PCE Instruments

Force Gauge / Digital Force Gauge

Order no.: 844

This ring force gauge allows you to record and display the axial and bearing forces. The display of the ring force gauge is a very accurate and large dial gauge, scaled in kN.


- Measuring range 0 N ... 1000 kN (depending on model)
- For measuring axial and bearing forces
- Made of stainless steel
- Display in Kilonewton


Please make your selection in the technical data or in the shopping cart.

Manufacturer: Erichsen GmbH & Co. KG
Test Instruments manufacturer
Order no.: PCE-FM 200
The force gauge PCE-FM 200 is a handheld device that measures up to 200 N. The force gauge PCE-FM 200 can determine the units N, kg and lb. The PCE-FM 200 force gauge is supplied with various adapters that have different shapes. The force gauge PCE-FM 200 can measure both tensile and compressive forces.


- Measuring range: 0 ... 200 N
- Measurement accuracy: ±0.5 %
- Units: N, KG, lb
- Integrated load cell with M6 connection
- Evaluation via USB interface
- Including evaluation software
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FM 500N
The PCE-FM 500N force gauge is a microprocessor controlled dynamometer with fast and accurate readout of tensile and compressive forces in N, Kg and lb. The display of the force gauge is easily readable by the large numbers. The force gauge is equipped with an internal load cell for tensile and compression tests.

- Measuring range: 0 ... 500 N / 0 ... 112 lbs
- Resolution: 0.1 N / 0.02 lbs
- Differently shaped measuring adapter
- Evaluation via USB interface
- Device for mounting on test stands
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FM 50N
This force gauge is a tensile / compressive force gauge. This traction / compression force gauge has an internal load cell. It is a portable traction / compression force gauge that can be installed in a force measurement stand.

- Measuring range: 0 ... 50 N / 0 ... 11 lbs
- Resolution: 0.01 N / 0.002 lbs
- Evaluation via USB interface
- differently shaped measuring adapter
- Device for mounting on test stands
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PTR 200N
The PCE-PTR 200N force gauge is a hand-held device up to 200 N. The PCE-PTR 200N force gauge can determine the units N, kg and lb. The PCE-PTR 200N force gauge comes with various shaped adapters. With the PCE-PTR 200N force gauge both tensile and compressive forces can be measured.

- Measuring range: 0 ... 200 N / 0 ... 45 lbs
- Measurement accuracy: ± 0.5%
- Units: n, kg, lb
- Integrated load cell with M6 connection
- Evaluation via USB interface
- Including evaluation software
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FM 200-ICA
The force gauge PCE-FM 200 is a handheld device that measures up to 200 N. The force gauge PCE-FM 200 can determine the units N, kg and lb. The PCE-FM 200 force gauge is supplied with various adapters that have different shapes. The force gauge PCE-FM 200 can measure both tensile and compressive forces. This force gauge comes with an ISO calibration certificate (PCE-FM 200-ICA).


- Measuring range: 0 ... 200 N
- Measurement accuracy: ±0.5 %
- Units: N, KG, lb
- Integrated load cell with M6 connection
- Evaluation via USB interface
- Including evaluation software
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LFG 10

The PCE-LFG 10 Force Gauge brings force measurement technology to the user on site. The digital Force Gauge is made for tensile and compressive force measurements and has a measuring range of 10 N / 2.2 lbs. The Force Gauge is suitable for precise measurements with its high resolution of 0.001 N / 0.0002 lbs.


- Measuring range: 0 ... 10 N / 0 ... 2.2 lbs
- Resolution: 0.001 N / 0.0002 lbs
- Accuracy: ± 0.1% F.S.
- Memory size: 1,000 values
- RS-232 / USB interface
- Illuminated control panel
- Included calibration certificate

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LFG 5

The PCE-LFG 5 Force Gauge brings force measurement technology for the user on site. The digital Force Gauge for tensile and compressive force measurements can be used up to a measuring range of 5 N / 1.1 lbs. The Force Gauge with its high resolution of 0.0005 N / 0.0001 lbs is suitable for precise measurements. As a precision testing tool, this kind of test instrument comes manufacturer calibrated and is also ISO certificated.


- Measuring range 5 N / 1.1 lbs
- Resolution 0.0005 N / 0.0001 lbs
- Tensile and compressive force measurement
- High measuring accuracy
- Illuminated control panel
- Incl. calibration certificate

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 3WI

The PCE-DDM 3WI Force Gauge is the ideal tool for measuring strong tensile forces. The PCE-DDM 3WI Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 3000 kg / 30 kN
- Resolution: 1 kg / 10 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control / indicator

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 5WI

The PCE-DDM 5WI Force Gauge is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 5WI Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 5000 kg / 50 kN
- Resolution: 2 kg / 20 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control indicator

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG N 10
Digital force gauge PCE-DFG N 10 for tensile force measurement and force measurement up to 10 N. The PCE-DFG N 10 is a digital dynamometer for precise measurements with a resolution of 0.005 N. The Force gauge PCE-DFG N 10 can be purchased here in our shop.

- Measuring range: 0 ... 10 N, 0 ... 2.25 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG N 20
Digital force gauge PCE-DFG N 20 for tensile force measurement and force measurement up to 20 N. The PCE-DFG N 20 is a digital dynamometer for precise measurements with a resolution of 0.01 N. The force gauge PCE-DFG N 20 can be found here in our shop to buy. 

- Measuring range: 0 ... 20 N, 0 ... 4.5 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG N 200
Digital force gauge PCE-DFG N 200 for tensile force measurement and pressure force measurement up to 200 N. The PCE-DFG N 200 is a digital dynamometer for precise measurements with a resolution of 0.1 N. The Force gauge PCE-DFG N 200 can be found here in our shop to buy.

- Measuring range: 0 ... 200 N, 0 ... 44.96 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG N 5
Force Gauge PCE-DFG N 5 for tensile force measurement and force measurement up to 5 N. The PCE-DFG N 5 is a digital dynamometer for precise measurements with a resolution of 0.001 N. The Force Gauge PCE-DFG N 5 can be purchased here in our shop.

- Measuring range: 0 ... 5 N, 0 ... 1.12 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG N 500

Digital force gauge PCE-DFG N 500 for tensile force measurement and pressure force measurement up to 500 N. The PCE-DFG N 500 is a digital force gauge PCE-DFG N 500 for precise measurements with a resolution of 0.1 N.

- Measuring range: 0 ... 500 N
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 3

The PCE-DDM 3 Force Gauge is the ideal tool for measuring strong tensile forces. The PCE-DDM 3 Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 3000 kg / 30 kN
- Resolution: 1 kg / 10 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 5

The PCE-DDM 5 Force Gauge is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 5 Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty aluminum. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 5000 kg / 50 kN
- Resolution: 2 kg / 20 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG N 1K
The PCE-DFG N 1K force gauge measures both tensile forces and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch. The force gauge PCE-DFG N 1K can be purchased here in our online shop.

- Measuring range: 0 ... 1,000 N / 0 ... 225 lbs
- Resolution: 0.5 N / 0.11 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG N 2.5K
The PCE-DFG N 2.5K force gauge measures both tensile forces and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, the force required to push a button or switch. You can buy the force gauge PCE-DFG N 2.5K here in our online shop. 

- Measuring range: 0 ... 2,500 N / 0 ... 562 lbs
- Resolution: 1 N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DFG N 5K
The force gauge PCE DFG N 5K measures both tensile and compressive forces with a very high resolution. The tensile force and the compressive force are often determined in the laboratory, for example, to determine the yield, the breakaway force, and the force required to push a button or switch. You can buy the force gauge PCE-DFG N 5K here in our online shop. 

- Measuring range: 0 ... 5,000 N / 0 ... 1,124 lbs
- Resolution: 1 N / 0.22 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- USB interface
- Graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer