Industrial Measurement Products and Solutions

General Accessories

Order no.: FOS-850/1300

- A variety of light sources allow you to test different cable lengths
- One year warranty

 

£ 558.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: 80CJ-M

- Isothermal screw terminal for J wire
- Suitable for up to 20 gauge thermocouple wire
- Color coded to industry standards (J-black)
- Two per package
- One year warranty

 

£ 16.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: C10

- Snap-on yellow holster absorbs shocks and protects meter from rough
  handling

- Includes built-in stand and hanger loop
- One year warranty

 

£ 18.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: H80M

Now 80 Series owners can benefit from the Fluke Magnetic Hanging System. The easy-to-clean, snap-on holster absorbs shocks and protects your DMM, and is especially designed to hang from just about any metal surface. Set includes:


- Yellow protective holster for all 80 series DMM's (new as well as old)
- General purpose hanger
- Hook and loop straps
- Hanging magnet

 

£ 33.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: TP82

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding due to design.


- Banana jack accepts all DMM and banana jack leads
- Non-rotating banana jack prevents leads from tangling, allowing you to
  tighten/loosen clamp while still connected to the test lead
- For use with test leads with 2 mm probes
- Tested to 60 V DC

 

£ 37.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: C520A

- Oiled genuine top grain cowhide
- Oil tanned for long life
- Rugged construction with heavy duty stitching and reinforced rivets
- Large tool belt loop and top flap to secure tester
- Holds Fluke Electrical Testers

 

£ 41.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: C100

- Tough polyprophylene case
- 1 year warranty

 

£ 47.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: TL238

An accessory kit especially designed for working in high energy enviroments. The SureGrip™ Test Probe has only 4 mm of exposed metal at the tip. Test probes with less exposed metal help reduce the risk of inadvertant shorts between each other and other metal surfaces that could result in an arc flash explosion.


The kit includes:
- TP238 SureGrip™ Insulated Test Probe Set
- TP280 SureGrip™ Test Probe Extender
- TL224 SureGrip™ Silicone Right Angle/Straight Test Lead Set

 

£ 50.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: 80PK-22

- Type-K thermocouple for use in liquids and gels
- Measurement range: -40 to 1090 °C
- One year warranty

 

£ 69.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: TL225-1

Handy all-in-one kit that includes:


- AC220 SureGrip™ Alligator Clip Set
- TP238 SureGrip™ Insulated Test Probe Set
- TL224 SureGrip™ Silicone Test Lead Set (straight to right)
- One year warranty

 

£ 69.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: TLK287

The perfect test lead kit for today’s electronics test and design.


Includes:
- Precision electronic probes with multiple spring-loaded sharp tips to maximize
  contact with SMD test points
- Micro-grabbers and leads to enable fine SMD test
- Mini-alligator clips, grabbers, and probes for virtually every electronics need

 

£ 117.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: DMS 0100/INST/PROF

FLUKE DMS software - a complete solution. The FLUKE DMS (data management software) is an efficient software for data recording and admiration of test results for electrical installation or portable appliance testing. Available is the software FLUKE DMS as the module DMS 0100/INS for the electrical installation testing and DMS 0702/PAT for the appliance testing.


- Features from Fluke DMS 0100/INST (mentioned above)
- Admiration of user authorisation for four different user groups
- Comparision and update of different DMS databases
- Evaluation of test results for installation test
- Ideal software for service providers or facility management

 

£ 359.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: i1000s

The Fluke i1000s is a clamp-on ac current probe designed to expand oscilloscope applications in industrial and power environments. Ideal for measuring distorted current waveforms and harmonics. This Current Probe provides the following features:


- Allows accurate measurement of currents from 100 mA to 1000 A rms, 5 Hz to
  100 kHz
without breaking into the circuit
- A passive filter eliminates noise and ring on rapidly rising di/dt waveform,
  ensuring accurate screen displays
- Connects directly to an oscilloscope through a reinforced coaxial cable and an
  insulated BNC connector
- Can be used with Multimeters with optional PM9081/001 BNC/Banana adapter
- One year warranty

 

£ 430.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PSi50s

Bench Power Supply for Fluke i50s 50MHz Current Probe.


- Nominal VA Rating: 46 VA
- AC/V Input: Bivoltage 115/230 VAC with manual Selector
  On 115 VAC : 115 VAC nominal (103 VAC...127 VAC)
  On 230 VAC : 230 VAC nominal (207 VAC…253 VAC)
- AC/V Frequency Range: 44...60 Hz
- Nominal Rated Input Current: 200 mA / 230 VAC, 400 mA / 115 VAC
- Output Voltage: +/- 12 VDC +/- 0.5 VDC

 

£ 522.00

Price excl. VAT &. delivery
2 year Warranty