Gas Detector PCE-AQD 20-ICA Incl. ISO Calibration Certificate
US$ 1,135.00
ex. VAT, ex. delivery costs
ISO Calibration
The gas detector PCE-AQD 20 is an ideal measuring device for monitoring the air quality at workplaces. The health and gas detector is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function
  • PM2.5
  • Humidity
  • Temperature
  • CO2
  • Air pressure
  • Memory: SD card max. 32 GB
  • Ideal for workplace monitoring
  • Alarm function
  • Incl. ISO calibration certificate
Gas Detector PCE-WMM 100-ICA incl. ISO Calibration Certificate
US$ 1,196.00
ex. VAT, ex. delivery costs
ISO Calibration

The gas detector PCE-WMM 100-ICA consists of a main unit and a remote display. The CO2 gas detector is used to measure carbon dioxide and oxygen in a fixed location. The gas detector has two relays that can be used to control alarm lights or sounders.

  • Measuring range CO2: 0 … 50000 ppm
  • Measuring range O2: 0 … 30 %
  • Measuring range temperature: 0 … 50 °C / 32 … 122 °F
  • Main and remote unit
  • Alarm relay
  • 4 … 20 mA analog outputs
  • Acoustic alarm
  • incl. ISO Calibration Certificate

Gas Detector PCE-LDC 20
US$ 6,851.00
ex. VAT, ex. delivery costs
The gas detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

  • Units: bar, psi, MPa, l/min, m³/h, cfm
  • Leak detection in compressed air, refrigerant  and gas systems
  • Leakage assessment
  • Various attachments
  • Wireless headphones
  • Frequency: 38 . .. 42 kHz
  • Measurement rate: 1 Hz
  • Memory capacity: 1 GB
Gas Detector PCE-WMM 50-ICA incl. ISO Calibration Certificate
US$ 785.00
ex. VAT, ex. delivery costs
ISO Calibration

PCE-WMM 50-ICA is a wall-mounted gas detector that uses diffusion to monitor carbon dioxide (CO2) gas levels and ambient temperature (ºC / ºF) indoors. This indoor air quality meter features an alarm-activated potential-free contact that can, for example, activate a fan to reduce CO2 gas concentration in the room.


  • CO2 gas measurement range: 0 … 50,000 ppm
  • Temperature measurement range: 0 … +45 ºC / +32 … +113 ºF
  • IP54-rated enclosure on sensor and remote display units
  • 2 adjustable alarm thresholds
  • 3- to 4-digit remote display (depends on range)
  • incl. ISO Calibration Certificate

Gas Detector PCE-AQD 10-ICA incl. ISO Calibration Certificate
US$ 748.00
ex. VAT, ex. delivery costs
ISO Calibration
The gas detector is used to measure air quality. The gas detector measures carbon dioxide, temperature and humidity. The CO2 sensor of the gas detector is disconnected from the main unit with a connection cable.

  • Measuring range: 0 … 4000 ppm
  • Measuring range: 10 … 90% RH
  • Measuring range: 0 … 50 °C / 32 … 122 °F
  • Memory on SD card
  • 3 parameters of air quality
  • CO2, air temperature and humidity
  • incl. ISO Calibration Certificate (for CO2 only)
Gas Detector PCE-CMM 10-ICA incl. ISO Calibration Certificate
US$ 478.00
ex. VAT, ex. delivery costs
ISO Calibration

The Gas Detector PCE-CMM 10-ICA is a multi-function meter for measuring the air quality. This gas detector measures synchronously the CO2 concentration, the air temperature and the humidity.

  • Measuring range CO2: 400 … 5000 ppm
  • Measuring range temperature: -10.0 … 50.0°C / 14 … 122°F
  • Measuring range humidity: 0 … 99% rh
  • Battery operation
  • Limit exceeded
  • Beep
  • incl. ISO Calibration Certificate (for CO2 only)

Gas Detector PCE-CMM 8-ICA incl. ISO Calibration Certificate
US$ 404.00
ex. VAT, ex. delivery costs
ISO Calibration

With the gas detector you can ensure the right climate in your office. The gas detector measures the CO2 content of the air, the relative humidity and the room temperature. The gas detector shows carbon dioxide concentrations up to 9999 ppm, temperatures from -10… 50 °C, and relative humidity values from 20… 95%.

  • Large CO2 measuring range up to 9999 ppm
  • Traffic light function for carbon dioxide
  • Measures temperature and humidity
  • Network operation
  • Suitable for classrooms, offices, lecture halls
  • incl. ISO Calibration Certificate (for CO2 only)

Gas Detector PCE-CMM 5-ICA incl. ISO Calibration Certificate
US$ 396.00
ex. VAT, ex. delivery costs
ISO Calibration
The gas detector measures the CO2 content in the air and shows the measured value on a large LCD display. The CO2 content in the air is an important measure for checking the ventilation behavior in offices, classrooms, lecture halls, etc.

  • Temperature measuring range: -10 … 50 ° C
  • Large CO2 measuring range up to 5000 ppm
  • Traffic light function for carbon dioxide
  • Measures humidity
  • 5 h graph for long-term monitoring
  • Battery and mains operation
  • Suitable for classrooms, nurseries/kindergartens, lecture halls
  • incl. ISO calibration certificate (for CO2 only)
Gas Detector / Gas Detection Instrument PCE-AQD 50A-ICA incl. ISO-Calibration Certificate
US$ 660.00
ex. VAT, ex. delivery costs
ISO Calibration
The Gas Detector / Gas Detection Instrument is specially designed for long-term monitoring of climatic conditions in, for example, offices, classrooms or lecture halls. The Gas Detector / Gas Detection Instrument is equipped with various sensors.
Parameters / Measuring ranges:

  • Temperature: 0 ... +50 ºC / 32 ... 122 ºF
  • Ambient humidity: 0 ... 100% RH
  • Atmospheric pressure: 300 ... 2000 hPa
  • CO2: 0 ... 40000 ppm
  • 32 GB data storage
  • E-paper display with histogram display
  • Good / medium / bad rating
  • Battery life: approx. 10 months
  • incl. ISO-Calibration Certificate