The solar measuring device kit is a useful tool to examine solar cells for their characteristic curves. This enables a statement to be made about the composition and design of a photovoltaic system.

Solar measuring device PCE-PVA 100

• Measuring range: 0 … 12 A DC
• Three different test functions
• PC interface for data transferSolar measuring device PCE-SPM 1
• Measuring range: 0 … 2000 W/m²
• Resolution: 1 W/m²
• Accuracy: ± 10 W/m² or ± 5%
• Data memory: 32,000 measured values
• Application, e.g .: photovoltaic systems

The  IoT meter has an adjustable measuring range of 0… 600 V AC/DC and can therefore measure a wide variety of voltages. For example, it is possible to connect the IoT meter to the supply line in order to monitor the applied voltage.

• Measuring range 0 … 600 V AC/DC
• Active and passive output signal
• Display and keypad for configuration
• Frequency measurement
• DIN rail mounting
• Display

The current signal converter has an adjustable measuring range of 0… 600 V AC/DC and can therefore measure a wide variety of voltages. For example, it is possible to connect the transmitter to the supply line in order to monitor the applied voltage.

• Measuring range 0 … 600 V AC/DC
• Active and passive output signal
• Display and keypad for configuration
• Frequency measurement
• DIN rail mounting
• Display

The current signal transducer has an adjustable measuring range of 0… 600 V AC/DC and can therefore measure a wide variety of voltages. For example, it is possible to connect the transmitter to the supply line in order to monitor the applied voltage.

• Measuring range 0 … 600 V AC/DC
• Active and passive output signal
• Display and keypad for configuration
• Frequency measurement
• DIN rail mounting
• Display

The DIN-rail measuring instrument has an adjustable measuring range of 0… 600 V AC/DC and can therefore measure a wide variety of voltages. For example, it is possible to connect the transmitter to the supply line in order to monitor the applied voltage.

• Measuring range 0 … 600 V AC/DC
• Active and passive output signal
• Display and keypad for configuration
• Frequency measurement
• DIN rail mounting
• Display

The universal signal converter has an adjustable measuring range of 0… 600 V AC/DC and can therefore measure a wide variety of voltages. For example, it is possible to connect the transmitter to the supply line in order to monitor the applied voltage.

• Measuring range 0 … 600 V AC/DC
• Active and passive output signal
• Display and keypad for configuration
• Frequency measurement
• DIN rail mounting
• Display

The voltage signal converter has an adjustable measuring range of 0… 600 V AC/DC and can therefore measure a wide variety of voltages. For example, it is possible to connect the transmitter to the supply line in order to monitor the applied voltage.

• Measuring range 0 … 600 V AC/DC
• Active and passive output signal
• Display and keypad for configuration
• Frequency measurement
• DIN rail mounting
• Display

The voltage signal converter has an adjustable measuring range of 0… 600 V AC/DC and can therefore measure a wide variety of voltages. For example, it is possible to connect the transmitter to the supply line in order to monitor the applied voltage.

• Measuring range 0 … 600 V AC/DC
• Active and passive output signal
• Display and keypad for configuration
• Frequency measurement
• DIN rail mounting
• Display

• Power: 10 W
• Two fan speeds
• Operating time: 6 ... 10 h
• Solar panel 12 W
• for camping and outdoor activities

The BIA-1 BT closing force transducer is a wireless, electronic closing force measuring device for rail vehicle and bus doors and sliding steps. The closing force transducer is a further development of the tried and tested closing force measuring device Original BIA Class 1.

• Measuring range: 25 … 310 N
• Stiffness: 10 N/mm
• Accuracy: +/- 3N or 3% of reading
• PC evaluation software PinchPilot
• Force Meter App (downloadable from Google Play Store)
• Wireless

• ISO calibration certificate

The closing force measuring device is a wireless, electronic measuring device for rail vehicle doors and sliding steps. The closing force measuring device is a further development of the tried and tested BIA 600 measuring device.

• Measuring range: 0 … 700 N
• Accuracy: +/- 3 N (0-100 N), +/- 3 % (>100 N)
• User guidance and evaluation according to EN 14752:2015,   EN 14752:2005 (optional)
• Interface: Bluetooth
• App downloadable from Google Play Store
• incl. ISO calibration certificate

The closing force measuring device is an electronic measuring device for power-operated windows, sliding roofs and doors in the automotive sector and for sliding steps in the rail vehicle sector.

• Measuring range: 0 … 600 N
• Accuracy: +/- 3N (0-100N) +/- 3% (>100N)
• PC evaluation software PinchPilot
• Memory for 100 measurements
• Applicable standards – 2000/4/EC or user defined
• incl. ISO calibration certificate

The photovoltaic meter kit is a useful tool to examine solar cells for their characteristic curves. This enables a statement to be made about the composition and design of a photovoltaic system.

Photovoltaic meter PCE-PVA 100

• Measuring range: 0 … 12 A DC
• Three different test functions
• PC interface for data transferSolar measuring device PCE-SPM 1
• Measuring range: 0 … 2000 W/m²
• Resolution: 1 W/m²
• Accuracy: ± 10 W/m² or ± 5%
• Data memory: 32,000 measured values
• Application, e.g .: photovoltaic systems

The Photovoltaic Tester kit is a useful tool to examine solar cells for their characteristic curves. This enables a statement to be made about the composition and design of a photovoltaic system.

Photovoltaic Tester PCE-PVA 100

• Measuring range: 0 … 12 A DC
• Three different test functions
• PC interface for data transferSolar measuring device PCE-SPM 1
• Measuring range: 0 … 2000 W/m²
• Resolution: 1 W/m²
• Accuracy: ± 10 W/m² or ± 5%
• Data memory: 32,000 measured values
• Application, e.g .: photovoltaic systems

The environmental tester kit is a useful tool to examine solar cells for their characteristic curves. This enables a statement to be made about the composition and design of a photovoltaic system.

Environmental tester PCE-PVA 100

• Measuring range: 0 … 12 A DC
• Three different test functions
• PC interface for data transferEnvironmental tester PCE-SPM 1
• Measuring range: 0 … 2000 W/m²
• Resolution: 1 W/m²
• Accuracy: ± 10 W/m² or ± 5%
• Data memory: 32,000 measured values
• Application, e.g .: photovoltaic systems

The radiation detector kit is a useful tool to examine solar cells for their characteristic curves. This enables a statement to be made about the composition and design of a photovoltaic system.

Radiation detector PCE-PVA 100

• Measuring range: 0 … 12 A DC
• Three different test functions
• PC interface for data transferRadiation detector PCE-SPM 1
• Measuring range: 0 … 2000 W/m²
• Resolution: 1 W/m²
• Accuracy: ± 10 W/m² or ± 5%
• Data memory: 32,000 measured values
• Application, e.g .: photovoltaic systems

The environmental meter kit is a useful tool to examine solar cells for their characteristic curves. This enables a statement to be made about the composition and design of a photovoltaic system.

Environmental meter PCE-PVA 100

• Measuring range: 0 … 12 A DC
• Three different test functions
• PC interface for data transferEnvironmental meter PCE-SPM 1
• Measuring range: 0 … 2000 W/m²
• Resolution: 1 W/m²
• Accuracy: ± 10 W/m² or ± 5%
• Data memory: 32,000 measured values
• Application, e.g .: photovoltaic systems

The radioactivity meter kit is a useful tool to examine solar cells for their characteristic curves. This enables a statement to be made about the composition and design of a photovoltaic system.

Environmental meter PCE-PVA 100

• Measuring range: 0 … 12 A DC
• Three different test functions
• PC interface for data transferEnvironmental meter PCE-SPM 1
• Measuring range: 0 … 2000 W/m²
• Resolution: 1 W/m²
• Accuracy: ± 10 W/m² or ± 5%
• Data memory: 32,000 measured values
• Application, e.g .: photovoltaic systems

The closing force measuring device is an electronic measuring device for rail vehicle doors. The elaborate design combines precision with practical robustness and ensures accurate measured values even after years of use in harsh environments.

• Measuring range: 0 … 700 N
• Accuracy: +/- 3N (0-100N), +/- 3% (>100N)
• Professional PC software PinchPilot
• Precise measurements
• Robust design
• Applicable standards DIN EN 14752:2015, DIN EN 14752:2005 (optional)
• LabView
• incl. ISO calibration certificate

The closing force transducer is an electronic closing force measuring device for power-operated windows in the motor vehicle sector. Typical areas of application are testing and production in the automotive industry.

• Measuring range: 0 … 150 N
• Spring stiffness: 10 N/mm
• Accuracy: +/- 3N (0-100N) or +/- 3% (>100N)
• Memory for 100 measurements
• Cable length: 1.5 m / 4.9 ft
• Lithium polymer battery
• Support of relevant standards - 2000/4 EG
• incl. ISO calibration certificate

The force transducer is an electronic closing force measuring device for power-operated windows, sunroofs and tailgates in the motor vehicle sector. Typical areas of application are testing and production in the automotive industry.

• Measuring range: up to 200 N
• Stiffness: 10 N/mm
• Accuracy: +/- 3N or 3% of reading
• PC evaluation software PinchPilot
• Memory for 100 measurements
• Sensor and PC interface
• incl. ISO calibration certificate

The force transducer is an electronic closing force measuring device for power-operated windows, sunroofs and tailgates in the motor vehicle sector. Typical areas of application are testing and production in the automotive industry.

• Measuring range: up to 300 N
• Stiffness: 20 N/mm
• Accuracy: +/- 3N or 3% of reading
• PC evaluation software PinchPilot
• Memory for 100 measurements
• Sensor and PC interface

The force transducer is an electronic closing force measuring device for power-operated windows, sunroofs and tailgates in the motor vehicle sector. Typical areas of application are testing and production in the automotive industry.

• Measuring range: up to 300 N
• Stiffness: 65 N/mm
• Accuracy: +/- 3N or 3% of reading
• PC evaluation software PinchPilot
• Memory for 100 measurements

The closing force measuring device is an electronic measuring device for sliding roofs, automatic window regulators and tailgates in the automotive sector. Typical areas of application are manufacturing, development and production tests in the automotive industry.

• Measuring range: 0 … 200 N
• Spring stiffness: 2 N/mm, 10%
• Accuracy: +/- 3 N (0-100 N) or +/- 3 % (> 100 N)
• Memory for 100 measurements
• Sensor and PC interface
• Standards – 2000/4 EG, US Standard FMVSS 118, ECE-R 21
• incl. ISO calibration certificate

The closing force measuring device is a wireless, electronic measuring device for externally powered doors and gates. Typical use is the final inspection of new systems as well as regular inspections.

• Measuring range: 0 … 2000 N
• Stiffness: 500 N/mm
• Accuracy: +/- 3N or 3% of reading
• Wireless
• App Force Meter available for download
• PC evaluation software PinchPilot

The original BIA class 1 closing force measuring device is an electronic closing force measuring device for rail vehicle and bus doors and sliding steps. The elaborate design combines precision with practical robustness and ensures accurate measured values even after years of use in harsh environments.

• Measuring range: 25 … 310 N
• Stiffness: 10 N/mm
• Accuracy: +/- 3N or 3% of reading
• Memory for 100 measurements
• Sensor and PC interface
• Applicable standards: EN 14752:2005, VDV 111, VDV 157, 2001/85/EG
• incl. evaluation software PinchPilot
• incl. display unit SEB2
• incl. ISO calibration certificate