Query results | PCE Instruments

US$ 2,583.00

ex. VAT, ex. delivery costs

Our Heat Pump Test Equipment offers reliable temperature measurement within a range from -20 °C to 550 °C (-4 °F to 1022 °F). The infrared images are displayed with a resolution of 384 x 288 pixels on the 3.5 inch colour display. The Heat Pump Test Equipment saves more than 40,000 images in the internal 6 GB memory in JPG format.

measurement range: -20 ... 550 °C
infrared image resolution: 384 x 288 pixels
frame rate: 25 Hz
wavelength range: 8 ... 14 µm
emissivity: 0.01 ... 1

Heat Pump Test Equipment PCE-UFM 80CU

US$ 2,293.00

ex. VAT, ex. delivery costs

Our Heat Pump Test Equipment enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 72 and 80 mm. The Heat Pump Test Equipment of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN80 (72 ... 80 mm)

Heat Pump Test Equipment PCE-UFM 80PVC

US$ 2,293.00

ex. VAT, ex. delivery costs

Our Heat Pump Test Equipment enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 83 and 91 mm. The Heat Pump Test Equipment of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN80 (83 ... 91 mm)

Ultrasonic Leak Detector PCE-LDC 8

US$ 2,151.00

ex. VAT, ex. delivery costs

The Ultrasonic Leak Detector is used to locate leaks on compressed air lines. Furthermore, the Ultrasonic Leak Detector can also be used on coolant lines or gas lines for leak detection.

Measuring principle: ultrasound
Measuring principle: air, coolant, non-explosive gases
Working frequency of 40 kHz
up to 6 h battery operation
Leak detection via headphones and LCD display
Localize leaks up to 18m, 59 ft.

Heat Pump Test Equipment PCE-UFM 65CU

US$ 2,085.00

ex. VAT, ex. delivery costs

Our Heat Pump Test Equipment enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 59 and 67 mm. The Heat Pump Test Equipment of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN65 (59 ... 67 mm)

Heat Pump Test Equipment PCE-UFM 65PVC

US$ 2,085.00

ex. VAT, ex. delivery costs

Our Heat Pump Test Equipment enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 72 and 80 mm. The Heat Pump Test Equipment of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN65 (72 ... 80 mm)

Heat Pump Test Equipment PCE-UFM 50CU

US$ 1,959.00

ex. VAT, ex. delivery costs

Our Heat Pump Test Equipment enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 46 and 54 mm. The Heat Pump Test Equipment of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN50 (46 ... 54 mm)

Heat Pump Test Equipment PCE-UFM 50PVC

US$ 1,959.00

ex. VAT, ex. delivery costs

Our Heat Pump Test Equipment enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 59 and 67 mm. The Heat Pump Test Equipment of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN50 (59 ... 67 mm)

Heat Pump Test Equipment PCE-UFM 40CU

US$ 1,808.00

ex. VAT, ex. delivery costs

Our Heat Pump Test Equipment enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 35 and 43 mm. The Heat Pump Test Equipment of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN40 (35 ... 43 mm)

Heat Pump Test Equipment PCE-UFM 40PVC

US$ 1,808.00

ex. VAT, ex. delivery costs

Our Heat Pump Test Equipment enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 46 and 54 mm. The Heat Pump Test Equipment of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN40 (46 ... 54 mm)

Heat Pump Test Equipment PCE-UFM 32CU

US$ 1,703.00

ex. VAT, ex. delivery costs

Our Heat Pump Test Equipment enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 28 and 36 mm. The Heat Pump Test Equipment of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN32 (28 ... 36 mm)

Heat Pump Test Equipment PCE-UFM 32PVC

US$ 1,703.00

ex. VAT, ex. delivery costs

Our Heat Pump Test Equipment enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 35 and 43 mm. The Heat Pump Test Equipment of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN32 (35 ... 43 mm)

Heat Pump Test Equipment PCE-UFM 25CU

US$ 1,557.00

ex. VAT, ex. delivery costs

Our Heat Pump Test Equipment enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on copper pipes with a diameter between 21 and 29 mm. The Heat Pump Test Equipment of the PCE-UFM-CU series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for copper pipes
pipe size: DN25 (21 ... 29 mm)

Heat Pump Test Equipment PCE-UFM 25PVC

US$ 1,557.00

ex. VAT, ex. delivery costs

Our Heat Pump Test Equipment enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 28 and 36 mm. The Heat Pump Test Equipment of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN25 (28 ... 36 mm)

Heat Pump Tester PCE-RRU 10 Refrigerant Recovery Device for HVAC

US$ 1,557.00

ex. VAT, ex. delivery costs

The heat pump measuring device is ideal for all refrigeration system builders and technicians for the extraction of refrigerants. It can be used for refrigerants of classes A1, A2L, and A2. The compact heat pump measuring device is easily transportable with a handle and simple to operate. The powerful oil-free 2-piston compressor can generate pressures of up to 38.5 bar and achieve extraction rates of up to 9.5 kg/min, depending on the refrigerant.

Refrigerant Classes: A1, A2L, and A2
Refrigerants:R401C, R22, R401B, R134a, and more

Pressure up to 38.5 bar with overpressure protection
Oil-free 2-piston compressor
Brushless 1 HP motor
Extraction rate of up to 9.5 kg/min (R410A)
Large LCD display with backlight
Automatic cleaning function

Heat Pump Test Equipment PCE-UFM 20PVC

US$ 1,441.00

ex. VAT, ex. delivery costs

Our Heat Pump Test Equipment enables the measurement of flow velocity from 0.03 to 5 m/s. It can be used for measurements on PVC pipes with a diameter between 21 and 29 mm. The Heat Pump Test Equipment of the PCE-UFM-PVC series uses the ultrasonic transit time method to determine velocity and flow volume.

flow rate: 0.03 ... 5 m/s
accuracy: ±2 % of Rd
resolution: 0.01 m/s
repeatability: 0.2 %
display of the volume flow
for PVC pipes
pipe size: DN20 (21 ... 29 mm)

Heat Pump Test Equipment PCE-T 1220

US$ 1,050.00

ex. VAT, ex. delivery costs

Our Heat Pump Test Equipment for thermocouples enables the display and archiving of several temperature sensors simultaneously. Up to 8 different thermocouple types can be connected to the Heat Pump Test Equipment.

Measuring range: -200 ... 1800°C / -328 ... 3272°F
High accuracy: ± (0.04 % v.Mw. + 0.3 K) for type K
Thermocouple types: K, J, S, R, E, T, N, B
Memory for 10 million measured values
Alarm limits adjustable
12 input channels
PC software

Pyrometer PCE-895-ICA incl. ISO Calibration Certificate

US$ 1,026.00

ex. VAT, ex. delivery costs

The pyrometer is used for fast surface temperature measurement. The two laser points of the pyrometer PCE-895-ICA mark the exact measuring point and thus offer excellent assistance with the temperature measurement.

Temperature measurement up to 1600°C / 2912°F
Cross laser thermometer
K-Type or infrared measurement
Optical resolution: 60:1
Adjustable emissivity
Suitable for long-term measurements
Incl. ISO Calibration Certificate