Digital Multimeter

Digital Multimeter PCE-CM 5
£ 26.00
Price excl. VAT &. delivery
2 year Warranty
The digital multimeter is a multimeter with a multitude of different functions. Thus, with the digital multimeter, current measurements up to 200 A AC can be carried out without contact. This current range of the digital multimeter already covers a large range of current measurements. 

Measurement function:
- AC
- DC
- DC voltage
- AC voltage
- LowZ AC / DC
- Resistance
- Continuity test
- Diode test
- Capacities
- Temperature (type K)
- Frequency (with the current clamp)
- Frequency (during voltage measurement)
- frequency (direct measurement)
- Duty cycle
Digital Multimeter PCE-DC 50
£ 205.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
The digital multimeter PCE-DC 50 is a measuring device for measuring currents of up to 1000 A AC / DC. In addition to current measurement, the digital multimeter can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes. 

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Bluetooth interface
Digital Multimeter PCE-LT 15
£ 62.00
Price excl. VAT &. delivery
2 year Warranty
The digital multimeter PCE-LT 15 is a combination device which detects configuration errors in the network and can be used as a digital multimeter at the same time. Thus, the periphery of a network can be quickly checked with the LAN tester. 

Measuring function:
- AC voltage: 750V
- DC voltage: 1000V
- Resistance: 4 MΩ
- Continuity test: 400 Ω
- Electrical safety: CAT III 600V
Digital Multimeter PCE-ITM 20
£ 336.00
Price excl. VAT &. delivery
2 year Warranty
This digital multimeter PCE-ITM 20 combines a versatile multimeter with an insulation tester. In addition to the usual measured quantities such as voltage, current and resistance, this digital multimeter PCE-ITM 20 is also equipped with a frequency and capacitance measurement.

- Automatic range selection
- Capacitance measurement
- Integrated isolation tester
- Internal memory
- To IEC 1010, CAT III 1000V, CAT IV 600V
- Frequency measurement
Digital Multimeter PCE-123
£ 493.00
Price excl. VAT &. delivery
2 year Warranty

PCE-123 is a digital multimeter used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use multimeter provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the multimeter useful in a wide range of applications.


- DC current: 4 - 20 mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000 V, 0 - 12.000 V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz

 

Digital Multimeter PCE-123-ICA incl. ISO Calibration Certificate
£ 623.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-123 is a digital multimeter used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use multimeter provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the multimeter useful in a wide range of applications.


- DC current: 4 - 20-mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000V, 0 - 12.000V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz
- Incl. ISO Calibration Certificate

Digital Multimeter PCE-CM 3
£ 80.00
Price excl. VAT &. delivery
2 year Warranty
The digital multimeter is used for quick and easy AC measurements. For current measurement, the digital multimeter is plugged over the live conductor. The digital multimeter is particularly suitable for the measurement of alternating current in distributions and wherever circuits must not be interrupted.

- Digital Multimeters up to 200 A
- Compact dimensions
- Robust plastic housing
- Multimeter functions
- Safety conditions: IEC1010-1 (2001)
                             CAT II 1000V
                             CAT III 600V
Mini Digital Multimeter PCE-DC1
£ 68.00
Price excl. VAT &. delivery
2 year Warranty
No-Shopping

The Mini Digital Multimeter has been designed to detect, indirectly, AC/DC current and frequency. The Mini Digital Multimeter has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.


- AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
- DC current:200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
- AC test voltage (without contact):100 VAC to 600 VAC 50 / 60 Hz
- Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

 

Digital Multimeter PCE-DC2
£ 98.00
Price excl. VAT &. delivery
2 year Warranty

Digital Clamp Meter for measuring AC/DC current, AC voltage and resistance. This clamp meter is designed to indirectly detect AC/DC current and ohms. The clamp has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The clamp meter comes manufacturer calibrated and can optionally be certified according to ISO or standards.


- AC / DC current, voltage and resistance measurement
- 3 2/3-digit LCD display
- Power supply: 2 x 1.5V AAA battery
- Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in

 

Digital Multimeter PCE-DC3
£ 107.00
Price excl. VAT &. delivery
2 year Warranty
This digital multimeter was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this digital multimeter.

- AC/DC current, AC voltage and frequency measurement
- AC voltage test (contactless test):
   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
- DCA zero point function
Digital Multimeter PCE-CM 40
£ 169.00
Price excl. VAT &. delivery
2 year Warranty
The flexible digital multimeter PCE-CM 40 is suitable for current measurements up to 3000 A AC. In addition to TRMS current measurement, the flexible digital multimeter PCE-CM 40 can be used to measure inrush currents. The measurement of the current takes place via a flexible Rogowski coil. 

- Measuring range up to 3000 A AC
- LC display
- Inrush function
- Frequency measurement
- Data memory
Digital Multimeter PCE-PCM 1
£ 173.00
Price excl. VAT &. delivery
2 year Warranty

PCE-PCM 1 is a multipurpose digital multimeter or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

- Voltage (50 ... 200 Hz): 100 / 400 / 750V, ± (1.2% + 5 digits)
- Internal memory: Stores up to 99 measurement values
- Includes USB cable and PC software
- Three-phase power measurement
- True RMS

Digital Multimeter PCE-LCT 1
£ 159.00
Price excl. VAT &. delivery
2 year Warranty

Digital Multimeter to test leakage / RMS measurement / continuity and resistance test.


- Measures current up to 100 A
- Measures voltage up to 600 V
- Measures resistance up to 400 O
- Test cables are included

 

Digital Multimeter PCE-DC 41
£ 182.00
Price excl. VAT &. delivery
2 year Warranty

The digital multimeter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the digital multimeter, or you can use the integrated clamp mechanism. By using the clamp of the digital multimeter, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.


- Voltage: 600 V AC/DC
- Current: 600 A AC/DC
- Electrical Resistance: 1000 Ω
- Clamp mechanism

 

Digital Multimeter PCE-CM 3-ICA incl. ISO Calibration Certificate
£ 194.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The digital multimeter is used for quick and easy AC measurements. For current measurement, the digital multimeter is plugged over the live conductor. The digital multimeter is particularly suitable for the measurement of alternating current in distributions and wherever circuits must not be interrupted.

- Digital Multimeters up to 200 A
- Compact dimensions
- Robust plastic housing
- Multimeter functions
- Safety conditions: IEC1010-1 (2001)
                             CAT II 1000V
                             CAT III 600V
- Incl. ISO Calibration Certificate
Digital Multimeter PCE-DC1-ICA Incl. ISO Calibration Certificate
£ 177.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
This Digital Multimeter was developed for the indirect acquisition of AC / DC currents as well as the frequency. A non-contact voltage tester function and a flashlight for illuminating the measuring point were also integrated in this Digital Multimeter.

- AC / DC current, AC voltage and frequency measurement
- Integrated measuring point illumination
- Non-contact voltage tester
- Automatic range selection
- Forceps opening: 18 mm
- Automatic switch-off
- Incl. ISO calibration certificate
Digital Multimeter PCE-CM 40-ICA incl. ISO Calibration Certificate
£ 240.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The flexible digital multimeter PCE-CM 40-ICA is suitable for current measurements up to 3000 A AC. In addition to TRMS current measurement, the flexible digital multimeter PCE-CM 40-ICA can be used to measure inrush currents. The measurement of the current takes place via a flexible Rogowski coil. 

- Measuring range up to 3000 A AC
- LC display
- Inrush function
- Frequency measurement
- Data memory
- Incl. ISO Calibration Certificate
Digital Multimeter PCE-DC2-ICA incl. ISO Calibration Certificate
£ 210.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

Digital Multimeter for measuring AC/DC current, AC voltage and resistance. This digital multimeter is designed to indirectly detect AC/DC current and ohms. The multimeter  has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The multimeter comes manufacturer calibrated and can optionally be certified according to ISO or standards.


- AC / DC current, voltage and resistance measurement
- 3 2/3-digit LCD display
- Power supply: 2 x 1.5V AAA battery
- Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in
- Incl. ISO Calibration Certificate