Wind Speed Alarm / Wind Alarm Controller

Wind Speed Alarm / Wind Alarm Controller PCE-WSAC 50
£ 378.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-WSAC 50 is an Wind Alarm Controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This Wind Speed Alarm allows measurement of the slightest of wind movements. PCE-WSAC 50 is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.


- Pre-alarm and full alarm with visual and audible warnings
- Optional RS-485 modbus interface for data communication
- Measuring range: 0 ... 50 m/s or 0 ... 110 mph
- Incl. ISO calibration certificate

 

Wind Speed Alarm / Wind Alarm Controller PCE-FST-200-201-U
£ 165.00
Price excl. VAT &. delivery
2 year Warranty

The wind speed sensor is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form.


- Output signal: 0 … 10V
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0.5 m/s … 50 m/s (1.1 ... 111.8 mph)

 

Wind Speed Alarm / Wind Alarm Controller PCE-FST-200-201-I
£ 187.00
Price excl. VAT &. delivery
2 year Warranty

The wind speed sensor is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form.


- Output signal: 4 … 20-mA
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0.5 m/s … 50 m/s (1.1 ... 111.8 mph)

 

Wind Speed Alarm / Wind Alarm Controller PCE-FST-200-201-H-I
£ 266.00
Price excl. VAT &. delivery
2 year Warranty

The wind speed sensor is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form. With heating.


- Output signal: 4 … 20-mA  
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0.5 m/s  … 50 m/s (1.1 ... 111.8 mph)

 

Wind Speed Alarm / Wind Alarm Controller PCE-FST-200-201-H-U
£ 266.00
Price excl. VAT &. delivery
2 year Warranty

The wind speed sensor is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form. With heating.


- Output signal: 0 … 10V
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0.5 m/s … 50 m/s (1.1 ... 111.8 mph)

 

Wind Speed Alarm Controller PCE-WSAC 50W 230
£ 1,059.00
Price excl. VAT &. delivery
2 year Warranty
The wind speed alarm controller PCE-WSAC 50W 230 is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the wind speed alarm controller means stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
Wind Speed Alarm Controller PCE-WSAC 50W 24
£ 1,059.00
Price excl. VAT &. delivery
2 year Warranty
The wind speed alarm controller PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the wind speed alarm controller means stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analog output
- Supply voltage: 24V DC
- Ambient temperature -20 ... 70°C / -4 ... 158°F
- units adjustable: km / h, mph, m / s
Wind Speed Alarm Controller PCE-WSAC 50W 230-ICA incl ISO calibration cert.
£ 1,175.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The Wind Speed Alarm Controller PCE-WSAC 50W 230-ICA is useful for measuring the wind speed to help determine the preferred site for a wind turbine installation. The device also monitors the wind load on existing wind farms, as well as on cranes for safey purposes. Due to the integrated 4 ... 20-mA analogue output of the wind speed alarm controller, the measured data can also be transferred to other controllers for evaluation.


- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
- Incl. ISO calibration certificate
Wind Speed Alarm PCE-WSAC 50W 24-ICA incl. ISO Calibration Certificate
£ 1,175.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The wind speed alarm PCE-WSAC 50W 24-ICA is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. Due to the integrated 4 ... 20-mA analogue output of the wind speed alarm, the measured data can also be transferred to other controllers for evaluation.


- Measuring range up to 180 km / h
- Input: pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analog output
- Supply voltage: 24V DC
- Ambient temperature -20 ... 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s 
- Incl. ISO calibration certificate
Wind Speed Alarm / Wind Alarm Controller CWG 2
£ 335.00
Price excl. VAT &. delivery
2 year Warranty
Wind speed alarm / wind alarm controller with 0 ... 10 V output. Wind speed alarm / wind alarm controller for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 0 ... 10 V
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes
Wind Speed Alarm / Wind Alarm Controller CWG 1
£ 356.00
Price excl. VAT &. delivery
2 year Warranty
Wind Speed Alarm / Wind Alarm Controller with 4 ... 20 mA output. Wind speed alarm / wind alarm controller for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 4 ... 20 mA
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes