PCE Instruments

Temperature Meter

Order no.: PCE-VDL 16I
The temperature meter PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this temperature meter is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Temperature, Humidity, Air pressure, Vibration, and Light

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T390

The PCE-T390 temperature meter is a digital device with four input channels for type K and type J temperature sensors and two input channels for PT100 temperature sensors. The PCE-T390 temperature meter has a SD card slot (from 1 ... 16 GB) for storing the measured data. The data is stored in xls format on the SD card of the temperature meter so that no additional software is needed for further analysis.


- 4 input channels for type-K, J temperature sensors
- 2 input channels for Pt100 temperature sensors
2 x type-K TF-500 temperature sensors are included in the package
- SD card memory (1 ... 16 GB)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-777N

The Temperature Meter PCE-777N measures non-destructively and from a distance, the temperature of surfaces via infrared beam. This small temperature meter is characterized by simple operation and the red sighting tool.


- Temperature range: -30 ... 260°C / -22 ... 500°F
- Measuring spot (measuring distance to measuring spot size): 8: 1
- Resolution: 0.1°C / 0.18°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-666

The temperature meter PCE-666 is a combined thermometer which can measure with or without contact. The temperature meter is equipped with a measuring tip and a measuring clamp. As soon as the measuring tip is unfolded, it will start a temperature measurement automatically. If this is not the case, the measuring clamp will be used for the measurement.


- Measurement values displayed in °C or °F
- Auto Power Off, Hold function
- Quick measuring sequence (short measuring time)
- Distance-to-target ratio of 1:1

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-890U

With the PCE-890U temperature meter, measurements of surface temperatures can be carried out quickly and easily. Since the temperature meter uses infrared radiation for temperature measurement, no direct contact with the measuring object is required. The PCE-890U temperature meter makes it easy to measure objects from a distance that are difficult to access.


- Measuring range: -50 ... 1150°C / -58 ... 2102°F
- Accuracy: ± 1.5% ± 2°C / 3.6°F (0 ... 500°C / 32 ... 932°F)
- Resolution: 0.1°C / 0.18°F (<1000°C / 1832°F)
- Emission level: 0.1 ... 1

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-313A-ICA

The PCE-313A temperature meter measures relative humidity and temperature and can be used in the air-conditioning sector. The PCE-313A temperature meter can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe. The internal memory of this test equipment allows the temperature meter to record humidity and temperature data at an adjustable measurement interval. Thanks to its SD memory card (1 to 16 GB) the humidity test instrument can be used for long term data acquisition.


- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.5 ... 120°F
- Wet bulb temperature: -21 ... 50°C / -5.8 ... 122°F
- Memory: SD card (1 ... 16 GB)
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TC 28

The Temperature Meter PCE-TC 28 was designed for taking non-contact temperature measurements. To get accurate readings, the emissivity of the temperature meter can be adjusted, depending on the operation purpose. Besides taking infrared images, the temperature meter can also take normal pictures, as well as a mixture of both, due to the built-in digital camera.


- Measurement range: -20 ... 300°C / -4 ... 572°F
- Accuracy: ±2%, ±2°C / 3.6°F
- Frequency image recording: 9 Hz
- Camera: 48608 Pixel

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T 1200

PCE-T 1200 is a 12-channel temperature data logger that accommodates SD cards up to 16 GB in size. The optional software allows the temperature meter to connect to a PC via USB for direct data transfer and analysis via Microsoft Excel.

- 12-channel data logger for temperature (°C / °F)
- Works with type K, J, T, E, R and S thermocouple sensors
- Adjustable datalogging interval from 1 ... 3600 seconds per channel

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TC 29

PCE-TC 29 is a non-contact IR temperature meter imaging camera used for visual inspection and non-contact infrared (IR) temperature measurement. Ideal for industrial use in electrical, mechanical, and building installations (such as in the auditing of machines, engines, or heating, ventilation, and air conditioning (HVAC) systems), this affordable infrared imager captures and saves 60 x 60 pixel IR resolution images to the included MicroSD card memory.


- IR Resolution: 60 x 60 pixels
- Temperature measuring range: -20 ... 300°C / -4 ... 572°F
- IR image, visual image, picture-in-picture
- Hot / cold spot localisation
- Field of view: 20 x 20°
- Adjustable emissivity from 0.1 ... 1.0
- Frequency image recording: 6 Hz
- Data storage: Micro SD


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-778

The PCE-778 is a temperature measuring device which can measure from a distance. This contactless measurement with the infrared temperature meter is suitable for temperatures up to 800°C / 1472°F. Thus, distances can be overcome, in which the temperature for the human body is too high.


- Measuring range: -40 ... 800°C / -40 ... 1472°F
- Background illuminated display
- Optical resolution 12: 1
- Alarm function

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-778-ICA

The temperature meter PCE-778 is an infrared laser thermometer that can be used in the food industry, for the prevention of fires of all kind, in the chemical industry, and in the storage and transportation industry. The temperature meter has several useful features, including the extreme value (Maximum / Minimum), the HOLD, the mean measurement, differential measurement, and alarm (high / low) functions.


- Measuring range: -40 ... 800°C / -40 ... 1472°F
- Background illuminated display
- Optical resolution 12: 1
- Alarm function
- Incl. ISO Calibration Certificate to 500°C / 932°F

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HPT 1

The temperature meter with microprocessor is a high precision 1-channel temperature gauge. The temperature meter with microprocessor is ideal for use with various Pt100 sensors. Due to the fact that it uses 4-wire technology, it has a very fast response time and precision. Each temperature meter comes manufacturer calibrated and can be certified according to the ISO standards as an option.

- 1 channel temperature recorder
- Automatic shutdown
- High accuracy of ± 2% r.H.
- Sampling rate of 2 / sec
- Memory size: 5,000 values

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-ITF 10

PCE-ITF 10 is a portable handheld infrared temperature gun meter, thermometer or laser pyrometer that uses an infrared (IR) sensor to measure temperature in degrees Celsius (°C) or Fahrenheit (°F) without contact. This non-contact IR temperature meter can be used to detect leaks in walls, ducts, ventilation systems and more.


- Measuring range: -50 ... 380°C / -58 ... 716°F
- Accuracy: ± 3% -50 ... 20°C / -58 ... 68°F
                 ± 1% / ± 1°C / 1.8°F, 20 ... 380°C / 68 ... 716°F
- Optical resolution: 20:1
- Spectral range: 8 ... 14 μm
- Fixed emissivity: 0.95

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-JR 911

The PCE-JR-911 temperature meter with Thermometer is a versatile tool in that it can measure the temperature of objects without contact and readings can be stored in memory and transferred to a computer by way of its RS-232 interface and software. This temperature meter comes complete with a Thermometer, allowing the user to program specific time intervals for taking measurements, such as over an entire week. Each temperature meter comes manufacturer calibrated and can be certified according to the ISO standards as an option.


- Temperature range: -40 to 500°C / -40 ... 932°F
- Resolution: 0.1°C / 0.18°F
- Accuracy: ±2% of reading or ±2°C / 3.6°F
- Optical resolution: 8:1
- Emissivity: 0.3 to 1.0 (adjustable)
- Interface: RS-232
- Display: LCD

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-IR 100

PCE-IR 100 is both an infrared non-contact thermometer for measuring surface temperature and a contact thermometer with probe for measuring core temperature of food. This food-grade thermometer allows for quick and easy testing of food surface temperatures without contamination using the infrared sensor, while also offering the possibility of testing food internal temperatures using the food-quality sensor probe.


- Infrared temperature range: -33 ... 220ºC / -27 ... 428ºF
- Probe temperature range: -55 ... 330ºC / -67 ... 626ºF
- Resolution: 0.2ºC / 0.36ºF
- IP 65 ingress protection rating allows hygienic cleaning

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-889B

The temperature meter is suitable for private and industrial use because of its price-performance ratio. An infrared temperature meter is a contactless measuring device. The bright laser dots from infrared instruments are clearly visible and provide easier temperature measurement from a distance.


- Optical resolution 30:1
- Measuring range of -50 ... 1000°C / -58 ... 1832°F
- Maximum value display
- Adjustable emissivity 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-779N

The PCE-779N measures temperatures quickly and without contact. The PCE-779N can be used for almost all surfaces. The emissivity of the Temperature Meter is adjustable over the range of 0.1 ... 1.0. The Temperature Meter has various measurement functions such as max, min and average measurement. Each temperature meter comes manufacturer calibrated and can be certified according to the ISO standards as an option. In general our laboratory adjusts the temperature meter to two (linear) temperature points.


- OLED-Display
- Measuring range: -60 ... 760°C / -76 ... 1400°F
- Additional thermocouple measurement -64 ... 1400°C / -83.2 ... 2552°F
- Dual Laser
- Resolution: 0.1°C / 0.18°F at -83.2 ... 999.9°C (-117.8 ... 1831.8°F), otherwise 1°C / 1.8°F 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VA 11

The Air and Temperature Meter PCE-VA 11 is an extensively used measuring instrument. This temperature meter offers the opportunity to determine air speeds, air temperature and infrared temperature. The illuminated LCD allows comfortable readings and facilitates use in dimly lit areas.


- Air speed range: 0.4 ... 30 m/s / 0.9 ... 67 mph
- Air flow range: 0 ... 9999 CFM / CMM
- Air temperature range: -10 ... 60°C / 14 ... 140°F
- IR temperature range: -50 ... 500°C / -58 ... 932°F

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VA 20

PCE-VA 20 is a multifunction temperature meter for testing heating, ventilation and air conditioning or cooling (HVAC) systems. This combination anemometer-hygrometer-thermometer features a 10 cm / 3.9" Ø fan impeller, easy-to-read backlit LCD, and functions such as display hold, average value, maximum value, minimum value, battery-saving automatic power off, low-battery indicator, and metric or imperial unit selection.


- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
  point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of
  measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-895

The dual infrared temperature meter is used for fast surface temperature measurement. The two laser points of the infrared temperature meter PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement. 

 

- Temperature measurement up to 1600°C / 2912°F
Cross laser thermometer
K-Type or infrared measurement
- Optical resolution: 60:1
- Adjustable emissivity
- Can be calibrated
- Suitable for long-term measurements

Manufacturer: PCE Instruments
Test Instruments manufacturer