PCE Instruments

Colorimeter

Order no.: PCE-CSM 1

The handheld portable digital colorimeter PCE-CSM 1 was developed for quality control and offers a high accuracy. When using the colorimeter, you can choose between different color spaces (CIE L*a*b*C*h, CIE L*a*b* and CIE XYZ). After a measurement with the colorimeter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the 100 reference value easily. A 6 mm aperture is used for sample scanning.


- CIE L*a*b*C*h, L*a*b* and XYZ
- automatic white and black calibration
- 8°/d geometry diffused illumination integrating sphere system
- rechargeable Li-ion battery

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RGB2

PCE-RGB2 is a colorimeter for RGB (red, green, blue) or HSL (hue, saturation, luminance) color measurements. The color meter's 45 ° / 0 ° measurement geometry and 16 mm / ≈ 0.63" diameter aperture accommodate standardized color measurement methods on a variety of surfaces. The handheld color-measuring probe is connected to the colorimeter via a 1.5 m / 4.9' long cable, allowing a wide range of motion for the color measurement procedure.


- Measurement geometry: 45° / 0°
- Measurement range: RGB: 0 to 1023 / HSL: 0 to 1.00
- Resolution: 1 for RGB / 0.001 for HS
- Repeatability: < 3 RGB, for a minimum of 1 measurement
- Internal light source can be disabled to measure active light sources 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 2

A very precise Colorimeter with 45°/0° viewing angle. This very professional instrument works in color spaces CIEL*a*b*C*h*, CIEL*a*b*, and CIEXYZ. This kind of color meter is mainly made for the use in an R&D laboratory, for industrial product evaluation, or for any kind of color testing application. The Colorimeter comes fully equipped (click on detail sheet) and is manufacturer calibrated. - A color meter for industrial professionals and researchers -


- Measuring aperture of 8 mm and 45°/0° illumination/viewing angle
- Rechargeable lithium-ion battery
- Auto white black calibration
- Designed specifically for the food industry
- Software Included
- Stores 100 reference values and 20,000 samples

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 4

This Colorimeter is especially designed for meat, food, vegetables or wet products testing. Only the aperture comes into contact with the surfaces to be measured. So it is guaranteed that no liquids can cause cross contamination while doing the measurement. The colorimeter simulates to see surfaces like with human eyes. Used mainly in the medical and food industry the color test instrument in addition meets all requirements for plastics surface measurements (PP, PE, PET, ABS, EVA) and also powders. The color meter is delivered manufacturer calibrated, but can optionally be certified to ISO standards.


- Measuring aperture of 8 mm and 45°/0° illumination/viewing angle
- Rechargeable lithium-ion battery
- Auto white black calibration
- Designed specifically for the food industry
- Software included

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 3

The colorimeter PCE-CSM 3 was developed for quality control and offers a high accuracy. When using the colorimeter, you can choose between different color spaces (CIE L*a*b*C*h, CIE L*a*b*). After a measurement with the colorimeter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily.


- CIE L*a*b*C*h, CIE L*a*b*
- White calibration standard included
- Stores 100 reference values and 20,000 samples
- Measuring aperture is 8 mm
- optional liquid sample kit listed under accessories

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSB 1

PCE-WSB 1 is a portable handheld battery-powered brightness / whiteness colorimeter used to measure the brightness level of paper, cardboard, cellulose, pulp, textiles, paint, enamel, plastic, porcelain, cement, concrete, building materials, chemicals, powders, talc, starch, flour, salt, detergents, cosmetics and other non-metal substances.

- Measures the whiteness degree of blue light (Wb = R457)
- Meets ISO 2470 and ISO 3688 standards
- Compact, lightweight and user-friendly

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 6

The colorimeter PCE-CSM 6 was developed for quality control and offers a high accuracy. When using the colorimeter, you can choose between different color spaces (CIE L*a*b, CIE L*a*b*C*h). After a measurement with the colorimeter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily.


CIE L*a*b*C*h, CIE L*a*b*
- Measuring aperture: Ø8 mm
- optional liquid sample kit listed under accessories
- Storage of 100 reference values and 20,000 samples
- Light sources D65
- Illumination/Viewing Angles 8°/d 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CRM 40

PCE-CRM 40 is a portable handheld colorimeter or spectrophotometer used to accurately measure the correlated color temperature (CCT - in Kelvin), illuminance, chromaticity, excitation purity (Pe), luminous flux (in lumens - lm), RGB and dominant wavelength of light sources such as LED, organic LED (OLED) and other forms of organic electroluminescence (EL).


- Measuring range: 0.1 ... 150,000 lux / 0.01 ... 15,000 foot-candle
- Spectral wavelength range: 360 ... 780 nm
- Display: 3.2" colour LCD
- Chromaticity: Ev xy, Ev u'v'

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 5

The colorimeter PCE-CSM 5 was developed for quality control and offers a high accuracy. When using the colorimeter, you can choose between different color spaces (CIE LAB, XYZ, LCh, RGB, LUV). In addition, the colorimeter PCE-CSM 5 comes with two different measuring apertures (Ø6 mm and Ø10 mm). After a measurement with the colorimeter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily.


- CIE LAB, XYZ, LCh, RGB, LUV
- White calibration
- Storage of 100 reference values and 20,000 samples
- Light sources D65, A, C, D50, F2, F6, F8, F10, F11 and F12
- Exchangeable measuring apertures
- Illumination/Viewing Angles 8°/d and CIE 10°

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 7

PCE-CSM 7 is a portable colorimeter used to measure different spectral parameters. This user-friendly, ergonomically designed colorimeter automatically performs a white and black calibration when powered on. Suitable for manufacturing quality control and assurance as well as product research and development, the colorimeter offers impressive measuring accuracy and comes manufacturer calibrated. An optional ISO calibration certificate can be acquired as an accessory for an additional fee.


- Color spaces: CIEL*a*b*C*h* CIEL*a*b* CIEXYZ CIERGB CIEL*u*v* 
  CIEL*C*h +Yellowness + Whiteness + Color Fastness
- Offers two different measuring apertures
- Three light sources D65, D50, A
- optional liquid sample kit listed under accessories
- Storage of 100 reference values and 20,000 samples
- Illumination/Viewing Angles 8°/d 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TCR 200

The industrial Colorimeter PCE-TCR 200  device carries out an analysis of the color using CIE L*a*b color space. This colorimeter also allows you to determine the colors in the RGB color range. The test instrument is mainly made for use in plating and painting industries. It has three inspection conditions: D65 (daylight), D50, and F11. Also this color meter comes manufacturer calibrated.


- Conversion into LCH, RGB ...
- 8 mm aperture
- 10° Field of view
- White light source
- High repeatability
- Selection of three light sources
- Balancing of white and black objects
- Specular Component Included (SCI)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SIM 50

PCE-SIM 50 is a portable handheld colorimeter, spectrometer or spectral irradiance meter used to assess the accuracy of LED and medical light sources in real time. The spectrometer's measurement functions include illuminance, spectral light spectrum, CIE chromacity (XY & UV), wavelength of light, color temperature (CCT) in Kelvin, color index CRI Ra, SDCN (ANSI standard), and light output in mW / m². The meter's 2048-pixel CCD linear array sensor ensures high quality spectrum measurement.


- Measuring range: 150 ... 600,000 lux, 50 ... 2,100,000 mW / m²
- Wavelength: 350 ... 850 nm
- Internal memory: Stores up to 500,000 measured values

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 8

The colorimeter PCE-CSM 8 was developed for quality control, offers a high accuracy and comes with a 3.5" touch screen display. When using the colorimeter, you can choose between different color spaces (CIE LAB, XYZ, Yxy, LCh, LUV, HunterLAB). After a measurement with the colorimeter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily.


- CIE LAB, XYZ, Yxy, LCh, LUV, HunterLAB
- Black and white calibration
- Determination of reference values and samples
- SCE (specular excluded)
- Measuring aperture of 8 mm and 45°/0° illumination/viewing angle

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 20
PCE-CSM 20 is a handheld spectrophotometer colorimeter used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the PCE-CSM 20 offers a long battery life, a long 4-color lamp life and an easy-to-use portable design. The PCE-CSM 20 covers the full spectrum from 400 to 700 nm in 10 nm increments.

- Measuring geometry: 8° / d
- Integrated sphere size: 48 mm / 1.9 in
- USB cable and software for data transfer
- 2,000 reference standard memory, 20,000 sample memory
- Light source: D65, A, C, D50
- Color ranges: CIE L*a*b, XYZ, Yxy, LCh, CIE LUV, Hunter L*A*B 
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 21
PCE-CSM 21 is a handheld spectrophotometer colorimeter used for high-quality color measurement. Featuring a custom 8/4/1x3 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the PCE-CSM 21 offers a long battery life, a long 9-color lamp life and an easy-to-use portable design. The PCE-CSM 21 covers the full spectrum from 400 to 700 nm in 10 nm increments.

- Measuring geometry: 8° / d
- Integrated sphere size: 48 mm / 1.9 in
- Bluetooth 4.0 and USB cable for data transfer
- 2000 reference standard memory, 20,000 sample memory
- Light sources: D65, A, C, D50, D55, D75, F2, F7, F11
- Color ranges: CIE Lab, XYZ, Yxy, LCh, CIE LUV, Hunter LAB
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 10

The colorimeter PCE-CSM 10 was developed for quality control, offers a high accuracy and comes with a 3.5" touch screen display. When using the colorimeter, you can choose between different color spaces (CIE L*A*B, XYZ, Yxy, LCh, LUV, LAB&WI&YI). After a measurement with the colorimeter, the reading can be used as a reference value while other readings can be recorded as a sample and later be compared to the reference value easily.


- CIE L*A*B, XYZ, Yxy, LCh, LUV, LAB&WI&YI
- Black and white calibration
- Determination of reference values and samples
- 1000 Standards, 15,000 sample memory

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CSM 22
PCE-CSM 22 is a handheld spectrophotometer colorimeter used for high-quality color measurement. Featuring a dual aperture 10/8 mm and 5/4 mm, and including SCI and SCE specular modes for industrial color measuring applications, the PCE-CSM 22 offers a long battery life, a long 18-color lamp with UV light, and an easy-to-use portable design. The PCE-CSM 22 covers the full spectrum from 400 to 700 nm in 10 nm increments.

- Measuring geometry: 8° / d
- Integrated sphere size: 48 mm / 1.9 in
- Bluetooth 4.0 and USB cable for data transfer
- 2000 reference standard memory, 20,000 sample memory
- Illuminant: D65, A, C, D50, D55, D75, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12
- Color ranges: CIE Lab, XYZ, Yxy, LCh, CIE LUV, Hunter LAB
- Combined LED and UV light
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: Capsure

The color detector X-Rite CAPSURE is a portable color meter for very accurate measurements on a number of surfaces and materials. The color detector CAPSURE guarantees an accurate calibration with thousands of colors within electronic color lines. The color detector is easy to handle and user friendly. It recognizes a maximum of 4 colors within the sample area and indicates them as the relevant color and name.


- Measuring geometry offers 45°/0° coverage
- Useful for measuring color on various materials and surfaces
- Features data storage for up to 100 measurements
- RAL Classic, RAL Design and NSC
- Provides even measurement of the smallest sample spaces

 

Manufacturer: active online GmbH
Test Instruments manufacturer
Order no.: MK350S

The LED Colorimeter MK350S is applied to measure LEDs. The LED Colorimeter performs a spectral analysis on light, which is emitted by LEDs. The MK350S LED Colorimeter  measures besides the color spectrum also the illumination level in Lux, the color temperature and many other parameters, that are used for the selection of LEDs.


- Measurement range: 70 ... 70000 Lux
- LED measurement
- Measurement of Color temperature
- Measurement of wave length
- Spectrometer function
- Passive, no active light source

 

Manufacturer: UPRTEK EUROPE
Test Instruments manufacturer
Order no.: 0287.01.31

The Colorimeter Spektromaster 565-45 is especially suitable for quality checks of many devices. The colorimeter has the main advantage of being able to measure color and gloss at the same time.  Samples with the same color but diverging gloss, appear to the human eye not the same, as the glossy surface is perceived as more sated and even darker. Therefore an inspection with the color meter is essential in order to achieve a consistent general picture. The meter comes calibrated by the manufacturer and can be certified to ISO or at any time.


- Measuring range: 400 ... 700 nm
- Resolution: 10 nm
- color: geometry 45°/0°, measuring aperture 11 mm / .4 in
- Gloss: geometry 60°, measuring aperture 5 x 10 mm / .2 x .4 in

 

Manufacturer: Erichsen GmbH & Co. KG
Test Instruments manufacturer