Industrial Measurement Products and Solutions

Water Analysis Meter

Order no.: PCE-PH 22

The water resistant PCE-PH 22 water analysis meter quickly detects the pH value and temperature. Thanks to its split display it can show the pH value and temperature reading simultaneous with this water analysis meter.


- Simultaneous display of pH value and temperature: no thermometer is needed
- Automatic temperature compensation
- (ATC) in the range of 0 to 80 °C
- Displays temperature in °C and °F 

 

Manufacturer: PCE Instruments
£ 60.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CM 41

With the Water Analysis Meter PCE-CM 41, it is possible to measure conductivity value, the amount of all the solid material or dissolved salts  (TDS - Total Dissolved Solids) and the temperature. The Conductivity Tester is very easy to carry everywhere thanks to its small size.


- EC conductivity: 0...2000 µS/cm  /  0...20 mS/cm
- Salt content TDS: 0...2000 mg/l (ppm)  /  20000 mg/l (ppm)
- Temperature: 0.0...+60 °C
- Water resistant (IP 67)

 

Manufacturer: PCE Instruments
£ 77.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-228

The PCE-228 water analysis meter is an easy-to-use handheld device for measuring pH, mV and °C. With the PCE-228 water analysis meter, both temperature and pH values can be directly stored onto a SD card (in Excel format), or transferred to a PC through an RS-232 interface.


Measurement range:
- pH: 0.00 to 14.00 pH
- Redox: -1,999 to 0 to 1,999 mV (only with the optional Redox electrode)
- Temperature: 0.0...65.0 °C (only with the temperature sensor)

 

Manufacturer: PCE Instruments
£ 151.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-228-R

The PCE-288-R Water Analysis Meter or Redox Meter is a very easy to use meter to measure mV / pH / ºC. In the PCE-228-R Redox Meter, values can be directly stored in the SD memory card (Excel format) or can be directly transferred in real time to a PC or laptop by means of the RS-232 interface.


- Good quality at an affordable price
- SD memory card (1 ... 16 GB)
- Values are directly stored in Excel format in the SD memory card (any
  additional software is required)
- RS-232 interface for real-time data transfer

 

Manufacturer: PCE Instruments
£ 151.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-PHD 1

PCE-PHD 1 Water Analysis Meter is a portable, easy-to-use, multifunction measuring device with multiple capabilities for inspecting water quality. Offering extraordinary precision at an affordable price, the Water Analysis Meter is used for laboratory and in situ testing of the pH value, redox, conductivity, salt content, oxygen level and temperature of water.


- Parameter: pH, Redox, Conductivity, TDS, Salt, Oxygen, Temperature
- Automatic temperature compensation
- Sampling rate of 1 sec.
- SD card memory (16 GB max.)
- Interface: RS-232
- 3 point calibration

 

Manufacturer: PCE Instruments
£ 279.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-TUM 20

The PCE-TUM 20 water analysis meter is a handy turbidity measuring device equipped with a large LCD screen and user-friendly keyboard. This portable turbidity meter features two automatically switching measuring ranges between 0 ... 50 NTU and 50 ... 1000 NTU for increased accuracy.


- 0 ... 1000 NTU turbidity measuring range
- Infrared LED light source
- Calibration standards included

Manufacturer: PCE Instruments
£ 289.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: GMH 5530

GMH 5530 is a waterproof water analysis meter ideal for use in moist environments. Thanks to an ingress protection rating of IP67, this multifunctional meter can be used in adverse conditions.


Measuring ranges:
- pH: -2.000 ... 16.000 pH
- Redox: -2000.0 ... 2000.0 mV
- Temperature: -5.0 ... +150.0 °C / 23.0 ... 302.0 °F
- Relative humidity: 0.0 ... 70.0 % RH

 

Manufacturer: GHM Messtechnik GmbH
£ 187.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: HI 96734

The water analysis meter HI 96734 is suitable for the daily measurement of chlorine content. The HI 96734 chlorine meter or photometer is very easy to operate and gives the chlorine content in seconds. The selection of the most suitable chlorine meter for your application depends on your chlorine measurement range.


- Free + total chlorine measuring range: 0 ... 10.0 mg / l
- Resolution: 0.1 mg / l
- Accuracy: ± 0.1 mg / l ± 3%

Please always order the appropriate reagents for the chlorine meter!

 

£ 223.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: GMH 5550

GMH 5550 is a waterproof datalogging water analysis meter ideal for use in moist environments. Thanks to an ingress protection rating of IP67, this multifunctional meter can be used in adverse conditions.


Measuring ranges:
- pH: -2.000 ... 16.000 pH
- Redox: -2000.0 ... 2000.0 mV
- Temperature: -5.0 ... +150.0 °C / 23.0 ... 302.0 °F
- Relative humidity: 0.0 ... 70.0 % RH

 

Manufacturer: GHM Messtechnik GmbH
£ 276.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: HI 9124

The HI 9124 is a waterproof water analysis meter. The large dual-level LCD of the meter displays both the pH and temperature along with an operational guide.


Measuring ranges:
- pH: -2.00 to 16.00 pH
- Temperature: 20.0 to 120.0 °C / -4.0 °F to 248.0 °F
Accuracy @ 20 °C
- pH: ±0.01 pH
- Temperature: ±0.4 °C / ±0.8 °F (excluding probe error)

 

£ 370.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: HI 4222-02

The Water Analysis Meter HI 4222-2 is a dual-channel, research-grade laboratory pH Bench Meter with a backlit 240 x 320 dot-matrix color screen and millesimal measuring resolution. Features of the Water Analysis Meter include auto-logging and real-time graphic displays and auto-end point mode.


- Ranges: -2,0 ... 20,0 / -2,00 ... 20,00 / -2,000 ... 20,000 pH
- Resolution: 0.1 / 0.01 / 0.001 pH
- Accuracy: ± 0.1 / ± 0.01 / ± 0.002 PH

 

£ 1,284.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: HI 9829-

HI 9829 is a multifunction pH Meter capable of measuring pH, pH / mV, redox, dissolved oxygen, conductivity, resistance, total dissolved solids (TDS), salinity, seawater sigma, barometric pressure and temperature as well as turbidity, depending on the configuration of the probe's features. This portable handheld data logging measuring system:


- Monitors up to 14 different water quality parameters (7 measured, 7
  calculated)
- Boasts IP 67 ingress protection rating on meter and IP 68 on waterproof probe
- Comes either with or without GPS 

 

Manufacturer: Hanna
£ 2,582.43

Price excl. VAT &. delivery
2 year Warranty