Query results | PCE Instruments

US$ 1,059.00

ex. VAT, ex. delivery costs

The level indicator is the ideal measuring device to determine the filling level of a silo. Thanks to the 4 … 20 mA output signal, the level indicator can also be connected to the operational process control.

Measuring range: 0 … 10 m / 0 … 32.8 ft
Accuracy: 0.5%
Resolution: 0.001 m
With display for setting and reading
Stable M60 connection thread
incl. external digital display PCE-N24S:
Voltage supply: selectable
Input signal: selectable
Display: 4 digits, red
Digit height: 20 mm / 0.78"

Indicator PCE-N50F

US$ 1,038.00

ex. VAT, ex. delivery costs

The indicator is suitable for panel mounting. This indicator can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the indicator.

Signal input range: 0 … 20 mV
Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
For load cells, force sensors, etc.
Up to 1600 Hz sampling rate
LCD display

Level Indicator PCE-ULM 10

US$ 834.00

ex. VAT, ex. delivery costs

The level indicator is the ideal measuring device to determine the fill level of a silo. Thanks to the 4 … 20-mA output signal, the level indicator can also be connected to the operational process control.

Measuring range: 0 … 10 m / 0 … 32.8 ft
Accuracy: 0.5%
Resolution: 0.001 m
With display for setting and reading
Stable M60 connection thread

Indicator PCE-N45F

US$ 760.00

ex. VAT, ex. delivery costs

The indicator is used to realize individual weighing solutions. The indicator can be used to connect load cells, force sensors, weighing platforms and other sensors that use strain gauges.

Signal input range: 0 … 10 mV / 0 … 15 mV
Supply voltage of the measuring cell: 5V
Power supply: 24V DC
Relay output
Potential-free digital input
Interface and analog output

Panel Indicator PCE-N50B

US$ 148.00

ex. VAT, ex. delivery costs

The panel indicator has a RS485 Modbus interface. This digital Modbus panel indicator can display the measured data of up to 10 slave devices or registers.

Interface: RS 485 Modbus RTU Master
Number of slave devices / registers: 10
Baud rate individually adjustable
Further power supply area

Panel Indicator PCE-N24T

US$ 123.00

ex. VAT, ex. delivery costs

The panel indicator PCE-N24T is used for processing signals coming from temperature sensors. Depending on your specific needs, the digital indicator can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the digital indicator is freely scalable, which increases its application possibilities.

Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: PT100, Thermoelement Type J / K (selectable)
Display: 4 digits, red
Digit height: 20 mm

Power Indicator PCE-N24S

US$ 115.00

ex. VAT, ex. delivery costs

The power indicator is used for the signal processing of 4 .. 20 mA. The power indicator has a 5-digit LED display to allow the user to read the directly measured current values.

Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
Display: 4 digits, red
Digit height: 20 mm

Voltage Indicator PCE-N24H

US$ 111.00

ex. VAT, ex. delivery costs

The digital voltage indicator is is used to show DC voltage parameters. The voltage indicator can measure and display direct current, direct voltage. The possibility of freely scaling the input signal allows a very versatile use of this voltage indicator.

Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: ±100 V DC, ±250 V DC, ± 400 V DC, 1 A DC, 5 A DC (selectable)
Display: 4 digits, red
Digit height: 20 mm / 0.78"Note: This item must be configured before ordering!