PCE-VA 20-SET is a humidity detector with capture hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) systems. This combined hygrometer-anemometer-thermometer possesses a 10 cm / 3.9" diameter fan impeller and a bright backlit LCD. The functions of the device incorporate display hold, mean value, max value, min value, battery-saving auto shutdown, low-battery display, and a choice between metric and imperial units.
Measures air flow velocity, volume flow, relative humidity, air temperature, dew point temperature and wet-bulb temperature
Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of measured value + 0.3 m/s) when more than 20 m/s
Resolution: 0.1°C / 0.18°F
Includes 2 x capture hoods (1 x round 210 mm / 8.3 in Ø, 1 x square 346 x 346 mm / 13.6 x 13.6 in)
The humidity detector has a CO² measuring range of 0 … 9999 ppm. In addition to the carbon dioxide measurement, the humidity detector also has a carbon monoxide (CO) sensor with a measuring range of 0 … 1000 ppm and a temperature and humidity sensor.
The Humidity Sensor sensor is ideal for monitoring agricultural areas, gardens, green spaces or greenhouses. With the Humidity Sensor, soil moisture and soil temperature can be precisely recorded in order to optimize irrigation of plants or carry out scientific measurements.
The humidity sensor is used in HVAC technology to monitor humidity and temperature. The measured values are output by the humidity sensor as a standard signal 4 … 20 mA. Air humidity and temperature are precisely determined in this compact humidity sensor using a semiconductor component.
The humidity sensor is used in HVAC technology to monitor humidity and temperature. The measured values are output by the humidity sensor via the RS485 interface. In this compact humidity sensor, air humidity and temperature are precisely determined using a semiconductor component.
The humidity sensor is used in HVAC technology to monitor humidity and temperature. The measured values are output as a standard signal by the humidity sensor . Air humidity and temperature are accurately determined in this compact humidity sensor via a semiconductor component. For commissioning, the humidity probe is supplied with a DC voltage. The measured values are output via a two-wire cable.
The humidity sensor was developed and constructed for the permanent monitoring of temperature or humidity. The compact dimensions of the humidity sensor are the characteristics of this instrument. The measurement of the temperature and humidity is via a semiconductor component.
Humidity measuring range: 0 … 100% RH
Temperature measuring range: -20 … 60 °C
Output: 4 … 20 mA
Special Feature: Manual switchable analog value output
The PCE-HT110 Humidity Test Instrument or Humidity Detector precisely measures air temperature and relative humidity. This accurate and reliable device shows the current measurements on the large LCD display and saves the measurement data directly to an SD card (included). The PCE-HT110 is equipped with two channels, accommodates an SD card memory of up to 16 GB, offers an adjustable measurement rate / sampling interval, and includes a wall mount, making the device ideal for logging data over an extended period of time.
The PCE-HT110 Humidity Test Instrument or Humidity Detector precisely measures air temperature and relative humidity. This accurate and reliable device shows the current measurements on the large LCD display and saves the measurement data directly to an SD card (included). The PCE-HT110 is equipped with two channels, accommodates an SD card memory of up to 16 GB, offers an adjustable measurement rate / sampling interval, and includes a wall mount, making the device ideal for logging data over an extended period of time.
The PCE-313A Humidity/Temp Data Logger measures relative humidity and temperature and can be used in the air-conditioning sector. The PCE-313A Humidity/Temp Data Logger can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe. The internal memory of this test equipment allows the Humidity/Temp Data Logger to record humidity and temperature data at an adjustable measurement interval. Thanks to its SD memory card (1 to 16 GB) the humidity test instrument can be used for long term data acquisition.
The PCE-HT110 HVAC Humidity / Temperature Data Logger or Humidity Detector precisely measures air temperature and relative humidity. This accurate and reliable device shows the current measurements on the large LCD display and saves the measurement data directly to an SD card (included). The PCE-HT110 is equipped with two channels, accommodates an SD card memory of up to 16 GB, offers an adjustable measurement rate / sampling interval, and includes a wall mount, making the device ideal for logging data over an extended period of time.
The PCE-HT110 HVAC Humidity / Temperature Data Logger or Humidity Detector precisely measures air temperature and relative humidity. This accurate and reliable device shows the current measurements on the large LCD display and saves the measurement data directly to an SD card (included). The PCE-HT110 is equipped with two channels, accommodates an SD card memory of up to 16 GB, offers an adjustable measurement rate / sampling interval, and includes a wall mount, making the device ideal for logging data over an extended period of time.
The HVAC Meter / HVACR Tester is a compact device for non-contact temperature measurement in the range from -50°C ... 400°C / -58 ... 752°F with a fast response time of 0.5 seconds. Our HVAC Meter / HVACR Tester is ideal for applications in technology, industry and maintenance where precise and contact-free temperature checks are required.
Measuring range: -50 ... 400°C / -58 ... 752°F
Resolution: 0.1 °C / 0.1 °F
Accuracy: at -50 ... 0°C: ±3 °C / ± 5.4°F | from 0 ... 400°C / 32 ... 752°F : ±(1.5% of +2°C) / ± (1.5% of +4 °F)
The HVAC Meter / HVACR Tester is ideal for applications in air conditioning and ventilation technology, in laboratories, for environmental measurements, and for outdoor use. The HVAC Meter / HVACR Tester offers various measurement modes and convenient operation via touch buttons.
The HVAC Meter / HVACR Tester with impeller precisely measures wind speed, volume flow and temperature. Our HVAC Meter / HVACR Tester enables measurements in m/s, km/h, knots and other units and displays the wind force on the Beaufort scale.
The HVAC Meter / HVACR Tester is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating current that can be measured without direct contact to the line. The HVAC Meter / HVACR Tester is suitable for measuring resistance, temperature, diodes, continuity, frequencies and capacitance and is particularly useful for diagnosing electrical and electronic components.
The HVAC Meter / HVACR Tester is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating current that can be measured without direct contact to the line. The HVAC Meter / HVACR Tester is suitable for measuring resistance, temperature, diodes, continuity, frequencies and capacitance and is particularly useful for diagnosing electrical and electronic components.
The HVAC Meter / HVACR Tester is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating current that can be measured without direct contact to the line. The HVAC Meter / HVACR Tester is suitable for measuring resistance, temperature, diodes, continuity, frequencies and capacitance and is particularly useful for diagnosing electrical and electronic components.
The HVAC Meter / HVACR Tester is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating current that can be measured without direct contact to the line. The HVAC Meter / HVACR Tester is suitable for measuring resistance, temperature, diodes, continuity, frequencies and capacitance and is particularly useful for diagnosing electrical and electronic components.
A HVAC Meter / HVACR Tester is an important safety device. It recognizes dangerous gas concentrations in the air and sounds the alarm in good time to prevent accidents such as explosions or poisoning. Our HVAC Meter / HVACR Tester has been specially developed for use in homes, offices and similar indoor areas. It detects both natural gas (methane) and liquefied petroleum gas (LPG, consisting of propane and butane) and reacts as soon as a certain concentration is exceeded.
The digital HVAC Meter / HVACR Tester is an accurate and compact meter for differential pressure measurement in a wide range of applications, such as measuring filter resistances, pressure in furnaces, orifices, gas-air ratio equalisation, combustion processes, air conditioning systems, ventilation systems, etc. The HVAC Meter / HVACR Tester is suitable for measuring non-aggressive and non-explosive gases.
measurement range -1 ... +1 kPa (-10 ... +10 mbar)
The digital HVAC Meter / HVACR Tester is an accurate and compact meter for differential pressure measurement in a wide range of applications, such as measuring filter resistances, pressure in furnaces, orifices, gas-air ratio equalisation, combustion processes, air conditioning systems, ventilation systems, etc. The HVAC Meter / HVACR Tester is suitable for measuring non-aggressive and non-explosive gases.
measurement range -10 ... +10 kPa (-100 ... +100 mbar)
The digital HVAC Meter / HVACR Tester is an accurate and compact meter for differential pressure measurement in a wide range of applications, such as measuring filter resistances, pressure in furnaces, orifices, gas-air ratio equalisation, combustion processes, air conditioning systems, ventilation systems, etc. The HVAC Meter / HVACR Tester is suitable for measuring non-aggressive and non-explosive gases.
measurement range -10 ... +10 kPa (-100 ... +100 mbar)
The digital HVAC Meter / HVACR Tester is an accurate and compact meter for differential pressure measurement in a wide range of applications, such as measuring filter resistances, pressure in furnaces, orifices, gas-air ratio equalisation, combustion processes, air conditioning systems, ventilation systems, etc. The HVAC Meter / HVACR Tester is suitable for measuring non-aggressive and non-explosive gases.
measurement range -100 ... +100 kPa (-1 ... +1 bar)
The digital HVAC Meter / HVACR Tester is an accurate and compact meter for differential pressure measurement in a wide range of applications, such as measuring filter resistances, pressure in furnaces, orifices, gas-air ratio equalisation, combustion processes, air conditioning systems, ventilation systems, etc. The HVAC Meter / HVACR Tester is suitable for measuring non-aggressive and non-explosive gases.
measurement range -125 ... +125 Pa (-1.25 ... +1.25 bar)
The digital HVAC Meter / HVACR Tester is an accurate and compact meter for differential pressure measurement in a wide range of applications, such as measuring filter resistances, pressure in furnaces, orifices, gas-air ratio equalisation, combustion processes, air conditioning systems, ventilation systems, etc. The HVAC Meter / HVACR Tester is suitable for measuring non-aggressive and non-explosive gases.
measurement range -2 ... +2 kPa (-20 ... +20 mbar)
The digital HVAC Meter / HVACR Tester is an accurate and compact meter for differential pressure measurement in a wide range of applications, such as measuring filter resistances, pressure in furnaces, orifices, gas-air ratio equalisation, combustion processes, air conditioning systems, ventilation systems, etc. The HVAC Meter / HVACR Tester is suitable for measuring non-aggressive and non-explosive gases.
measurement range -250 ... +250 Pa (-2.5 ... +2.5 bar)
The digital HVAC Meter / HVACR Tester is an accurate and compact meter for differential pressure measurement in a wide range of applications, such as measuring filter resistances, pressure in furnaces, orifices, gas-air ratio equalisation, combustion processes, air conditioning systems, ventilation systems, etc. The HVAC Meter / HVACR Tester is suitable for measuring non-aggressive and non-explosive gases.
measurement range -4 ... +4 kPa (-40 ... +40 mbar)
The digital HVAC Meter / HVACR Tester is an accurate and compact meter for differential pressure measurement in a wide range of applications, such as measuring filter resistances, pressure in furnaces, orifices, gas-air ratio equalisation, combustion processes, air conditioning systems, ventilation systems, etc. The HVAC Meter / HVACR Tester is suitable for measuring non-aggressive and non-explosive gases.
measurement range -4 ... +4 kPa (-40 ... +40 mbar)
The digital HVAC Meter / HVACR Tester is an accurate and compact meter for differential pressure measurement in a wide range of applications, such as measuring filter resistances, pressure in furnaces, orifices, gas-air ratio equalisation, combustion processes, air conditioning systems, ventilation systems, etc. The HVAC Meter / HVACR Tester is suitable for measuring non-aggressive and non-explosive gases.
measurement range -40 ... +40 kPa (-400 ... +400 mbar)
The digital HVAC Meter / HVACR Tester is an accurate and compact meter for differential pressure measurement in a wide range of applications, such as measuring filter resistances, pressure in furnaces, orifices, gas-air ratio equalisation, combustion processes, air conditioning systems, ventilation systems, etc. The HVAC Meter / HVACR Tester is suitable for measuring non-aggressive and non-explosive gases.
measurement range -40 ... +40 kPa (-400 ... +400 mbar)
The digital HVAC Meter / HVACR Tester is an accurate and compact meter for differential pressure measurement in a wide range of applications, such as measuring filter resistances, pressure in furnaces, orifices, gas-air ratio equalisation, combustion processes, air conditioning systems, ventilation systems, etc. The HVAC Meter / HVACR Tester is suitable for measuring non-aggressive and non-explosive gases.
measurement range -50 ... +50 kPa (-500 ... +500 mbar)
The digital HVAC Meter / HVACR Tester is an accurate and compact meter for differential pressure measurement in a wide range of applications, such as measuring filter resistances, pressure in furnaces, orifices, gas-air ratio equalisation, combustion processes, air conditioning systems, ventilation systems, etc. The HVAC Meter / HVACR Tester is suitable for measuring non-aggressive and non-explosive gases.
measurement range -50 ... +50 kPa (-500 ... +500 mbar)
The HVAC Meter / HVACR Tester is equipped with a reliable motor that provides sufficient torque for stable operation. With a flow rate of 56 l/min, the HVAC Meter / HVACR Tester can quickly evacuate air and moisture from air conditioning systems, cooling systems or heat pumps.
Flow rate: 56 ... 68 l/min
Connection: 1/4 inch
For common refrigerants e.g. R12, R22, R134a ...etc.
The HVAC Meter / HVACR Tester is equipped with a powerful motor that provides sufficient torque for stable operation. The motor power is 1.014 hp (750 W) and ensures reliable and efficient performance. With a flow rate of 340 ... 407 l/min, the HVAC Meter / HVACR Tester can quickly remove air and moisture from air conditioning systems, cooling systems or heat pumps.
Flow rate: 340 ... 407 l/min
Connections: 1/4 inch and 3/8 inch
For common refrigerants e.g. R12, R22, R134a ...etc.
PCE Instruments offers a wide range of stock products. However, despite an extensive selection of stock product offerings, sometimes a custom product is required to satisfy the specific requirements of a new, groundbreaking or special application.
Are you looking for custom test instruments?
Look no further than PCE Instruments. The DIN EN ISO 9001-certified PCE Product and Development Company GmbH produces customized test instruments tailored to meet the unique needs of a diverse customer base. By capitalizing on the expert knowledge and extensive experience of PCE’s industry-leading engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
Throughout the design, development and production process, PCE's engineers and technicians work hand-in-hand with each customer to ensure the final test instrument exceeds expectations. Specifications are clearly defined from the start of the project. Sensors, microprocessors and other electronic components are sourced from high-quality suppliers. Software is written to best support the customer's systems, processes and procedures. Qualified calibration laboratories are tasked with verifying the measurement accuracy of the custom test instrument, and rigorous testing is conducted to make certain that the device will function properly under the anticipated operating conditions.
If you are interested in pursuing the creation of a custom test instrument designed to accommodate an unusual or highly specialized measuring task, please contact the friendly and knowledgable staff at info@industrial-needs.com or +44 (0) 161-464902-5 for PCE Instruments UK, or at info@pce-americas.com or +1 (561) 320-9162 for PCE Americas Inc.
engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.