Products for 'Pinza amperimétrica PCE PCM 1 '

US$ 139.00

ex. VAT, ex. delivery costs

Two counters / tri-color digital display / 2 alarm relays / freely scalable / 2 control inputs / optional analog output and RS-485 / front 65 IP.

2 internal counters
Front IP 65
3 colour indication display
2 alarm outputs

Panel Meter PCE-G1

US$ 1,452.00

ex. VAT, ex. delivery costs

The panel meter is intended for stationary measurement of relative humidity and temperature and direct display on a large display. This panel meter consists of an LED display (100 mm high) and is protected according to IP 54.

Temperature measuring range: 0 … +60 °C (Celsius only)
Humidity measuring range: 10 … 95 % RH
Up to 50 m (164 ft) reading distance
External sensor (wired)

Panel Meter PCE-G1A

US$ 1,460.00

ex. VAT, ex. delivery costs

The Panel meter is a measuring device for stationary measurement of relative humidity and temperature. This panel meter consists of an LED seven-segment display with a digit height of 100 mm, which enables you to read it very well even at a distance of up to 50 m.

Temperature measuring range: 0 … +60 °C (Celsius only)
Humidity measuring range: 10 … 95 % RH
Up to 50 m (164 ft) reading distance
External sensor (wired)
Voltage supply: 230 V AC
with analogue output 4 … 20 mA

Panel Meter PCE-DMM 60

US$ 1,293.00

ex. VAT, ex. delivery costs

The panel meter is a precision instrument of the highest standards. The panel meter is specifically designed for process monitoring and calibration. This panel meter is distinguished by its modular concept. This means that the actual sensor and the display can be separated. The pressure transmitter can be selected on site for different measuring ranges and connected to the display without tools.

Max. 400 bar / 5801 psi
Media: water, gases
Pressure type: Absolute / Relative
Diaphragm: stainless steel
Accuracy: 0.05

Panel Meter PCE-DPD-F1

US$ 434.00

ex. VAT, ex. delivery costs

The built-in display is used to indicate the force and weight, which is detected by force sensors and load cells with strain gauges. The output signal of the measuring cell is irrelevant because the panel meter makes it possible to display the correct weight in mV / V based on the set sensitivity. The panel meter shows the measured values on a 6-digit LED display.

Power supply: 85 … 265V AC / DC
Input signal: mV / V for force and weighing sensors
Display: 6 digits, red
Digit height : 14 mm

Panel Meter PCE-ND30

US$ 600.00

ex. VAT, ex. delivery costs

The panel meter can be used to measure 54 parameters in a UI network. In addition to the performance measurement of the panel meter, it can detect voltage, current, and harmonics up to the 51st order. The panel meter can be used as 1 or 3 phase. It does not matter if the connected load is balanced or unbalanced.

- Measurement of all parameters of a U/I network
- Harmonics measurement up to 51st order
- 2 x PT100 Input Optional
- RS485 Modbus

Note: This item must be configured before ordering!

Panel Meter PCE-BPD-U-41A

US$ 1,521.00

ex. VAT, ex. delivery costs

The panel meter is designed in such a way that the measured values displayed can be read from a large distance. With a digit height of 60 mm or 100 mm (2.3" or 3.9"), the reading distance for panel meter is 25 m or 50 m (82 ft or 164 ft).

Function: convert analog signal into usable value
Input signal: 4 … 20 mA, ±20 mA DC, 0 … 10 V DC, ±10 V DC
Display range: -1999 … 9999
Digit height: 100 mm / 3.9"
Number of outputs: 2
Voltage supply: 85 … 265 V AC / 120 … 370 V DC

Panel Meter PCE-BPD-U-41D

US$ 1,521.00

ex. VAT, ex. delivery costs

Function: convert analog signal into usable value
Input signal: 4 … 20 mA, ±20 mA DC, 0 … 10 V DC, ±10 V DC
Display range: -1999 … 9999
Digit height: 100 mm / 3.9"
Number of outputs: 2
Voltage supply: 11 … 36 V DC

Panel Meter PCE-N50F

US$ 913.00

ex. VAT, ex. delivery costs

The panel meter is suitable for panel mounting. This panel meter can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the panel meter.

Signal input range: 0 … 20 mV
Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
For load cells, force sensors, etc.
Up to 1600 Hz sampling rate
LCD display