Our motorized force test stand can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The motorized force test stand lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized force test stand offers the operator the most precise equality of test bench and sample.

• Force range: max. 5000 N / 500 kg / 1100 lbs
• Travel: max. 300 mm / 11.8"
• Feed speed: 30 … 230 mm/min / 1.18 … 9.05 in/min
• Manual or automatic procedure
• incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"
• incl. software
• incl. force gauge PCE-DFG N 5K (0 … 5000 N)
• ** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

The Test Stand measures both tensile forces and compressive forces and this with a very high resolution. The tensile force and the compressive force are often determined in the test laboratory, e.g. to determine the yield point, the tear-off force, the force required to operate a button or switch. The supplied motorized test stand can be coupled and operated in various versions with our Test Stands.

Dynamometer PCE-DFG N 5K

• Measuring range: 0 … 5000 N / 500 kg / 1100 lbs
• Resolution: 1N / 0.22 lbs
• Accuracy: ± 0.1% of the measuring range
• Memory for 100 measurements
• USB interface
• Graphic displayTest Stand PCE-MTS500
• Force range: max. 5000 N / 500 kg / 1100 lbs
• Travel path: max. 300 mm / 11.8"
• Feed speed: 30 mm/min … 230 mm/min / 1.18 … 9.05 in/min

• torque: 0.1 ... 2000 Nm
• accuracy: ±1 % of Rd
• real-time curve
• display of the direction of rotation
• units Nm, kgf cm, lbf in
• USB interface
• adjustable limit values
• peak hold
• 7-inch touchscreen

• torque: 0.01 ... 500 Nm
• accuracy: ±1 % of Rd
• real-time curve
• display of the direction of rotation
• units Nm, kgf cm, lbf in
• USB interface
• adjustable limit values
• peak hold
• 7-inch touchscreen

With the PCE-DLT 10 test stand, the water vapour resistance of samples is tested according to AMK-MB-005 Issued on 04/2015 Humidity and Climatic Resistance Test Module 1 (water vapour loading).

• Steam test according to AMK-MB-05
• Max. 5 test specimens
• Automatic test sequence with constant temperature
• Data logger
• Determination of moisture expansion
• Checking of joint formation and edge release

• torque: 0.01 ... 100 Nm
• accuracy: ±1 % of Rd
• real-time curve
• display of the direction of rotation
• units Nm, kgf cm, lbf in
• USB interface
• adjustable limit values
• peak hold
• 7-inch touchscreen

• Torque: 0 ... 500 Nm
• Resolution: 0.01 Nm
• Accuracy: ±1 % v.Mw.
• Continuous measurement or peak value
• Units: Nm, kgf cm and lbf in
• RS232 interface
• 99 memory locations
• Software

• measurement range: 0 ... 500 N
• resolution: 0.1 N
• accuracy: ±0.05 % FS
• sampling rate: 2 ... 100 Hz
• traverse speed: 100 mm/min, 300 mm/min
• traverse distance: 150 mm 
• Measurable edge thickness: 0.4...3.5 mm
• Measurable board thickness: 10...64 mm
• graphical display
• data logger