Industrial Measurement Products and Solutions

Moisture Tester for Wood

Order no.: PCE-HGP

PCE-HGP is a multifunction moisture tester for wood that uses penetrating pins to measure the moisture content of wood and other construction or building materials. PCE-HGP also measures the relative humidity (RH) and ambient temperature and calculates the dew point temperature of the air.


- Material moisture measuring range: 6% ... 60%
- RH measuring range: 0% ... 100%
- Air temp. measuring range:  -5 ... 50ºC / 23 ... 122ºF
- Dew point temp. measuring range: -9 ... 50ºC / 16 ... 122ºF
- Measures 3 wood groups (12 types + 270 exotic types)  

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WMH-3

PCE-WMH-3 is a portable handheld digital moisture tester or analyzer used to measure the moisture content of wood. This hammer-style wood moisture analyzer features preset characteristic curves for measuring moisture in 270 different wood types.


- Measuring range: 6 ... 60 % moisture content
- Accuracy: ±1 % (within 6 ... 12 % range), ±2 % (13 ... 28 %), ±2 % (29 ... 60 %)
- Resolution: 0.1 %

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MMK 1

PCE-MMK 1 is a portable handheld digital moisture meter used to measure the moisture content of wood, paper, textiles, concrete and other building materials. This multifunction moisture tester for wood also measures ambient temperature and ambient relative humidity.


Measuring ranges:
- Wood, paper, textiles: 1 ... 75% moisture
- Concrete, building materials: 0.1 ... 2.4% moisture
- Ambient temperature: -40 ... 70°C / -40 ... 158°F
- Ambient relative humidity (RH): 0 ... 100 % RH

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WP24

PCE-WP24 is a moisture tester or meter for wood used to perform noninvasive, nondestructive moisture measurements of wood, timber and other construction or building materials. An ideal tool for assessing everything from lumber to floors and more, this moisture meter uses electromagnetic waves that penetrate approximately 50 mm / 1.96 inches to 60 mm / 2.36 inches deep (depending on substrate) to return a mean-value moisture content percentage.


- Moisture content measuring range: 4% ... 60% wood, 0% ... 10% building
  materials
- Resolution: 0.1%
- Accuracy: ±0.7%

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WT1N

The Moisture Tester for wood is designed for professional use in the control output of sawmills in the input or control of pellet mills, manufacturers of heating briquettes and other branches of production. The Moisture Tester for wood determines the absolute moisture of sawdust and other types of biomass, such as Wood shavings, hay, straw.


- Fast moisture control
- Electrical resistance methods
- For biomasses such as straw, hay, sawdust, etc.
- Sample size up to approx. 120 cm³

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MA 50X
The moisture tester for wood PCE-MA 50X is an innovative solution for the fast and highly accurate determination of moisture in a wide variety of materials. The precision weighing scale uses weighing technology from the analytical balance range and is operated in combination with a drying chamber.

- Weighing range: 50 g / 0.11 lbs
- Readability: 0.1 mg = 0.0001 g / 0.001%
- Especially for very dry samples such as ABS / PET etc.
- Drying temperature max. 160°C / 320°F
- Database with drying parameters for eg ABS, Crastin, Aramid...
- Stores the measurement data of the last 5,000 drying cycles
- Non-contact control thanks to IR sensors
Manufacturer: RADWAG Waagen GmbH
Test Instruments manufacturer
Order no.: FMW-T

The Moisture Tester for Wood FMW-T covers all your needs while measuring moisture contents in all types of wood and building materials. The Moisture Tester for Wood works without causing any damage to the material and it is mainly used to measure building walls.


- Measurement range: 2 ... 30 % H2O wood / 0 ... 60 % building materials
- Resolution: 0.1 %
- ±0.5 % accuracy of reference material
- Memory: 50 measurement values
- Upper frontal sensor
- Non destructive measurement 

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: FMW-B

The Moisture Tester for Wood FMW-B determines moisture content by means of the capacitive method. With the Moisture Tester for Wood an electromagnetic field quickly determines capacitance of wood.


- Measurement range: 2 ... 30% H2O wood / 0 ... 60% building materials
- Resolution: 0.1%
- Accuracy: ±0.5% of the reference material
- Memory: 50 measurement values
- Lower frontal sensor
- Non-destructive measurement

 

Test Instruments manufacturer
Order no.: FMD 6

The FMD 6 is a handy and versatile moisture tester for wood for reliable measurement of the moisture content of paper, wood and construction materials. The moisture tester for wood has preset characteristic curves for the moisture measurement of specific materials. The moisture tester needs external sensors (sold separately - please see accessory list) to operate. The sensors can be positioned on the surface of a material or inserted into a material, thereby permitting either non-destructive or destructive measurement.


- Measuring range: 5-99% for wood / 0-99% for building materials
- Resolution: 0.1%
- Accuracy: ±0.2%
- Memory stores up to 1,000 measurement values for transfer to PC using
  included software

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: BLL-1

Moisture analyzer with stick-in probe (1 meter length) for precise determination of water content in timber. The Analyzer is equipped with a datalogger. Easy to use moisture analyzer: Plug the probe into the wood chip pile, switch on the test instrument and read out the water content in %. The measurement data can be stored in the moisture Analyzer itself and later on sent to a laptop or PC. The instrument is delivered manufacturer calibrated and can be certified to ISO.


- Length of insertion probe: 1 m
- Measuring range 10 ... 50 % water content
- Resolution 0.5 % water content
- Sample temperature measurement
- Automatic temperature compensation
- Languages: English, German, Italian, French, Spanish and Russian

 

Manufacturer: Messtechnik Schaller GmbH
Test Instruments manufacturer