PCE Instruments

Food / Hygiene

Order no.: PCE-ATP 1

PCE-ATP 1 is a food safety / hygiene - ATP tester, ATP meter, lumitester or luminometer used for surface testing. This luminometer allows for quick and easy first-generation adenosine triphosphate (ATP) testing and monitoring to ensure proper cleanliness, sterilization and sanitization. PCE-ATP 1 is an ATP tester that can be used for cleanliness control and documentation in many different applications.


- Measurement range: 0 ... 999999 relative light units (RLUs)
- Stores up to 10,000 date- and time-stamped data records to internal memory
- Enables rapid detection of microbial residue

Manufacturer: PCE Instruments
Order no.: PCE-ST 1

The PCE-ST 1 Food / Hygiene Temperature Meter is a handheld digital device to measure temperature in the food sector, as for instance in meat, sausage, cheese, tomatoes, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The PCE-ST 1 Food / Hygiene Temperature is very easy to use, with small dimensions and short response time.


- Measuring range:  -40 ... 250°C / -40 ... 482°F
- Indication of max. and min. values
- Data function
- Lock for continuous operation
- Measured value in ºC or ºF 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-666

The Food / Hygiene Temperature Meter PCE-666 is a combined thermometer which can measure with or without contact. The Food / Hygiene Temperature Meter is equipped with a measuring tip and a measuring clamp. As soon as the measuring tip is unfolded, it will start a temperature measurement automatically. If this is not the case, the measuring clamp will be used for the measurement.


- Measurement values displayed in °C or °F
- Auto Power Off, Hold function
- Quick measuring sequence (short measuring time)
- Distance-to-target ratio of 1:1

 

Manufacturer: PCE Instruments
Order no.: PCE-RCM 12
The Airborne Particle-Counting Hygiene Meter PCE-RCM 12 is used for orientation testing of environmental parameters. The airborne particle-counting hygiene meter PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the airborne particle-counting hygiene meter provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... +70 °C / -4 ... +158°F
- Humidity measuring range: 0 ... 100 % r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- Interface: USB
- For orientation measurements
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SDD

PCE-SDD is a Food / Hygiene Temperature Meter with internal sensor for monitoring high-temperature processes carried out from -20 ... +140 °C / -4 ... +284 °F. Ideal for use in sterilizers, pasteurizers, autoclaves, incubators, dryers and dishwashers, this high-temperature Hygiene Meter:


- Features a food-safe, stainless steel housing (AISI 316L + PEEK)
- Boasts an IP68 dust- and water-resistance rating
- Repower pressure-tight up to 10 bar

 

Manufacturer: PCE Instruments
Order no.: PCE-SDD 10

PCE-SDD 10 is a Food / Hygiene Temperature Meter with a 10 mm / 0.39" external sensor for monitoring high-temperature processes carried out from -20 ... +140 °C / -4 ... +284 °F. Ideal for use in sterilizers, pasteurizers, autoclaves, incubators, dryers and dishwashers, this high-temperature Food Meter:


- Features a food-safe, stainless steel housing (AISI 316L + PEEK)
- Boasts an IP68 dust- and water-resistance rating
- Repower pressure-tight up to 10 bar

 

Manufacturer: PCE Instruments
Order no.: PCE-SDD 100

PCE-SDD 100 is a Food / Hygiene Temperature Meter with a 100 mm / 3.94" external sensor for monitoring high-temperature processes carried out from -20 ... +140 °C / -4 ... +284 °F. Ideal for use in sterilizers, pasteurizers, autoclaves, incubators, dryers and dishwashers, this high-temperature Hygiene Meter:


- Features a food-safe, stainless steel housing (AISI 316L + PEEK)
- Boasts an IP68 dust- and water-resistance rating
- Repower pressure-tight up to 10 bar

 

Manufacturer: PCE Instruments
Order no.: PCE-SDD 150

PCE-SDD 150 is a Food / Hygiene Temperature Meter with a 150 mm / 5.91" external sensor for monitoring high-temperature processes carried out from -20 ... +140 °C / -4 ... +284 °F. Ideal for use in sterilizers, pasteurizers, autoclaves, incubators, dryers and dishwashers, this high-temperature Food / Hygiene Meter:


- Features a food-safe, stainless steel housing (AISI 316L + PEEK)
- Boasts an IP68 dust- and water-resistance rating
- Repower pressure-tight up to 10 bar

Manufacturer: PCE Instruments
Order no.: PCE-SDD 50

PCE-SDD 50 is a Food / Hygiene Temperature Meter with a 50 mm / 1.97" external sensor for monitoring high-temperature processes carried out from -20 ... +140 °C / -4 ... +284 °F. Ideal for use in sterilizers, pasteurizers, autoclaves, incubators, dryers and dishwashers, this high-temperature Food / Hygiene Meter:


- Features a food-safe, stainless steel housing (AISI 316L + PEEK)
- Boasts an IP68 dust- and water-resistance rating
- Repower pressure-tight up to 10 bar

Manufacturer: PCE Instruments
Order no.: PCE-ATP 1-KIT
The PCE-ATP 1-KIT is used to quickly and easily check the cleanliness of surfaces. The PCE-ATP 1 displays a measurement result on the large LC display after only 10 seconds. The PCE-ATP 1 internal memory stores up to 10,000 measured data sets with time and date.

- Measuring width: 0 ... 999999 RLU
- Fast hygiene tests in just 10 seconds
- USB and Bluetooth
- Automatic calibration
- For HACCP implementation
- Data storage
- Incl. Test tube
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 10

PCE-RCM 10 is a portable handheld airborne particle-counting hygiene meter or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH).


- PM channels: PM 2.5, PM 10
- Particle sizes (in micrometers): 2.5 µm, 10 µm
- Temp. measuring range: -20 ... +70 °C / -4 ... +158 °F
- Humidity measuring range: 0 ... 100 % RH
- 2.4" full-color LCD with user-friendly graphics

Manufacturer: PCE Instruments
Order no.: PCE-MPC 10

PCE-MPC 10 is a portable handheld airborne particle-counting hygiene meter or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH).


- PM channels: PM 2.5, PM 10
- Particle sizes (in micrometers): 2.5 µm, 10 µm
- Temp. measuring range: 0 ... +50 °C / +32 ... +122 °F
- Humidity measuring range: 0 ... 100 % RH
- 2" full-color LCD with user-friendly graphics
- Integrated data logger with adjustable sampling time
- Internal memory stores up to 5000 date-and-time-stamped data sets

Manufacturer: PCE Instruments
Order no.: PCE-PCO 1

PCE-PCO 1 is an airborne particle-counting hygiene meter or dust measuring device for measuring the concentration of particles in the air. The PCE-PCO 1 handheld particle counter:


- Measures 6 sizes of particles: 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
- Offers a robust, 80 MB internal memory
- Features a large, full-color LCD display with backlight
- Includes a built-in camera for image and video recording
- Contains sensors for measuring air temperature, dew point and relative
  humidity
- Displays temperature in degrees Celsius (°C) or Fahrenheit (°F)

 

Manufacturer: PCE Instruments
Order no.: PCE-PCO 2

PCE-PCO 2 is a portable handheld airborne particle-counting hygiene meter or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature, dew point and relative humidity.


- PM channels: PM 2.5, PM 10
- Particle sizes (in micrometers): 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
- Temp. measuring range: 0 ... +50 °C / +32 ... +122 °F
- Humidity measuring range: 0 ... 100 % RH
- Built-in camera for image and video recording

Manufacturer: PCE Instruments
Order no.: PD-30

The lumitester PD-30 is an easy to use measuring instrument, which can take and store up to 2000 measurements. The device is used for hygiene monitoring in pharmaceutical and medical spheres, catering, wholesale, etc.


- Two measurement methods: ATP and AMP
- HACCP implementation
- USB interface
- Data transfer to the evaluation software
- Data memory for 2000 measurement results

 

Manufacturer: HyServe GmbH & Co. KG.
Test Instruments manufacturer
Order no.: Check-Point-O2+CO2

The Food / Hygiene Meter Check Point is a gas analyzer for measurements on samples such as food packages that were sealed under a protective atmosphere.


- Memory: Yes
- Sensor: O2 / CO2
- Interface: No
- CO2 measuring range: 0 ... 100%

 

Manufacturer: Mocon GmbH
Test Instruments manufacturer
Order no.: Check-Point-O2+CO2-A

The Food / Hygiene Meter Check-Point-O2+CO2 A is a handheld device with compact size for control measurement of food packages that were sealed under the application of a protective atmosphere. The flexible gas line measurement of the Food Gas Analyzer allows easy sampling even in shallow and small packages.


- Memory: Yes
- Sensor: O2 / CO2
- Interface: No
- CO2 measuring range: 0 ... 100%

 

Manufacturer: Mocon GmbH
Test Instruments manufacturer
Order no.: Check-Point-II-O2+CO2

The gas meter Check Point II is a food gas analyzer for measurements on samples such as food packages that were sealed under a protective atmosphere introduction.


- Memory: Yes
- Sensor: O2 / CO2
- O2 measuring range: 0 ... 100%
- Resolution: 0.1%
- In dock station

 

Manufacturer: Mocon GmbH
Test Instruments manufacturer