5 lbs
Measuring accuracy: ±1.95% f. R.
with 100 cm hydraulic hose
External analogue display

Force Gage PCE-HFG 2.5K-ICA Incl. ISO Calibration Certificate

US$ 1,029.00

ex. VAT, ex. delivery costs

A Force Gage is based on the principle that the force acting on the pressure adapter is measured hydraulically. The hydraulic pressure generated is displayed by the Force Gage on a scale in Newtons.

Measuring range: 0… 2,500 N / 562 lbs
Resolution: 100 N / 22.5 lbs
Measuring accuracy: ±1.95% f. R.
Incl. ISO calibration certificate

Hydraulic Force Gauges PCE-HFG 2.5K-ICA Incl. ISO Calibration Certificate

US$ 1,029.00

ex. VAT, ex. delivery costs

Measuring range: 0… 2,500 N / 562 lbs
Resolution: 100 N / 22.5 lbs
Measuring accuracy: ±1.95% f. R.
Incl. ISO calibration certificate

Anemometer / Anemometers for all applications PCE-WS US2

US$ 999.00

ex. VAT, ex. delivery costs

Anemometer / Anemometers for all applications with RS485 communication for measuring wind speed and direction outdoors. The Anemometer / Anemometers for all applications offers RS485 Modbus RTU bus communication and is therefore compatible with the latest industrial communication protocols.

measurement range: 0 ... 160 km/h
accuracy: ±0.5 km/h (0 ... 15 km/h); 3% (15 ... 120 km/h)
5 m cable with 4-pin M12 connection
RS485 Modbus RTU communication
measurement of wind speed and direction
protection class IP65 for outdoor areas

CO2 Data Logger / Room Climate Data Logger PCE-AQD 20

US$ 1,026.00

ex. VAT, ex. delivery costs

The CO2 data logger / room climate data logger PCE-AQD 20 is an ideal measuring device for monitoring the air quality at workplaces. The health and CO2 data logger is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function

PM2.5
Humidity
Temperature
CO2
Air pressure
Memory: SD card max. 32 GB
Ideal for workplace monitoring
Alarm function

Material Thickness Meter PCE-TG 150 F2.5-ICA incl. ISO Calibration Certificate

US$ 945.00

ex. VAT, ex. delivery costs

The material thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the material thickness meter.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
Probe temperature range: -10 … 60 °C / 14 … 140 °F
incl. ISO Calibration Certificate

NDT Test Instruments - Thickness Meter PCE-TG 150 F2.5-ICA incl. Certificate

US$ 945.00

ex. VAT, ex. delivery costs

The NDT tester - thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the NDT tester - thickness meter.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
Probe temperature range: -10 … 60 °C / 14 … 140 °F

Paint Thickness Tester PCE-TG 150 F2.5-ICA incl. ISO Calibration Certificate

US$ 945.00

ex. VAT, ex. delivery costs

The paint thickness tester can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the paint thickness tester.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
Probe temperature range: -10 … 60 °C / 14 … 140 °F
incl. ISO Calibration Certificate

Thickness Gauge PCE-TG 150 F2.5-ICA incl. ISO Calibration Certificate

US$ 945.00

ex. VAT, ex. delivery costs

The thickness gauge can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the thickness gauge.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
Probe temperature range: -10 … 60 °C / 14 … 140 °F
incl. ISO Calibration Certificate

Thickness Meter PCE-TG 150 F2.5-ICA incl. ISO Calibration Certificate

US$ 945.00

ex. VAT, ex. delivery costs

The thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the thickness meter.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
Probe temperature range: -10 … 60 °C / 14 … 140 °F
incl. ISO Calibration Certificate

Ultrasonic testing device PCE-TG 150 F2.5-ICA incl. ISO Calibration Certificat

US$ 945.00

ex. VAT, ex. delivery costs

The Ultrasonic testing device can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the Ultrasonic testing device.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
Probe temperature range: -10 … 60 °C / 14 … 140 °F
incl. ISO Calibration Certificate

Ultrasonic Thickness Tester PCE-TG 150 F2.5-ICA incl. ISO Calibration Certificat

US$ 945.00

ex. VAT, ex. delivery costs

The ultrasonic thickness tester can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the ultrasonic thickness tester.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
Probe temperature range: -10 … 60 °C / 14 … 140 °F
incl. ISO Calibration Certificate

Ultrasonic Wall Thickness Gauges PCE-TG 150 F2.5-ICA incl. ISO Calibration Certificate

US$ 945.00

ex. VAT, ex. delivery costs

The ultrasonic wall thickness gauges can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the ultrasonic wall thickness gauges.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
Probe temperature range: -10 … 60 °C / 14 … 140 °F
ICA incl. ISO Calibration Certificate

Wall Thickness Gauge PCE-TG 150 F2.5-ICA incl. ISO Calibration Certificate

US$ 945.00

ex. VAT, ex. delivery costs

The wall thickness gauge can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the wall thickness gauge.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
Probe temperature range: -10 … 60 °C / 14 … 140 °F
ICA incl. ISO Calibration Certificate

Condition Monitoring Material Thickness Meter PCE-TG 150 F2.5-ICA Certificate

US$ 945.00

ex. VAT, ex. delivery costs

The condition monitoring material thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the condition monitoring material thickness meter.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
Probe temperature range: -10 … 60 °C / 14 … 140 °F
incl. ISO Calibration Certificate

Force Gauge PCE-HFG 2.5K-E100

US$ 1,034.00

ex. VAT, ex. delivery costs

A force gauge is based on the principle that the force acting on the pressure adapter is measured hydraulically. The hydraulic pressure generated is displayed by the force gauge on a scale in Newtons.

Measuring range: 0… 2,500 N / 562 lbs
Resolution: 100 N / 22.5 lbs
Measuring accuracy: ±1.95% f. R.
with 100 cm hydraulic hose
External analogue display

Tension Dynamometer PCE-HFG 2.5K-ICA Incl. ISO Calibration Certificate

US$ 1,029.00

ex. VAT, ex. delivery costs

Measuring range: 0… 2,500 N / 562 lbs
Resolution: 100 N / 22.5 lbs
Measuring accuracy: ±1.95% f. R.
Incl. ISO calibration certificate

Class I Sound Level Meter Calibrator PCE-SC 09-ICA incl. ISO Calibration Cert.

US$ 932.00

ex. VAT, ex. delivery costs

The Class I Sound Level Meter Calibrator is a battery powered sound source. With the Class I sound level meter calibrator, direct and fast calibrations of sound level meters and other systems for noise measurement can be carried out.

Sound pressure level: 94 dB, 114 dB
Accuracy class: IEC 942, class 1
Accuracy sound level: ± 0.3 dB (20°C / 68°C, 760 mm / 30 in Hg)
Frequency: 1000 Hz for A, B, C and D frequency weighting
incl. ISO Calibration Certificate

HVAC Meter PCE-TG 150 F2.5-ICA incl. ISO Calibration Certificate

US$ 945.00

ex. VAT, ex. delivery costs

The HVAC meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the HVAC meter.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
Probe temperature range: -10 … 60 °C / 14 … 140 °F
incl. ISO Calibration Certificate

Paint Thickness Gauge PCE-TG 150 F2.5-ICA incl. ISO Calibration Certificate

US$ 945.00

ex. VAT, ex. delivery costs

The paint thickness gauge can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the paint thickness gauge.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
Probe temperature range: -10 … 60 °C / 14 … 140 °F
incl. ISO Calibration Certificate

Force Gauge PCE-HFG 2.5K-ICA Incl. ISO Calibration Certificate

US$ 1,029.00

ex. VAT, ex. delivery costs

Measuring range: 0… 2,500 N / 562 lbs
Resolution: 100 N / 22.5 lbs
Measuring accuracy: ±1.95% f. R.
Incl. ISO calibration certificate

Class I Acoustic Calibrator PCE-SC 09-ICA incl. ISO Calibration Certificate

US$ 932.00

ex. VAT, ex. delivery costs

The Class I Acoustic Calibrator is a battery powered sound source. With the Class I acoustic calibrator, direct and fast calibrations of sound level meters and other systems for noise measurement can be carried out.

Sound pressure level: 94 dB, 114 dB
Accuracy class: IEC 942, class 1
Accuracy sound level: ± 0.3 dB (20°C / 68°C, 760 mm / 30 in Hg)
Frequency: 1000 Hz for A, B, C and D frequency weighting
incl. ISO Calibration Certificate

Class I Decibel Meter Calibrator PCE-SC 09-ICA incl. ISO Calibration Certificate

US$ 932.00

ex. VAT, ex. delivery costs

The Class I Decibel Meter Calibrator is a battery powered sound source. With the Class I decibel meter calibrator, direct and fast calibrations of sound level meters and other systems for noise measurement can be carried out.

Sound pressure level: 94 dB, 114 dB
Accuracy class: IEC 942, class 1
Accuracy sound level: ± 0.3 dB (20°C / 68°C, 760 mm / 30 in Hg)
Frequency: 1000 Hz for A, B, C and D frequency weighting
incl. ISO Calibration Certificate

Sound Level Meter / Noise Level Meter PCE-ISM 10ILEQ

US$ 913.00

ex. VAT, ex. delivery costs

Our Sound Level Meter / Noise Level Meter is specially designed to precisely detect and measure short, pulse-like noises such as explosions, blows or bangs. The Sound Level Meter / Noise Level Meter records sound levels within a range from 20 to 130 dB, with three manual measurement ranges available.

measurement range: 20 ... 130 dB
resolution: 0.1 dB
accuracy: ±1.5 dB
measurement functions: HOLD, MAX, LEQ
time weighting: F, S and I
frequency weighting: A, C and Z
frequency range: 20 ... 8000 Hz
standards: IEC 61672-1 (class II)

Class I Sound Level Calibrator PCE-SC 09-ICA incl. ISO Calibration Cert.

US$ 932.00

ex. VAT, ex. delivery costs

The Class I Sound Level Calibrator is a battery powered sound source. With the Class I sound level calibrator, direct and fast calibrations of sound level meters and other systems for noise measurement can be carried out.

Sound pressure level: 94 dB, 114 dB
Accuracy class: IEC 942, class 1
Accuracy sound level: ± 0.3 dB (20°C / 68°C, 760 mm / 30 in Hg)
Frequency: 1000 Hz for A, B, C and D frequency weighting
incl. ISO Calibration Certificate