PCE Instruments

Paint Gauge / Paint Tester

Order no.: PCE-CT 65

PCE-CT 65 is a paint thickness gauge that uses magnetic induction (ferrous) or eddy current (non-ferrous) to take non-destructive measurements of coating and dry film thickness (DFT) on metal substrates such as steel and aluminum. This thickness gauge is ideal for painted and powder-coated surface testing, automotive paint inspection, coated material testing, and manufacturing quality control applications.


- Measuring range of 0 ... 1350 µm / 0 ... 53 mils
- Accuracy of ±2.5 % or 2 µm (whichever is greater) for 0 ... 1000 µm / ±3.5 % for 1000 µm ... 1350 µm / ±2 % or ± 0.08 mils (whichever is greater) for 0 ... 39.3 mils / ±3.5 % for 39.3 mils ... 53.1 mils
- Saves up to 1500 measurements to memory

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 65-ICA

PCE-CT 65 is a paint thickness gauge that uses magnetic induction (ferrous) or eddy current (non-ferrous) to take non-destructive measurements of coating and dry film thickness (DFT) on metal substrates such as steel and aluminum. This thickness gauge is ideal for painted and powder-coated surface testing, automotive paint inspection, coated material testing, and manufacturing quality control applications.


- Measuring range of 0 ... 1350 µm / 0 ... 53 mils
- Accuracy of ±2.5 % or 2 µm (whichever is greater) for 0 ... 1000 µm / ±3.5 % for 1000 µm ... 1350 µm / ±2 % or ± 0.08 mils (whichever is greater) for 0 ... 39.3 mils / ±3.5 % for 39.3 mils ... 53.1 mils
- Saves up to 1500 measurements to memory
- incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 100

PCE-CT 100 is a paint and coating thickness measuring instrument used to quickly and easily determine coating thicknesses on ferrous (Fe) and non-ferrous (nFe) metals. This compact handheld coating thickness gauge uses magnetic induction (ISO 2178) and eddy current (ISO 2360) coating thickness measurement methods to take non-destructive measurements of coating and dry film thickness (DFT) on metal substrates such as steel and aluminum.


- Measuring range: Depends on choice of sensor probe - sold separately
- Resolution: 0.1 μm or < 0.2% of measured value
- Saves up to 100,000 measurements to memory
- Interfaces: USB 2.0, Bluetooth 4.0
- Displays measuring units in μm, mm or mils
- Includes factory calibration certificate according to ISO 9001

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 5000H

PCE-CT 5000H is a paint thickness measuring instrument used for the rapid determination of coating thicknesses on ferrous (Type F) and non-ferrous (Type N) metals. The paint and coating thickness gauge automatically detects the type of metal to be measured.


- Type F measuring range: 0 ... 5000 µm / 0 ... 5 mm / 0 ... 196 mils
- Type N measuring range: 0 ... 3000 µm / 0 ... 3 mm / 0 ... 118 mils
- Displays measuring units in μm, mm or mils
- Saves up to 2000 measurements to internal memory
- Practical V-groove on the measuring head

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 5000H-ICA

PCE-CT 5000H is a paint thickness measuring instrument used for the rapid determination of coating thicknesses on ferrous (Type F) and non-ferrous (Type N) metals. The paint thickness gauge automatically detects the type of metal to be measured.


- Type F measuring range: 0 ... 5000 µm / 0 ... 5 mm / 0 ... 196 mils
- Type N measuring range: 0 ... 3000 µm / 0 ... 3 mm / 0 ... 118 mils
- Displays measuring units in μm, mm or mils
- Saves up to 2000 measurements to internal memory
- Practical V-groove on the measuring head
- Incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 28

The PCE-CT 28 Paint Gauge for cars is for measuring the thickness of paint and plastic on ferrous or non-ferrous materials without damaging the coating's surface. The Paint Gauge stands out due to its high range of measurement.


- Measurement range: 0 ... 1250 µm / 49.2 mils
- Resolution: 0.1 µm / 0.004 mils (in a range of 0.0 µm ... 99.9 µm / 3.9 mils)
  1 µm / 0.04 mils (above the range)
- Accuracy: ± 2% or 2.5 µm / 0.1 mils (highest reading is valid)
- Display: LCD with 4 mm x 10 mm (0.2 in x 0.4 in) high digits

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 28-ICA

The PCE-CT 28 Paint Thickness Gauge for cars is for measuring the thickness of paint and plastic on ferrous or non-ferrous materials without damaging the coating's surface. The Paint Thickness Gauge stands out due to its high range of measurement.


- Measurement range: 0 ... 1250 µm / 49.2 mils
- Resolution: 0.1 µm / 0.004 mils (in a range of 0.0 µm ... 99.9 µm / 3.9 mils)
  1 µm / 0.04 mils (above the range)
- Accuracy: ± 2% or 2.5 µm / 0.1 mils (highest reading is valid)
- Display: LCD with 4 mm x 10 mm (0.2 in x 0.4 in) high digits
- Incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 27FN

PCE-CT 27FN is a Paint Gauge that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on metal substrates such as steel and aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 0 ... 1250 µm / 0 ... 50 mils
- Accuracy of ± (2% + 2 µm) / ± (2% + 0.1 mils)
- Features a resolution of 0.1 µ / 0.1 mils

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 27FN-ICA

PCE-CT 27FN is a Paint Thickness Gauge that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on metal substrates such as steel and aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 0 ... 1250 µm / 0 ... 50 mils
- Accuracy of ±(2 % + 2 µm) / ±(2 % + 0.1 mils)
- Features a resolution of 0.1 µ / 0.1 mils
- incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 5000

The PCE-CT 5000 Paint Gauge is an instrument for a nondestructive thickness measurement of coatings, such as varnishes, paints, etc. on steel / iron and non-ferrous metals. The extremely wide measuring range of the Paint Gauge goes up to 5000 µm or 200 mils. Gumming or plastic coatings for shock and impact protection can be controlled just as the thin paint coatings.


- Measuring range: 5000 µm / 196.8 mils
- Ferrous metals (Fe)
- Non-ferrous metals (NFe)
- Accuracy: ± 2 % or 2.5 µm / 0.1 mils (the highest value is valid)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 5000-ICA

The PCE-CT 5000 Paint Thickness Gauge is an instrument for a nondestructive thickness measurement of coatings, such as varnishes, paints, etc. on steel / iron and non-ferrous metals. The extremely wide measuring range of the Paint Thickness Gauge goes up to 5000 µm or 200 mils. Gumming or plastic coatings for shock and impact protection can be controlled just as the thin paint coatings.


- Measuring range: 0 ... 5000 µm / 0 ... 196.8 mils
- Ferrous metals (Fe)
- Non-ferrous metals (NFe)
- Accuracy: ± 2 % or 2.5 µm / 0.1 mils (the highest value is valid)
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 40

The PCE-CT 40 is a Paint Tester that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only ferrous metal substrates such as steel. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 0 ... 5000 µm / 200 mil
- Accuracy of ± (1 µm / 0.04 mils + 2 %) of 0 ... 999 µm ( 40 mils) / ± 3.5 % of
  1001 µm to 5000 µm (40 mils ... 200 mils)
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 40-ICA

The PCE-CT 40 is a Paint Tester that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only ferrous metal substrates such as steel. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 0 ... 5000 µm / 200 mil
- Accuracy of ± (1 µm / 0.04 mils + 2 %) of 0 ... 999 µm ( 40 mils) / ± 3.5 % of
  1001 µm to 5000 µm (40 mils ... 200 mils)
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm
- incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 50

PCE-CT 50 is a Paint Tester that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, copper,  brass, zinc, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils ±3.5 % of
  1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 50-ICA

PCE-CT 50 is a Paint Tester that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, copper,  brass, zinc, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils ±3.5 % of
  1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 30

The PCE-CT 30 is a Paint Tester that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on metal substrates such as steel and aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 0 ... 3500 µm / 140 mil
- Accuracy of ± (1 µm / 0.04 mils + 2 %) of 0 ... 999 µm (40 mils) / ± 3.5 % of
  1001 µm ... 3500 µm (40 mils ... 140 mils)
- Features a resolution of 0.1 µm / 0.01 mil / 0.01 mm

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 30-ICA

The PCE-CT 30 is a Paint Tester that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on metal substrates such as steel and aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.

 
- Measuring range of 0 ... 3500 µm / 140 mil
- Accuracy of ± (1 µm / 0.04 mils + 2 %) of 0 ... 999 µm (40 mils) / ± 3.5 % of
  1001 µm ... 3500 µm (40 mils ... 140 mils)
- Features a resolution of 0.1 µm / 0.01 mil / 0.01 mm
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 25

The PCE-CT 25 Paint Gauge is used for quickly detecting the thickness of metals, such as steel and iron (F) as well as non-ferrous metals (N) in the automotive sector. The PCE-CT 25 Paint Gauge is used to detect damages in cars (the coating thickness of paint can say if the car has suffered any damage) to establish if the car has been in an accident and the resulting value of the car in the used car market.


- Measurement range: 0 µm ... 1000 µm / 40 mils
- Resolution: 0.1 mils / 1 µm
- Display: 3 1/2 digit LCD display
- Operating conditions: 0 ... 50°C / 32 ... 122°F 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PosiPen

Paint Gauge PosiPen has a very small, unique magnet which can be placed with pin-point accuracy on extremely small parts, and on peaks and valleys. Ideal for measuring non-magnetic coatings such as paint, enamel, plating, hot-dip galvanizing on steel.


- Measuring Range: 0.25 to 20 mils / 5 to 500 microns
- Tolerance: +/- 10% and 0.1 mils / +/- 10% and 2.5 microns
- Temperature: - 150 °F to + 450 °F / - 100 °C to + 230 °C

 

Manufacturer: DeFelsko Corporation
Test Instruments manufacturer
Order no.: PT-6000 Standard

The Coating Thickness Gauge PT-6000 standard with monochrome display is a simple, robust, accurate, versatile and powerful instrument for the measurement of all metal substrates. The Coating Thickness Gauge is suitable for the measurement of color, powder coating, etc. on all metals and for the measurement of anodizing, chrome, zinc, galvanic coatings and much more.


- Robust housing and electronics
- Large variety of probes (not included!)
- Monochrome backlit display
- Data memory for up to 250 measurements

 

Manufacturer: DeFelsko Corporation
Test Instruments manufacturer