Industrial Measurement Products and Solutions

Torque Meter / Torque Tester

Order no.: PCE-TM 80

The Torque Meter PCE-TM 80 with external sensor to measure the static or startup torque moment in screws, components, switches, transmission shafts, etc. The Torque Meter PCE-TM 80 is an affordable solution to easily calibrate and test static torque measurements.


- Range 0 ... 147 Ncm
- Selection of  3 units (Ncm, kgfcm, lbfin)
- Digital output RS-232
- External torque sensor
- Measures startup or static torque, not dynamic torque 

 

Manufacturer: PCE Instruments
£ 401.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-FB 10TW

The torque wrench tester of the PCE-TWM series can test torque wrenches up to 500 Nm, depending on the sensor. Due to the precise evaluation electronics, the torque wrench tester has a measurement accuracy of 0.5 % of the measurement range. The torque wrench is fixed by means of a 1/4' female square. The torque wrench tester consists of an evaluation unit and an external torque transducer with a cable which makes the measurement setup convenient.


- Measurement range: 10 Nm (1 kgfm)
- Resolution: 0.01 Nm
- Accuracy: ±0.5 % of measurement range
- Units of measurement: Nm, Ncm, kgfm, lbfin, gfm
- Calibration: possible with external F2 weights
- Max. overload: 50 % of measurement range

 

Manufacturer: PCE Instruments
£ 752.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-FB 2TW

The torque wrench tester of the PCE-TWM series can test torque wrenches up to 500 Nm, depending on the sensor. Due to the precise evaluation electronics, the torque wrench tester has a measurement accuracy of 0.5 % of the measurement range. The torque wrench is fixed by means of a 1/4' female square. The torque wrench tester consists of an evaluation unit and an external torque transducer with a cable which makes the measurement setup convenient.


- Measurement range: 2 Nm (0.2 kgfm)
- Resolution: 0.001 Nm
- Accuracy: ±0.5 % of measurement range
- Units of measurement: Nm, Ncm, kgfm, lbfin, gfm
- Calibration: possible with external F2 weights
- Max. overload: 50 % of measurement range

 

Manufacturer: PCE Instruments
£ 752.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-FB 5TW

The torque wrench tester of the PCE-TWM series can test torque wrenches up to 500 Nm, depending on the sensor. Due to the precise evaluation electronics, the torque wrench tester has a measurement accuracy of 0.5 % of the measurement range. The torque wrench is fixed by means of a 1/4' female square. The torque wrench tester consists of an evaluation unit and an external torque transducer with a cable which makes the measurement setup convenient.


- Measurement range: 5 Nm (0.5 kgfm)
- Resolution: 0.001 Nm
- Accuracy: ±0.5 % of measurement range
- Units of measurement: Nm, Ncm, kgfm, lbfin, gfm
- Calibration: possible with external F2 weights
- Max. overload: 50 % of measurement range

 

Manufacturer: PCE Instruments
£ 752.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-FB 10TS

The torque meter serves for detection of the loosening torque as well as for tightening of screws. Simultaneously the torque meter can be used as a monitoring instrument. The torque test instrument provides a keyed chuck with two steady handles.


- Measuring range: 10 Nm (1 kgf-m)
- Max. 0,5 % accuracy from the measuring range
- Measuring rate freely adjustable up to 1000 Hz
- 24 Bit Processor
- Keyed chuck up to Ø 13 mm

 

Manufacturer: PCE Instruments
£ 990.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-FB 2TS

The torque meter serves for detection of the loosening torque as well as for tightening of screws. Simultaneously the torque meter can be used as a monitoring instrument. The torque test instrument provides a keyed chuck with two steady handles.


- Measuring range: 2 Nm (0,2 kgf-m)
- Max. 0,5 % accuracy from the measuring range
- Measuring rate freely adjustable up to 1000 Hz
- 24 Bit Processor
- Keyed chuck up to Ø 13 mm

 

Manufacturer: PCE Instruments
£ 990.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-FB 5TS

The torque meter serves for detection of the loosening torque as well as for tightening of screws. Simultaneously the torque meter can be used as a monitoring instrument. The torque test instrument provides a keyed chuck with two steady handles.


- Measuring range: 5 Nm (0,5 kgf-m)
- Max. 0,5 % accuracy from the measuring range
- Measuring rate freely adjustable up to 1000 Hz
- 24 Bit Processor
- Keyed chuck up to Ø 13 mm

 

Manufacturer: PCE Instruments
£ 990.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-TTM 10

The screw cap torque meter PCE-TTM 5 is used for testing the torque on various kinds of screw caps. That screw cap torque tester determines quickly and with certainty the required expenditure of force for opening and closing screw caps. Therefore the course of the torque test is recorded continuously, so that the results can be evaluated either at the screw cap torque tester itself or on a computer.


- Measurement range: 10 Nm / 1,000 Ncm / 1000 gfm / 100 lbfin
- Measuring resolution: 0.01 Nm / 1 Ncm / 1 gfm / 0.1 lbfin
- Measuring speed up to 1,000 Hz
- For rotation to left or right side

 

Manufacturer: PCE Instruments
£ 1,076.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-TTM 2

The screw cap torque meter PCE-TTM 2 is used for testing the torque on various kinds of screw caps. That screw cap torque tester determines quickly and with certainty the required expenditure of force for opening and closing screw caps. Therefore the course of the torque test is recorded continuously, so that the results can be evaluated either at the screw cap torque tester itself or on a computer.


- Measurement range: 2 Nm / 200 Ncm / 200 gfm / 20 lbfin
- Measuring resolution: 0.001 Nm / 0.1 Ncm / 0.1 gfm / 0.01 lbfin
- Measuring speed up to 1,000 Hz
- For rotation to left or right side

 

Manufacturer: PCE Instruments
£ 1,076.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-TTM 5

The screw cap torque meter PCE-TTM 5 is used for testing the torque on various kinds of screw caps. That screw cap torque tester determines quickly and with certainty the required expenditure of force for opening and closing screw caps. Therefore the course of the torque test is recorded continuously, so that the results can be evaluated either at the screw cap torque tester itself or on a computer.


- Measurement range: 5 Nm / 500 Ncm / 500 gfm / 50 lbfin
- Measuring resolution: 0.001 Nm / 0.1 Ncm / 0.1 gfm / 0.01 lbfin
- Measuring speed up to 1,000 Hz
- For rotation to left or right side

 

Manufacturer: PCE Instruments
£ 1,076.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-FB 500TW

The torque wrench tester of the PCE-TWM series can test torque wrenches up to 500 Nm, depending on the sensor. Due to the precise evaluation electronics, the torque wrench tester has a measurement accuracy of 0.5 % of the measurement range. The torque wrench is fixed by means of a 1/4' female square. The torque wrench tester consists of an evaluation unit and an external torque transducer with a cable which makes the measurement setup convenient.


- Measurement range: 500 Nm (50 kgfm)
- Resolution: 1 Nm
- Accuracy: ±0.5 % of measurement range
- Units of measurement: Nm, Ncm, kgfm, lbfin, gfm
- Calibration: possible with external F2 weights
- Max. overload: 50 % of measurement range

 

Manufacturer: PCE Instruments
£ 1,096.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DTT 1

The torque meter PCE-DTT 1 was designed to determine the torque of screw caps on bottles and similar containers. It does not matter whether the torque meter of water bottles is used in the laboratory or used in production. The torque meter is perfect for constant quality control. With the SD memory card, all test results can be fully documented.


- Measuring range: ± 5Nm
- Resolution: 0.0001 nm
- Measuring rate: max. 200 Hz
- power and battery operation
- Torque meter for QM
- Flexible water bottle receptacle


Manufacturer: PCE Instruments
£ 2,022.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: 516.3310

The torque meter 516.3310 was developed for the testing, measuring and adjusting of torques within the range of 1 to 9 mNm according to DIN EN ISO 6789 standards. The torque meter is capable of controlled fastening in a clockwise and counter clockwise direction. The accuracy of ±6 % of the measuring range is ensured for a minimum of 5,000 tightening cycles, so that the torque meter enables precise and repeatable measurements over a long period.


- Measuring range: 1 ... 9 mNm
- Resolution: 0,2 mNm
- Accuracy: ±6 % of the measuring range
- Large analogue display with drag indicator

 

Manufacturer: KS Tools
£ 836.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: 516.3315

The torque meter 516.3315 was developed for the testing, measuring and adjusting of torques within the range of 2 to 15 mNm according to DIN EN ISO 6789 standards. The torque meter is capable of controlled fastening in a clockwise and counter clockwise direction. The accuracy of ±6 % of the measuring range is ensured for a minimum of 5,000 tightening cycles, so that the torque meter enables precise and repeatable measurements over a long period.


- Measuring range: 2 ... 15 mNm
- Resolution: 0,2 mNm
- Accuracy: ±6 % of the measuring range
- Large analogue display with drag indicator

 

Manufacturer: KS Tools
£ 836.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: 516.3320

The torque meter 516.3320 was developed for the testing, measuring and adjusting of torques within the range of 4 to 30 mNm according to DIN EN ISO 6789 standards. The torque meter is capable of controlled fastening in a clockwise and counter clockwise direction. The accuracy of ±6 % of the measuring range is ensured for a minimum of 5,000 tightening cycles, so that the torque meter enables precise and repeatable measurements over a long period.


- Measuring range: 4 ... 30 mNm
- Resolution: 0,5 mNm
- Accuracy: ±6 % of the measuring range
- Large analogue display with drag indicator

 

Manufacturer: KS Tools
£ 836.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: 516.3325

The torque meter 516.3325 was developed for the testing, measuring and adjusting of torques within the range of 5 to 60 mNm according to DIN EN ISO 6789 standards. The torque meter is capable of controlled fastening in a clockwise and counter clockwise direction. The accuracy of ±6 % of the measuring range is ensured for a minimum of 5,000 tightening cycles, so that the torque meter enables precise and repeatable measurements over a long period.


- Measuring range: 5 ... 60 mNm
- Resolution: 1 mNm
- Accuracy: ±6 % of the measuring range
- Large analogue display with drag indicator

 

Manufacturer: KS Tools
£ 836.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: 516.3330

The torque meter 516.3330 was developed for the testing, measuring and adjusting of torques within the range of 10 to 120 mNm according to DIN EN ISO 6789 standards. The torque meter is capable of controlled fastening in a clockwise and counter clockwise direction. The accuracy of ±6 % of the measuring range is ensured for a minimum of 5,000 tightening cycles, so that the torque meter enables precise and repeatable measurements over a long period.


- Measuring range: 10 ... 120 mNm
- Resolution: 2 mNm
- Accuracy: ±6 % of the measuring range
- Large analogue display with drag indicator

 

Manufacturer: KS Tools
£ 836.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: 516.3335

The torque meter 516.3335 was developed for the testing, measuring and adjusting of torques within the range of 20 to 240 mNm according to DIN EN ISO 6789 standards. The torque meter is capable of controlled fastening in a clockwise and counter clockwise direction. The accuracy of ±6 % of the measuring range is ensured for a minimum of 5,000 tightening cycles, so that the torque meter enables precise and repeatable measurements over a long period.


- Measuring range: 20 ... 240 mNm
- Resolution: 5 mNm
- Accuracy: ±6 % of the measuring range
- Large analogue display with drag indicator

 

Manufacturer: KS Tools
£ 836.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: MVD-12NM

The mechanical closing Torque Meter ensures a fast and comfortable measurement and control of moments of torque as well as torsional moments.


- Measuring range: 120 ... 1200 Ncm
- Clamping range: 7 ... 140 mm
- Determination of the torque of screw and plug connectors
- Sturdy cast aluminum housing
- With 72 mm scale diameter

 

Manufacturer: INDUK GmbH
£ 1,050.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: MVD-150NCM

The mechanical closing Torque Meter ensures a fast and comfortable measurement and control of moments of torque as well as torsional moments.


- Measuring range: 15 Ncm ... 150 Ncm
- Clamping range: 7 ... 140 mm
- Determination of the torque of screw and plug connectors
- Sturdy cast aluminum housing
- With 72 mm scale diameter

 

Manufacturer: INDUK GmbH
£ 1,050.00

Price excl. VAT &. delivery
2 year Warranty