US$ 2,145.00
ex. VAT, ex. delivery costs
The Wind Measurer PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the Wind Measurer means stormy gusts can also be monitored.
The Wind Measurer PCE-WSAC 50W 230-ICA is useful for measuring the wind speed to help determine the preferred site for a wind turbine installation. The device also monitors the wind load on existing wind farms, as well as on cranes for safety purposes. Due to the integrated 4 … 20-mA analogue output of the Wind Measurer, the measured data can also be transferred to other controllers for evaluation.
The air flow meter PCE-WSAC 50W 24-ICA is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. Due to the integrated 4 … 20-mA analogue output of the air flowmeter, the measured data can also be transferred to other controllers for evaluation.
The wind measurer has a measuring range of up to 0 … 30 m/s. In addition to the velocity, the wind measurer can precisely measure the volume flow and temperature. The compact design of the sensors, in combination with the extendable telescopic probe, enable measurements to be taken even in places that are particularly difficult to access.
The wind measurer measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the wind measurer can measure the volume flow and the ambient temperature.
The wind measurer measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the wind measurer can measure the volume flow and the ambient temperature.
The Wind Measurer is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form. With heating.
The Wind Measurer is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form. With heating.
The Wind Measurer is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form.
The multifunction wind measurer determines the wind speed via an impeller with a diameter of 65 mm. The wind measurer can reliably determine the speed in a measuring range of 0.3 … 45.0 m/s.
The Wind Measurer is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form.
PCE-WSAC 50 is a wind measurer alarm controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This wind measurer alarm controller allows measurement of the slightest of wind movements. PCE-WSAC 50 is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.
The PCE-HVAC 2 is a multifunction wind measurer with a pitot tube that measures air velocities up to 80 m/s. It is possible to measure air speed, air pressure, air flow, differential pressure and ambient temperature with this mobile wind measurer. Readings can be taken in narrow pipes and other restricted spaces because the pitot tube can be inserted in very small gaps.-
The PCE-VA 20-SET is a multi-functional wind measurer including flow hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) installations. This multi-faceted anemometer-thermometer-hygrometer incorporates a 10 cm / 3.9" diam. fan impeller, easy-to-view backlit LCD, and useful functions, e.g. display hold, average val, maximum val, minimum val, auto power-off, low battery indication, and imperial/metric option.
This airwheel wind measurer is very economical. With this airwheel wind measurer you can measure wind speed and air temperature.
PCE-VA 20-SET is a multifunction wind measurer with capture hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) systems. This combined hygrometer-anemometer-thermometer possesses a 10 cm / 3.9" diameter fan impeller and a bright backlit LCD. The functions of the wind measuring device incorporate display hold, mean value, max value, min value, battery-saving auto shutdown, low-battery display, and a choice between metric and imperial units.
Airwheel wind measurer with port, memory, software for wind speed, temperature and air flow. These test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.
The Wind Measurer PCE-VA 11 is a useful and versatile device for measuring air speeds, air temperature and infrared temperature. Thanks to the fast response time of the device, real-time measurement is possible without problems. The large display provides an accurate overview of the measured values.
PCE-HVAC 2 is a high-velocity multifunction wind measurer or anemometer with a pitot tube. This portable wind measurer can be used to determine air speed, air pressure, air flow, differential pressure and ambient temperature. The pitot tube allows access through tiny openings to take measurements in small pipe systems and other confined spaces.-
The PCE-VA 20 is a versatile multifunction wind measurer for determining environmental conditions such as wind, temperature and humidity. It is additionally used to test heating, ventilation and air conditioning / cooling (HVAC) systems. This triple thermometer-hygrometer-anemometer device has a 10 cm / 3.9" Ø fan impeller and a clear backlit LCD. Available functions include display hold, average / maximum / minimum value, auto shutdown, low-battery warning, and metric / imperial choice.
PCE-VA 20 is a multifunction wind measurer for assessing wind, weather, indoor / outdoor environmental climate conditions as well as for testing heating, ventilation and air conditioning or cooling (HVAC) systems. This combination anemometer-hygrometer-thermometer features a 10 cm / 3.9" Ø fan impeller, easy-to-read backlit LCD, and functions such as display hold, average value, maximum value, minimum value, battery-saving automatic power off, low-battery indicator, and metric or imperial unit selection.
Without a doubt, the main advantage of this handheld cup vane wind measurer is that it doesn't need to be held exactly in the direction of the wind. Wind measurer with impellers typically have to be held exactly in the direction of the air flow to take accurate measurements. Digital cup vane wind measurer, wind direction will not influence the measurement.
Wind measurer with 4 … 20 mA output. Wind measurer for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.
