The Video Fiberscope is the ideal tool for professional, technical, maintenance and development. The Video Fiberscope also allows you to visualize the interior of installations and machinery without the need to disassemble them, to take pictures and video clips of the parts to check and to in the Video Fiberscope and then transfer them to your PC.

• 1 m / 3ft 3" camera cable with front camera
• 1 m / 3ft 3" camera cable with 90° side camera
• Diameter camera head: Ø 3.9 mm / 0.15"
• Interface: Mini-USB 1.1 and AV out/in
• Memory: 8 GB SD memory card (incl.)
• Cable length: 1 m / 3ft 3"

The WiFi surface testing - inspection camera can be connected to a tablet or smartphone using the Android or iOS app. The WiFi surface testing - inspection camera impresses with its simple handling and its robust construction. With the flexible, metal braided borescope cable, examinations under adverse operating conditions are possible with the WiFi surface testing - inspection camera.

• Cable length: 1000 mm / 3ft 3"
• Movable camera head Ø 4.5 mm
• Image transmission via wifi
• For iOS and Android
• Camera resolution / image sensor: 1024 x 768 Px

• Layer thickness: 2 ... 1000 µm
• smallest resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 px)
• Data storage
• USB and wireless
• Spring-loaded measuring probe for small parts and complex surfaces

• Layer thickness: FE: 2 ... 5000 µm
• Coating thickness: NF: 2 ... 2000 µm
• Resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 pixels)
• Data storage
• USB and wireless
• Dual probe with sliding sleeve and prism, swiveling

The Surface Testing Roughness Tester PCE-RT 10 is a small, light device with simple navigation. Despite the fact that the device functions on a very complex and elaborate level, the measurement results can be acquired quickly and in an accurate way. Very simple to operate with a motorized diamond sensor.

• Measures Ra in Metric (µm) and Imperial (µinch)
• Ra 0.05 to 10um / 2 µinch … 400 µinch measurement range
• Rz 0.1 to 50um / 3.93 µinch … 1968.50 µinch measurement range
• Induction method with Diamond sensor
• Accuracy < ± 10% and Repeatability < 6%
• With threshold function
• Uses 4 AA Batteries (Included)

• Layer thickness: 2 ... 1000 µm
• smallest resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 px)
• Data storage
• USB and wireless
• Rod-shaped transversal probe for small indoor spaces

• Layer thickness: 2 ... 6000 µm
• smallest resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 pixels)
• Data storage
• USB and wireless
• Rod-shaped transversal probe for interiors and pipes

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60°. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.

• Measurement geometry: 60° degree angle
• Measuring range: 0 … 1000 GU
• Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
• Light source: D65
• Wave length: 400-700 nm

The PCE-SGM 60 surface tester and gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This meter allows you to measure very high gloss surfaces above 70 gloss units (GU).

• Measurement geometry: 60° degree angle
• Measurement up to 1000 gloss units
• Internal reading memory up to 5000 readings
• 3.5" TFT display
• Light source: D65
• Wave length: 400-700 nm