Industrial Measurement Products and Solutions

Calibrator

Order no.: PCE-SC 42

PCE-SC 42 is a class 2 acoustic or sound calibrator used to calibrate sound level meters, microphones and noise measuring devices and equipment. Suitable for use with type 2 or class II SPL meters, this portable decibel (db) meter calibrator is easy to use in the field or the laboratory.


- Frequency: 1 kHz / ± 0.1 %
- Sound pressure levels: 94 dB and 114 dB
- Accuracy: ± 0.3 dB (at 20 °C / 68 °F and 760 mm Hg / 101325 Pa)
- Hole opening is 12 mm for sound meter microphone

 

Manufacturer: PCE Instruments
Order no.: PCE-123

PCE-123 is a multifunction calibrator used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use calibrator provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the calibrator useful in a wide range of applications.


- DC current: 4 - 20 mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000 V, 0 - 12.000 V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz

Manufacturer: PCE Instruments
Order no.: PCE-789

Multifunction Calibrator that measures and simulates current and voltage signals and thermocouples / integrates a function generator for specific waveforms / large graphical display with backlight /data logger function.


- Different signals simulation and measurement
- Integrated function generator
- Graphic display with backlight
- Battery powered

 

Manufacturer: PCE Instruments
Order no.: PCE-SC 10

PCE-SC 10 is a class 1 acoustic or sound calibrator used to calibrate microphones, sound pressure level (SPL) meters and other noise measuring devices. Suitable for use with type 1 or class I noise measuring instruments, this portable decibel (db) meter calibrator is easy to use in the field or the laboratory.


- Frequency: 1 kHz / ± 0.5 %
- Sound pressure levels: 94 dB and 114 dB
- Accuracy: ± 0.3 dB

 

Manufacturer: PCE Instruments
Order no.: PCE-VC20

PCE-VC20 is a portable shaker vibration calibrator used to calibrate vibration sensors, meters, analyzers and testers. Suitable for calibrating equipment weighing up to 600 g (1.32 lb), this rechargeable-battery-powered vibration calibrator generates mechanical vibrations with a quartz-stabilized vibration frequency of 159.15 Hz (radian frequency 1000/s).


Load-independent vibration magnitude with an RMS of:
- 10 m/s² vibration acceleration
- 10 mm/s vibration velocity
- 10 µm vibration displacement

 

Manufacturer: PCE Instruments
Order no.: PCE-VC21

PCE-VC21 is a portable shaker vibration calibrator used to calibrate vibration sensors, meters, analyzers and testers. Suitable for calibrating equipment weighing up to 600 g (1.32 lb), this rechargeable-battery-powered vibration calibrator generates mechanical vibrations with adjustable quartz-stabilized vibration frequencies between 15.92 and 1280 Hz and adjustable vibration amplitudes between 1 m/s² and 20 m/s².


- Load-independent vibration magnitude
- 7 adjustable vibration frequencies
- 5 adjustable vibration amplitudes

 

Manufacturer: PCE Instruments
Order no.: METRAHIT MULTICAL

The Multimeter-Calibrator METRAHIT MULTICAL is a combination of measuring transducer and measuring instrument. The combination of these two functions allows the process engineer to use this multimeter calibrator for many purposes.


- Measures and simulates many values
- Dual mode for enter and measure
- Displays measured and simulated values simultaneously
- Frequency and pulse stimulus
- Ramp and step function
- Transmitter simulation (0 … 24 mA sink)

 

Manufacturer: GMC-I Messtechnik GmbH
Order no.: CS 173

The temperature calibrator is used for calibration of contact temperature sensors and infrared meters. A reference sensor can be inserted into a separate bore of the temperature reference source. Due to the built-in PID regulator, with a thin platinum coating, and the use of a 2 point precision inspection (PAC-function), the temperature reference source achieves high precision and reliability. An optional purchasable calibration certificate, based on national standards, verifies the quality of the temperature reference source.


- Temperature range: + 30 °C ... + 200 °C
- Resolution: 0.1 °C
- Precision: ± 0.2 °C

 

Manufacturer: Dostmann electronic GmbH
Order no.: CS 174

The temperature calibrator is used for calibration of contact temperature sensors and infrared meters. A reference sensor can be inserted into a separate bore of the temperature reference source. Due to the built-in PID regulator, with a thin platinum coating, and the use of a 2 point precision inspection (PAC-function), the temperature reference source achieves high precision and reliability. An optional purchasable calibration certificate, based on national standards, verifies the quality of the temperature reference source.


- Temperature range: between -40 °C and + 85 °C
- Resolution: 0.1 °C
- Precision: ± 0.2 °C

 

Manufacturer: Dostmann electronic GmbH
Order no.: CS 175

The temperature calibrator is used for calibration of contact temperature sensors and infrared meters. A reference sensor can be inserted into a separate bore of the temperature reference source. Due to the built-in PID regulator, with a thin platinum coating, and the use of a 2 point precision inspection (PAC-function), the temperature reference source achieves high precision and reliability. An optional purchasable calibration certificate, based on national standards, verifies the quality of the temperature reference source.


- Temperature range: between -40 °C and + 85 °C
- Resolution: 0.01 °C
- Precision: ± 0.05 °C

 

Manufacturer: Dostmann electronic GmbH