Industrial Measurement Products and Solutions

Power Meter

Order no.: C.A 8336

The C.A. 8336 power meter is particularly suitable for maintenance and inspection services in industrial or commercial installations or in public facilities. The power meter provides an instant image of the main network parameters and network quality.

 

- 5 voltage and 4 current inputs
- Inrush mode up to 10 minutes
- Calculation of distortion performance
- Harmonics up to 50th order

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: PCE-N30P
The Power Meter PCE-N30P can determine the most important system parameters of a single-phase network. Based on the current and voltage, the Power Meter PCE-N30P calculates the apparent, active and reactive power, as well as the phase difference angle and the power factor. The Power Meter can also determine the average power for a 15 minute period and the average voltage for a 10 minute period.

- Input: 0.02...6 A / 0...480 V / 45.00...100.00 Hz
- Accuracy: 0.2 %
- IP65 protected front
- two alarm outputs

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N30P-1
Power Meter with one phase measurement for all parameters: voltage, current, etc.
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N30P-3
Power Meter with one phase measurement for all parameters: voltage, current, etc.
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N30P-4
Power Meter with one phase measurement for all parameters: voltage, current, etc.
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PA6000

The power meter PCE-PA6000 power analyzer can be used as a desktop or portable instrument for measuring active power, apparent power, power factor, energy consumption, AC voltage, AC current, DC voltage, DC current, resistance and frequency. The power / performance measurement can be performed with this power analyzer either directly with the supplied test leads, or indirectly by current clamps.


- Performance
- Power factor
- AC voltage and current
- DC voltage and current, resistance and frequency

- Incl. software, data cable and test Leads

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-360

The PCE-360 is a Power Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


- Voltage range: 50.0 V ... 600.0 V True RMS value
- Current range: 3.0 A ... 999.9 A True RMS value
- Includes clamps, clips, leads, PC software and data cable

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PA 8300

The easy-to-use PCE-PA 8300 Power Meter is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:


- Voltage measurement range of 10 V ... 600 V AC
- Current measurement range of (Set 1) 20 A ... 1200 A AC or (Set 2) 30 A ... 3000 A AC
- Performance measurement range of 0 kW ... 9.999 MW (VA/VAR)
- Simultaneous display of harmonics and waveform
- Graphic Phasor diagram
- Captures transients including dip, swell, and outage

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: Easycount-1-CEE-U

The Easycount-1-CEE-U energy meter is an electricity meter for alternating voltages up to 230 V, enclosed in a splash-proof and impact-resistant housing. The cable ends of the Easycount-1-CEE-U energy meter are equipped with male and female connectors.


- Uncalibrated counter
- Voltage input: 230 VAC
- Current rating: 16 A
- Frequency: 50 HZ

 

Manufacturer: J. Schell GmbH
Test Instruments manufacturer
Order no.: Easycount-1-Schuko-U

The Easycount-1-Schuko-U energy meter is an electricity meter for alternating voltages up to 230 V, enclosed in a splash-proof and impact-resistant housing. The cable ends of the Easycount-1-Schuko-U energy meter are equipped with male and female connectors.


- Uncalibrated counter
- Voltage input: 230 VAC
- Current rating: 16 A
- Frequency: 50 HZ

 

Manufacturer: J. Schell GmbH
Test Instruments manufacturer
Order no.: Easycount-1-CEE-G

The Easycount-1-CEE-G energy meter is an electricity meter for alternating voltages up to 230 V, enclosed in a splash-proof and impact-resistant housing. The cable ends of the Easycount-1-CEE-G energy meter are equipped with male and female connectors.


- Calibrated counter
- Voltage input: 230 VAC
- Current rating: 16 A
- Frequency: 50 HZ

 

Manufacturer: J. Schell GmbH
Test Instruments manufacturer
Order no.: Easycount-1-Schuko-G

The Easycount-1-Schuko-G energy meter is an electricity meter for alternating voltages up to 230 V, enclosed in a splash-proof and impact-resistant housing. The cable ends of the Easycount-1-Schuko-G energy meter are equipped with male and female connectors.


- Calibrated counter
- Voltage input: 230 VAC
- Current rating: 16 A
- Frequency: 50 HZ

 

Manufacturer: J. Schell GmbH
Test Instruments manufacturer
Order no.: Easycount-3

The EasyCount three-phase Power Meter is an energy meter embedded in a case protected against water, for three-phase current up to 400 V. The wires of the three-phase Power Meter, with a length on both sides of approx. 50 cm, have a male CEE connector and a female connector.


- 3 x 230/400 V AC
- Current-carrying capacity/ampacity 16 A or 32 A
- Rated IP54
- Resolution of 0.1 kWh
- 6 W minimum power

 

Manufacturer: Günther Schell GmbH & Co. KG
Test Instruments manufacturer
Order no.: C.A 8230-AmpFlex-450

The 1-phase Power Meter C.A 8230 is designed specifically for the electrical trade, for installers and customer engineers. The 1-phase Power Meter is due to its large variety of measuring facilities applicable for training- and educational purposes as well.


- TRMS-measurement
- Power measuring from 30 A ... 6500 A
- Crest factor detection
- Harmonic up to 50th order

 

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: C.A 8230-MN93A

The 1-phase Power Meter C.A 8230 is designed specifically for the electrical trade, for installers and customer engineers. The 1-phase Power Meter is due to its large variety of measuring facilities applicable for training- and educational purposes as well.


- TRMS-measurement
- Power measuring from 5 mA ...120 A
- Crest factor detection
- Harmonic up to 50th order 

 

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer