Zum Hauptinhalt springen
Material Tester PCE-3000
US$ 4,492.00
ex. VAT, ex. delivery costs
The Material Tester enables precise and versatile hardness measurements in various scales. The Material Tester is easy to operate and stores up to 150 measured values.

  • Measuring ranges: HV 20 ... 999, HRC 15 ... 80
  • Measuring ranges: HB 20 ... 999, HRB 20 ... 120
  • Resolution: 1 (HV, HB) 0.1 (HRC, HRB)
  • Accuracy: ±3 % (HV, HB), ±1.5 (HRC, HRB)
  • Measuring directions: 360°
  • TFT colour display
  • Memory for 150 measured values
  • Averaging: 3, 5, 10 measurements
  • Result display with tolerance evaluation
  • UCI calibration
  • Test standard ASTM A1038
  • Includes 50 N probe
Material Tester LM-FC240
US$ 4,470.00
ex. VAT, ex. delivery costs
Wireless
The Material Tester is a convenient measuring instrument with color display and external probe for measuring the ferrite content in austenitic and duplex steels in accordance with the Basel standard DIN EN ISO 8249 using the magnetic induction method. The Material Tester has a completely newly developed digital probe technology enables particularly stable measurement results thanks to the high sampling rate. For absolutely interference-free and precise measurement, the signals are already digitized in the probe, which leads to extremely accurate and reproducible results.

  • Ferrite content
  • Measuring range: 0.2 ... 140 FN
  • Resolution: 0.01 FN
  • Special probe for ferrite testing
  • Measuring range: 0.2 - 100 Fe%, 0.2 - 140 FN
  • Measuring method: Single measurement or scan
  • Smallest measuring area: ø 2 mm
  • Display: LCD touch panel color 320x480 pixels
  • Measured value memory: 10,000 measured values
  • Wireless interface: Android, iOS and Windows
  • According to Basel standard DIN EN ISO 8249
Material Tester PCE-TWT 50
US$ 4,170.00
ex. VAT, ex. delivery costs
The Material Tester is a high-precision testing device for calibrating and checking the function of torque spanners in industrial and technical applications. Developed for professional use, the Material Tester enables the reliable measurement of torques of up to 50 Nm / 37 ft-lb and is therefore ideal for use in the automotive industry, mechanical engineering and research and development.

  • Torque: 0 ... 50 Nm 0 ... 37 ft-lb
  • Resolution: 0.001 Nm / 0.0007 ft-lb
  • Accuracy: ±1 % v.Mw.
  • Continuous measurement or peak value
  • Units: Nm, kgf cm and lbf in
  • RS232 interface
  • 99 memory locations
  • Software
Material Tester LM-FL250-HM1
US$ 4,155.00
ex. VAT, ex. delivery costs
The compact List-Magnetik FLUX-CHECK 250 Material Tester is a new handheld measuring device for determining the magnetic flux Phi of a magnet system or individual magnet. This innovative Material Tester offers a precise method for ferromagnetic material testing and is ideal for material analysis and material testing in various applications.

  • Magnetic flux: 0 ... 250 mVs
  • Resolution: 0.001 mVs - Accuracy: 2%
  • Helmholtz moment coil HM-1
  • Graphical integral of the impulse curve
  • Real flux, magnetic moment, flux density
  • Memory and interface
  • No drift
  • LCD touch panel
  • Wireless interface
Material Tester LM-FL250-HM2
US$ 4,155.00
ex. VAT, ex. delivery costs
The compact List-Magnetik FLUX-CHECK 250 Material Tester is a new handheld measuring device for determining the magnetic flux Phi of a magnet system or individual magnet. This innovative Material Tester offers a precise method for ferromagnetic material testing and is ideal for material analysis and material testing in various applications.

  • Magnetic flux: 0 ... 250 mVs
  • Resolution: 0.001 mVs - Accuracy: 2%
  • Helmholtz torque coil HM-2
  • Graphical integral of the impulse curve
  • Real flux, magnetic moment, flux density
  • Memory and interface
  • No drift
  • LCD touch panel
  • Wireless interface
Material Tester PCE-RT 2300-ICA Incl. ISO Calibration Certificate
US$ 4,140.00
ex. VAT, ex. delivery costs
ISO Calibration
The material tester PCE-RT 2300 is used to measure the roughness of surfaces. The PCE-RT 2300 material tester has a detachable motorized sensor that allows the material tester to determine the surface roughness even on small or narrow profiles. Free software download for remote test control and data save to Windows PC and memory for 100 records of internal data.

  • Large measuring range:  Rz: 0.02 μm … 320 μm; Ra, Rq: 0.005 μm … 32 μm
  • Accuracy of ± 10% and repeat accuracy of ± 6%
  • Touchscreen configuration and Android/printer bluetooth connectivity 
  • Sensor has diamond test head with 90-degree cone angle
  • Optional sensors and extension rod for small holes and curved surfaces 
Material Tester PCE-UFD 50
US$ 4,125.00
ex. VAT, ex. delivery costs
The material tester is used for non-destructive material testing. With adjustable frequencies between 0.5 ... 20 MHz and sound velocities between 1000 ... 15000 m/s, measurements can be carried out in steel in the range between 0 ... 10000 mm. DAC and AVG evaluation methods, display and probe delay, attenuation and amplification functions, export and report generation functions as well as numerous other setting options make non-destructive material testing with the material tester considerably easier.

  • Test range: 0 ... 10000 mm
  • Pulse shift: -20 ... +3400 µs
  • Single or dual probe measurement
  • AVG and DAC evaluation methods
  • Speed of sound 1000 ... 15000 m/s
  • USB interface and software
  • Memory for up to 100 data records