Industrial Measurement Products and Solutions

Clamp on Tester

Order no.: PCE-DC1

Clamp on Tester for measuring AC current, AC voltage, DC current and frequency. The reduced dimensions of this device allow for measurements to be taken in places with limited access. The backlight display ensures that it is easy to read, even in places with limited light available, such as electrical cabinets or in cabling ducts. The Clamp on Tester (as all the test instruments) comes manufacturer calibrated - ISO certification is available as an option.


- AC current (50/60 Hz): 200 A / 0.1 A or 100 mA / ±3.0% + 8 digits
- DC current: 200 A / 100 mA / ±2.8% + 8 digits
- AC test voltage (without contact):100 VAC to 600 VAC at 50 /
  60 Hz
- Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz / 0.51 to 1 kHz

 

Manufacturer: PCE Instruments
£ 39.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DC3

Clamp on Tester to determine indirectly, the AC/DC currents with high accuracy.


- AC current (50 / 60 Hz): 2 A  / 1 mA / ± 2.8 % + 10 dgt
- DC current: 2 A / 1 mA / ± 3.0 % + 10 dgt
- AC overload protection: 100 VAC up to 600 VAC 50 / 60 Hz

 

Manufacturer: PCE Instruments
£ 60.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DC2

Digital Clamp Meter for measuring AC/DC current, AC voltage and resistance. This clamp meter is designed to indirectly detect AC/DC current and ohms. The clamp has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The clamp meter comes manufacturer calibrated and can optionally be certified according to ISO or standards.


- AC / DC current, voltage and resistance measurement
- 3 2/3-digit LCD display
- Power supply: 2 x 1.5V AAA battery
- Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in

 

Manufacturer: PCE Instruments
£ 63.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-LCT 1

Clamp on Tester PCE-LCT 1 to test leakage / RMS measurement / continuity and resistance test. The Clamp on Tester can measure leakage currents which appear when current flows through electrical conductors which are not designed for conduction current. The Clamp on Tester, as all test instruments, is delivered manufacturer calibrated, but can additionally be certified to ISO.


- Measures current up to 100 A
- Measures voltage up to 600 V
- Measures resistance up to 400 O
- Test cables are included

 

Manufacturer: PCE Instruments
£ 100.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-PCM 1

PCE-PCM 1 is a multipurpose clamp-on tester or power analyzer used to measure alternating current (AC), voltage (TRMS) and frequency to determine active (kW), apparent (kVA) and reactive (kVAR) power as well as active energy (kWh) consumption. Both the phase angle and the power factor (cos φ) are shown on the handheld power meter's large and easy-to-read backlit display.

- Voltage (50 ... 200 Hz): 100 / 400 / 750 V, ± (1.2 % + 5 digits)
- Internal memory: Stores up to 99 measurement values
- Includes USB cable and PC software
- Three-phase power measurement
- True RMS

Manufacturer: PCE Instruments
£ 100.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DC 41

The clamp on tester PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 ?. To perform a measurement, you can either use the measuring leads, which are included in the package of the clamp on tester, or you can use the integrated clamp mechanism. By using the clamp of the clamp on tester, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.


- Voltage: 600 V AC/DC
- Current: 600 A AC/DC
- Electrical Resistance: 1000 Ω
- Clamp mechanism

 

Manufacturer: PCE Instruments
£ 108.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CM 4

By using the clamp on tester PCE-CM 4, you are able to perform AC measurements on electrical conductors without having to disconnect them. Just put the flexible clamp of the clamp on tester around the conductor to be measured and start the measurement. The flexible design of the clamp allows measurements even on hard to reach conductors.


- Range: 4 A / 40 A / 400 A AC
- Resolution: 0.001 A / 0.01 A / 0.1 A AC
- Accuracy: ± 3 %
- Easy to use

 

Manufacturer: PCE Instruments
£ 117.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-GPA 62

Clamp on Tester with network Analyzer / Clamp on Tester with data logger. The Clamp on Tester (Graphic Power Quality Analyzer) PCE-GPA 62 is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50? of the harmonic waveform. As all test instruments, the Clamp on Tester is delivered manufacturer calibrated (ISO certification is available optional).


- Voltage measurement: 4.0 ... 600.0 V RMS value ± 0,5 %,
  ± 5 digits / 0,1 V
- Voltage peaks (> 10V): 50 Hz - 60 Hz / ± 5 % ± 50 digits
- Current measurements: 4.0 ... 1500.0 A real ± 1% V. ± 5 digits /
  0,01 A
- Current peaks (> 20A):  50 Hz - 60 Hz / ± 5 % ± 50 digits

 

Manufacturer: PCE Instruments
£ 512.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-360

The PCE-360 is a Clamp-On Tester with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


- Voltage range: 50.0 V ... 600.0 V True RMS value
- Current range: 3.0 A ... 999.9 A True RMS value
- Includes clamps, clips, leads, PC software and data cable

Manufacturer: PCE Instruments
£ 941.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-PA 8000

With the PCE-PA 8000 Clamp on Tester you will be able to perform prolonged measurements of electrical properties. The measurement data is saved in xls format on the included SD card to be easily transferred to a computer or laptop for review. The Clamp on Tester comes manufacturer calibrated and can be certified to ISO or UTIL standards as an option.
- Display: 3.7 in / 94 mm LCD (320 x 240 pixels) with LED backlight
- Electrical properties: AC V, AC A, active power, apparent power, power factor, phase angle, power frequency
- Voltage ranges: 10 V ... 600 V AC, automatic range selection
- Measures current up to 1200 A
- Security / Standards: IEC1010CAT III 600V

Manufacturer: PCE Instruments
£ 1,023.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-830-1

The PCE-830 Clamp on Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Clamp on Tester also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm / 1.1 in diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 mm x 62 mm x 36 mm / 8.2 in x 2.4 in x 1.4 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values (single phase)

Manufacturer: PCE Instruments
£ 1,286.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-830-2

The PCE-830-2 Clamp on Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Clamp on Tester also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


- PCE-830 + PCE-6802 amp clamp (1000 A)
- Electrical conductor pick-up: 55 mm / 2.1 in diameter
- Range selection: manual (10 A, 100 A, 1000 A)
- Clamp dimensions: 244 mm x 97 mm x 46 mm / 9.6 in x 3.7 in x 1.8 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values (single phase)

Manufacturer: PCE Instruments
£ 1,286.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-830-3

The PCE-830-3 Clamp on Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Clamp on Tester also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


- PCE-830 + PCE-3007 flexible amp clamp (3000 A)
- Electrical conductor pick-up: 170 mm / 6.69 in diameter
- Length of electrical conductor: 610 mm / 24.0 in
- Dimensions: 257 mm x 155 mm x 57 mm / 10.1 in x 6.1 in x 2.2 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values - single phase)

Manufacturer: PCE Instruments
£ 1,286.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-PA 8300

The easy-to-use PCE-PA 8300 Clamp-On Tester is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:


- Voltage measurement range of 10 V ... 600 V AC
- Current measurement range of (Set 1) 20 A ... 1200 A AC or (Set 2) 30 A ... 3000 A AC
- Performance measurement range of 0 kW ... 9.999 MW (VA/VAR)

Manufacturer: PCE Instruments
£ 1,492.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: CA-Mini01

Clamp on Tester for multimeter to 150 A AC, ? max. 10 mm, different output signals. The Clamp on Tester of the mini-series impresses with its compact dimensions. The clamp convertor can be used both for currents up to 150 A and for small currents of a few mA. The Clamp on Tester of the mini-series measures the AC reliably and accurately. All test instruments come manufacturer calibrated -  an ISO certificate can be ordered separately.


- Measuring range: 2 ... 150 A
- Accuracy: 2.5%
- Bandwidth: 48 ... 500 Hz

 

Manufacturer: Chauvin Arnoux GmbH
£ 62.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: CA-Mini03

Clamp on Tester for multimeter to 150 A AC, ? max. 10 mm, different output signals. The Clamp on Tester of the mini-series impresses with its compact dimensions. The clamp convertor can be used both for currents up to 150 A and for small currents of a few mA. The Clamp on Tester of the mini-series measures the AC reliably and accurately. All test instruments come manufacturer calibrated -  an ISO certificate can be ordered separately.


- Measuring range: 1 ... 100 A
- Accuracy: 2%
- Bandwidth: 48 ... 500 Hz

 

Manufacturer: Chauvin Arnoux GmbH
£ 62.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: CA-Mini09

Clamp on Tester for multimeter to 150 A AC, ? max. 10 mm, different output signals. The Clamp on Tester of the mini-series impresses with its compact dimensions. The clamp convertor can be used both for currents up to 150 A and for small currents of a few mA. The Clamp on Tester of the mini-series measures the AC reliably and accurately. All test instruments come manufacturer calibrated -  an ISO certificate can be ordered separately.


- Measuring range: 1 ... 150 A
- Accuracy: 4%
- Bandwidth: 48 ... 500 Hz

 

Manufacturer: Chauvin Arnoux GmbH
£ 62.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: CA-Mini05

Current transformers for multimeter to 150 A AC, ? max. 10 mm, different output signals. The Clamp on Tester of the mini-series impresses with its compact dimensions. The clamp convertor can be used both for currents up to 150 A and for small currents of a few mA. The Clamp on Tester of the mini-series measures the AC reliably and accurately. All test instruments come manufacturer calibrated -  an ISO certificate can be ordered separately.


- Measuring range: 0.005 ... 10 A, 1 ... 100 A
- Accuracy: 3%
- Bandwidth: 48 ... 500 Hz

 

Manufacturer: Chauvin Arnoux GmbH
£ 71.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: CA-Mini02

Clamp on Tester for multimeter to 150 A AC, ? max. 10 mm, different output signals. The Clamp on Tester of the mini-series impresses with its compact dimensions. The clamp convertor can be used both for currents up to 150 A and for small currents of a few mA. The Clamp on Tester of the mini-series measures the AC reliably and accurately. All test instruments come manufacturer calibrated -  an ISO certificate can be ordered separately.


- Measuring range: 0.05 ... 100 A
- Accuracy: 1%
- Bandwidth: 48 ... 10 Hz

 

Manufacturer: Chauvin Arnoux GmbH
£ 79.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: CA-MN08

Clamp on Tester for multimeters, oscilloscopes and current faults, max. 200 A AC, max. Diameter 20 mm. The Clamp on Tester MN series offers 3 choices for the output. In addition to AC and AC voltage, a DC voltage output is possible from the Clamp on Tester. The test instrument is sent out manufacturer calibrated - a certification according to ISO standards is available optionally.


- Rated current: 200 A AC
- Transformation ratio: 1,000/1
- Output: isolated Ø 4 mm female sockets

 

Manufacturer: Chauvin Arnoux GmbH
£ 95.00

Price excl. VAT &. delivery
2 year Warranty