£ 3,967.00
Price excl. VAT &. delivery
For industrial continuous production of wood pellets, chips, sawdust and similar materials when in-line moisture measurement for monitoring and controlling the drying and mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 210 moisture sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.
Suitable for determining the humidity of bulk substances, this bulk material moisture analyser can be fitted into containers and systems such as troughs, bunkers, distributors, augers, conveyors, bins and silos. This permits 24/7 moisture measurement of fibrous materials, sawdust, gravel, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, pastes, seed, or similar bulk or flowing substances.
For industrial continuous production of wood pellets, chips, sawdust and similar materials when on-line moisture measurement for monitoring and controlling the drying and mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 300P moisture test sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.
Designed specifically for use real-time measurement of percent moisture measurement of bulk materials. Material in flowing mass, such as granular materials, sand, sawdust, fly ash (mineral), wood chips (surface to 5 cm), grain, powders, seed, and pastes is continuously measurable. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production.
maximum weighing capacity of 400 g, a sample volume of 360 cm³ and a high measuring resolution of 0.001 g, it guarantees precise and reliable moisture measurements. The Moisture Analyser / Moisture Analyzer works on the principle of drying with simultaneous weight recording whereas the weight loss is continuously measured and displayed as a percentage of the total mass.
The moisture analyzer is a sensor for measuring moisture of sand and liquids consisting of a central probe surrounded by four other probes. The probes and sensor housing are made of stainless steel AISI 321. Our moisture analyzer is ideally suited for installation in tanks with liquid materials such as fuel oil, sludge from cement production, and fuels (CWF).
maximum weighing capacity of 400 g, a sample volume of 360 cm³ and a high measuring resolution of 0.001 g, it guarantees precise and reliable moisture measurements. The Moisture Analyser / Moisture Analyzer is ideal for applications in the wood, agricultural and plastics industries, e.g. for shavings, animal feed or granulates. It delivers precise results even at very low moisture contents.
drying temperature of up to 360 °C. It is ideal for applications in raw material extraction, production, processing, research and recycling, as well as especially for building materials such as cement, concrete and gravel and the chemical industry, including powders, granulates and pastes. With a maximum sample weight of 220 g and a high measuring resolution of 0.001 g, our Moisture Analyser / Moisture Analyzer enables precise moisture measurement.
various applications in raw material extraction, production, processing, research and recycling. With a maximum initial sample weight of 200 g and a high measuring resolution of 0.001 g, the Moisture Analyser / Moisture Analyzer enables precise moisture measurement.
plaster analysis. With a maximum weighing capacity of 220 g and a measuring resolution of 0.001 g, it enables precise and reliable moisture measurements. The Moisture Analyser / Moisture Analyzer works on the principle of drying with simultaneous weighing. During drying, the weight loss is continuously recorded and displayed as a percentage of the total mass.
material extraction, production, processing, research and recycling. With a maximum sample weight of 200 g and a high measuring resolution of 0.001 g, the Moisture Analyser / Moisture Analyzer enables precise moisture measurement.
plaster / gypsum analysis. With a maximum weighing capacity of 220 g and a measuring resolution of 0.001 g, it enables exact and reliable moisture measurements. The Moisture Analyser / Moisture Analyzer works on the principle of drying with simultaneous weighing. During drying, the weight loss is continuously recorded and displayed as a percentage of the total mass.
drying temperature of up to 360 °C. It is ideal for applications in raw material extraction, production, processing, research and recycling as well as especially for building materials such as cement, concrete and gravel and the chemical industry, including powders, granulates and pastes. With a maximum sample weight of 220 g and a high measuring resolution of 0.001 g, the Moisture Analyser / Moisture Analyzer enables precise moisture measurement.
content in samples. It is suitable for applications in raw material extraction, production, processing, storage, trade, research and recycling. With a maximum sample weight of 200 g and a high resolution of 0.001 g, the Moisture Analyser / Moisture Analyzer enables exact measurements of the moisture content and the ash residue.
solid materials. It is suitable for various applications in raw material extraction, production, processing, research and recycling. With a maximum sample weight of 220 g and a high measuring resolution of 0.001 g, the Moisture Analyser / Moisture Analyzer enables precise moisture measurement.
and solid materials and is suitable for various applications in raw material extraction, production, processing, research and recycling. With a maximum sample weight of 220 g and a high measuring resolution of 0.001 g, the Moisture Analyser / Moisture Analyzer enables precise moisture measurement.
The Multifunction Moisture Analyzer PCE-MA 200 is used to weigh a range of substances up to 200g / 7.05oz and measure their moisture content. A halogen lamp heats up the chamber to 199 °C / 390 °F. The Multifunction Moisture Analyzer dries the substance to be weighed within the heating chamber and determines the moisture content from the difference in weight.
The Multifunction Moisture Analyzer PCE-MA 100-ICA allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the Multifunction Moisture Analyzer dries the material to be weighed, and then calculates the moisture content from the weight difference.
The Multifunction Moisture Analyzer PCE-MA 200 is used to weigh a range of substances up to 200g / 7.05oz and measure their moisture content. A halogen lamp heats up the chamber to 199 °C / 390 °F. The multifunction moisture analyzer dries the substance to be weighed within the heating chamber and determines the moisture content from the difference in weight.