Products for 'tc 1250 0.1' | PCE Instruments

£ 846.00

Price excl. VAT &. delivery

The Thickness Meter works with a measuring probe that only requires a small contact surface and low contact pressure. The Thickness Meter is barely larger than a measuring probe and is particularly suitable for measuring thin layers on uneven or complex surfaces, such as tin cans.

Measuring range: 2 ... 1000 µm
Resolution: 0.1 µm
for FE metals
Wireless interface for Windows, iOS and Android
OLED display
IP64 housing

Thickness Meter LM-TC-DUAL

£ 793.00

Price excl. VAT &. delivery

The Thickness Meter has a globally unique measuring probe that can be swiveled through 90°, allowing you to always carry out precise coating thickness measurements. The Thickness Meter with the compact, lightweight devices is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

Measuring range: 2 ... 5000 µm
Accuracy: 1 µm
FE / nFE metals
Wireless interface for Windows, iOS and Android
OLED display
Swiveling probe
IP54 housing

Thickness Meter LM-TC-FERRO

£ 704.00

Price excl. VAT &. delivery

The Thickness Meter has a globally unique measuring probe that can be swiveled through 90°, enabling precise coating thickness measurements at any time. Thanks to its compact design and low weight, the Thickness Meter is barely larger than a measuring probe and is therefore ideal for on-site applications in hard-to-reach places.

For FE metals
Wireless interface for Windows, iOS and Android
OLED display
IP54 housing

Thickness Meter PCE-CT 100N-ICA incl. ISO Calibration Certificate

£ 1,553.00

Price excl. VAT &. delivery

The coating thickness meter works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the coating thickness meter are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

Thickness Meter PCE-CT 100N

£ 1,447.00

Price excl. VAT &. delivery

The thickness meter works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the thickness meter are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via wifi and USB
Two different probes for NFe and Fe (included)

Thickness Meter PCE-CT 27FN-ICA incl. ISO Calibration Certificate

£ 500.00

Price excl. VAT &. delivery

PCE-CT 27FN is a Thickness Meter that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on metal substrates such as steel and aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.

Measuring range of 0 … 1250 µm / 0 … 50 mils
Accuracy of ±(2 % + 2 µm) / ±(2 % + 0.1 mils)
Features a resolution of 0.1 µ / 0.1 mils
incl. ISO Calibration Certificate

Thickness Meter PCE-CT 28-ICA incl. ISO Calibration Certificate

£ 570.00

Price excl. VAT &. delivery

The PCE-CT 28 Thickness Meter for cars is for measuring the thickness of paint and plastic on ferrous or non-ferrous materials without damaging the coating's surface. The thickness meter stands out due to its high range of measurement.

Measurement range: 0 … 1250 µm / 49.2 mils
Resolution: 0.1 µm / 0.004 mils (in a range of 0.0 µm … 99.9 µm / 3.9 mils) 1 µm / 0.04 mils (above the range)
Accuracy: ± 2% or 2.5 µm / 0.1 mils (highest reading is valid)
Display: LCD with 4 mm x 10 mm (0.2 in x 0.4 in) high digits
Incl. ISO Calibration Certificate

Thickness Meter PCE-CT 27FN

£ 398.00

Price excl. VAT &. delivery

Measuring range of 0 … 1250 µm / 0 … 50 mils
Accuracy of ±(2 % + 2 µm) / ±(2 % + 0.1 mils)
Features a resolution of 0.1 µ / 0.1 mils

Thickness Meter PCE-CT 28

£ 432.00

Price excl. VAT &. delivery

The PCE-CT 28 Thickness Meter for cars is for measuring the thickness of paint and plastic on ferrous or non-ferrous materials without damaging the coating's surface. The Thickness Meter stands out due to its high range of measurement.

Measurement range: 0 … 1250 µm / 49.2 mils
Resolution: 0.1 µm / 0.004 mils (in a range of 0.0 µm … 99.9 µm / 3.9 mils) 1 µm / 0.04 mils (above the range)
Accuracy: ± 2% or 2.5 µm / 0.1 mils (highest reading is valid)
Display: LCD with 4 mm x 10 mm (0.2 in x 0.4 in) high digits

Thickness Meter PCE-CT 26FN-ICA Incl. ISO Calibration Certificate

£ 322.00

Price excl. VAT &. delivery

The PCE-CT 26FN thickness meter can measure non-destructive coatings (paints, plastics …) on steel / iron and non-ferrous metals. The PCE-CT 26FN thickness meter is ideally suited to immediately detect, for example, accident damage to the vehicle.

Measuring range: 0 … 1250 μm / 0 … 49.2 mils
Resolution: 1 μm / 0.039 mils
Accuracy: ± (3% + 2 μm / 0.079 mils)
Wear-resistant sensor
V-groove for measurement on pipes
Incl. ISO calibration certificate

Thickness Meter PCE-CT 26FN

£ 183.00

Price excl. VAT &. delivery

Measuring range: 0 … 1250 μm / 0 … 49.2 mils
Resolution: 1 μm / 0.039 mils
Accuracy: ± (3% + 2 μm / 0.079 mils)
Wear-resistant sensor
V-groove for measurement on pipes

Thickness Meter PCE-TG 300-NO2-ICA incl. ISO calibration certificate

£ 1,100.00

Price excl. VAT &. delivery

The PCE-TG 300-NO2 is a thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the thickness meter.

Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
Diameter: 14 mm / 0.55"
Minimum diameter of pipes: 30 mm / 1.18"
Frequency: 2.5 MHz
Bluetooth
incl. ISO calibration certificate

Thickness Meter PCE-TG 300-NO7-ICA incl. ISO calibration certificate

£ 1,091.00

Price excl. VAT &. delivery

The PCE-TG 300-NO7 is a thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the thickness meter.

Measuring range: 0.65 … 200 mm / 0.025 … 7.87" (steel)
Diameter: 6 mm / 0.23"
Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
Frequency: 7 MHz
Bluetooth
incl. ISO calibration certificate

Thickness Meter PCE-TG 300-NO5-ICA incl. ISO calibration certificate

£ 1,064.00

Price excl. VAT &. delivery

The PCE-TG 300-NO5 is a thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the thickness meter.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth
incl. ISO calibration certificate

Thickness Meter PCE-TG 300-NO2

£ 997.00

Price excl. VAT &. delivery

Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
Diameter: 14 mm / 0.55"
Minimum diameter of pipes: 30 mm / 1.18"
Frequency: 2.5 MHz
Bluetooth

Thickness Meter PCE-TG 300-NO7

£ 988.00

Price excl. VAT &. delivery

Measuring range: 0.65 … 200 mm / 0.025 … 7.87" (steel)
Diameter: 6 mm / 0.23"
Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
Frequency: 7 MHz
Bluetooth

Thickness Meter PCE-TG 300-NO5

£ 962.00

Price excl. VAT &. delivery

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth

Thickness Meter PCE-TG 300-NO5/90

£ 944.00

Price excl. VAT &. delivery

The PCE-TG 300-NO5/90 is a thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the thickness meter.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth

Thickness Meter LM-MCDX-1F

£ 1,184.00

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Thickness Meter. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method allows using the Thickness Meter measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 1000 µm
smallest resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Spring-loaded measuring probe for small parts and complex surfaces

Thickness Meter LM-MCDX-52DP

£ 1,184.00

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Thickness Meter. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method for the Thickness Meter allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: FE: 2 ... 5000 µm
Coating thickness: NF: 2 ... 2000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
Dual probe with sliding sleeve and prism, swiveling

Thickness Meter PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate

£ 1,047.00

Price excl. VAT &. delivery

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth
incl. ISO calibration certificate

Thickness Meter LM-MCDX-1FT

£ 1,157.00

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Thickness Meter. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method for this Thickness Meter allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 1000 µm
smallest resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Rod-shaped transversal probe for small indoor spaces

Thickness Meter LM-MCDX-6FT

£ 1,157.00

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Thickness Meter. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method for this Thickness Meter allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 6000 µm
smallest resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
Rod-shaped transversal probe for interiors and pipes

Thickness Meter LM-MCDX-52D

£ 1,131.00

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Thickness Meter. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method for the Thickness Meter allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: FE: 2 ... 5000 µm
Coating thickness: NF: 2 ... 2000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
Dual probe with sliding sleeve and prism

Thickness Meter LM-MCDX-7F

£ 1,131.00

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Thickness Meter. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method of this Thickness Meter allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 7000 µm
smallest resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
FE probe for thick layers with sliding sleeve and prism

Thickness Meter LM-MCDX-5FP

£ 1,095.00

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Thickness Meter. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method for the Thickness Meter allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 5000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
Standard FE probe with sliding sleeve and prism, swiveling

Thickness Meter LM-MCDX-5F

£ 1,042.00

Price excl. VAT &. delivery

Numerous specialized digital probes can be connected to the Thickness Meter. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method using the Thickness Meter allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 5000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 px)
Data storage
USB and wireless
Standard FE probe with sliding sleeve and prism

Coating Thickness Meter PCE-CT 25FN-ICA incl. ISO Calibration Certificate

£ 272.00

Price excl. VAT &. delivery

The coating thickness meter is used for the quick and precise detection of layer thicknesses on metals. In comparison to many other thickness meters, this coating thickness meter does not have to differentiate between ferrous and non-ferrous metal.

Measuring range: 0 … 1500 µm
Minimum thickness: Fe: 0.3 mm, NFe: 0.05 mm
Measuring accuracy: ± (3% + 1 µm)

Resolution: 0.1 µm in the measuring range 0 … 100 µm 1 µm in the measuring range> 100 µm
incl. ISO Calibration Certificate

Coating Thickness Meter PCE-CT 25FN

£ 130.00

Price excl. VAT &. delivery

Measuring range: 0 … 1500 µm
Minimum thickness: Fe: 0.3 mm, NFe: 0.05 mm
Measuring accuracy: ± (3% + 1 µm)
Resolution: 0.1 µm in the measuring range 0 … 100 µm 1 µm in the measuring range> 100 µm

Thickness Meter PCE-CT 5

£ 41.00

Price excl. VAT &. delivery

The Thickness Meter is a measuring instrument for the rapid and non-destructive determination of coating thickness on ferrous and non-ferrous metals. The Thickness Meter automatically detects the base material and selects the appropriate measuring method, while measured values can be stored and transferred to a computer via USB-C.

Measuring range: 0 … 2000 µm
Resolution: 0.1 µm (0 … 99.9 µm), 1 µm (100 … 2000 µm)
Accuracy: ≤ ±(3% of reading + 2 µm)
Automatic base material detection
Automatic selection of measuring method
Measuring method: magnetic induction (Fe) / eddy current (NFe)
Units: µm, mm, mil
Internal memory for up to 30 measured values