Industrial Measurement Products and Solutions

Automotive Tester

Order no.: PCE-T 260
The combination PCE-T 260 is a measuring instrument for use in maintenance, and production. In addition to the stroboscope function, the automotive tester also has the option of removing the rotational contacts and measuring temperatures.

- Optical tachometer
- Measuring range: 5 ... 99999 rpm
- Contact tachometer
- Stroboscope LED
- Temperature measurement: Type K, PT 1000, Infrared
Manufacturer: PCE Instruments
Order no.: PCE-CT 5000

The PCE-CT 5000 Automotive Tester is an instrument for a nondestructive thickness measurement of coatings, such as varnishes, paints, etc. on steel / iron and non-ferrous metals. The extremely wide measuring range of the Automotive Tester goes up to 5000 µm or 200 mils. Gumming or plastic coatings for shock and impact protection can be controlled just as the thin paint coatings.


- Measuring range: 5000 µm / 196.8 mils
- Ferrous metals (Fe)
- Non-ferrous metals (NFe)
- Accuracy: ± 2 % or 2.5 µm / 0.1 mils (the highest value is valid)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 5000-ICA

The PCE-CT 5000 Automotive Tester is an instrument for a nondestructive thickness measurement of coatings, such as varnishes, paints, etc. on steel / iron and non-ferrous metals. The extremely wide measuring range of the Automotive Tester goes up to 5000 µm or 200 mils. Gumming or plastic coatings for shock and impact protection can be controlled just as the thin paint coatings.


- Measuring range: 0 ... 5000 µm / 0 ... 196.8 mils
- Ferrous metals (Fe)
- Non-ferrous metals (NFe)
- Accuracy: ± 2 % or 2.5 µm / 0.1 mils (the highest value is valid)
- incl. ISO Calibration Certificate

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 40

The PCE-CT 40 is a Automotive Tester that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only ferrous metal substrates such as steel. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 0 ... 5000 µm / 200 mil
- Accuracy of ± (1 µm / 0.04 mils + 2 %) of 0 ... 999 µm ( 40 mils) / ± 3.5 % of
  1001 µm to 5000 µm (40 mils ... 200 mils)
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm 

 

Manufacturer: PCE Instruments
Order no.: PCE-CT 40-ICA

The PCE-CT 40 is a Automotive Tester Coating Thickness Gauge that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only ferrous metal substrates such as steel. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 0 ... 5000 µm / 200 mil
- Accuracy of ± (1 µm / 0.04 mils + 2 %) of 0 ... 999 µm ( 40 mils) / ± 3.5 % of
  1001 µm to 5000 µm (40 mils ... 200 mils)
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm
- incl. ISO Calibration Certificate  

 

Calibration certificates are issued specifically for the customer and are excluded from the right of return.

Manufacturer: PCE Instruments
Order no.: PCE-CT 50

PCE-CT 50 is a Automotive Tester that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, copper,  brass, zinc, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils ±3.5 % of
  1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm 

 

Manufacturer: PCE Instruments
Order no.: PCE-CT 50-ICA

PCE-CT 50 is a Automotive Tester Coating Thickness Gauge that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, copper, brass, zinc, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils ±3.5 % of
  1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm
- incl. ISO Calibration Certificate 

 

Calibration certificates are issued specifically for the customer and are excluded from the right of return.

Manufacturer: PCE Instruments
Order no.: PCE-CT 30

The PCE-CT 30 is a Automotive Tester that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on metal substrates such as steel and aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


    - Measuring range of 0 ... 3500 µm / 140 mil
    - Accuracy of ± (1 µm / 0.04 mils + 2 %) of 0 ... 999 µm (40 mils) / ± 3.5 % of
      1001 µm ... 3500 µm (40 mils ... 140 mils)
    - Features a resolution of 0.1 µm / 0.01 mil / 0.01 mm

     

      Manufacturer: PCE Instruments
      Order no.: PCE-CT 30-ICA

      The PCE-CT 30 is an Automotive Tester - Coating Thickness Gauge that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on metal substrates such as steel and aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.

       
      - Measuring range of 0 ... 3500 µm / 140 mil
      - Accuracy of ± (1 µm / 0.04 mils + 2 %) of 0 ... 999 µm (40 mils) / ± 3.5 % of
        1001 µm ... 3500 µm (40 mils ... 140 mils)
      - Features a resolution of 0.1 µm / 0.01 mil / 0.01 mm
      - incl. ISO Calibration Certificate

       

      Calibration certificates are issued specifically for the customer and are excluded from the right of return.

      Manufacturer: PCE Instruments
      Order no.: PCE-AT 5

      The PCE-AT 5 automotive tester / handheld tachometer is a portable device used to measure revolutions per minute (rpm) in one-cylinder two-stroke and eight-cylinder four-stroke combustion engines with electric ignition starters. The PCE-AT 5 handheld automotive tachometer features an easy-to-read, backlit digital LCD display and flashlight functionality for low-light applications.


      - Measurement range: 100 ... 20000 rpm
      - Resolution: 1 rpm
      - Accuracy: ± 10 rpm
      - Measurement interval: 0.5 seconds

       

      Manufacturer: PCE Instruments
      Order no.: PCE-S 40

      The PCE-S 40 is an automotive-testing acoustic stethoscope which amplifies machine noises. An acoustic stethoscope makes it possible to detect noises in bearings, fan flaps, pumps and similar parts. In mechanical engineering, it is used for preventive maintenance to diagnose potential machine faults before they arise.


      - Measuring tip: approx. 16.5 cm
      - Earpieces made of soft plastic
      - Total length: approx. 1 m
      - Tight ear clips

       

      Manufacturer: PCE Instruments
      Order no.: PCE-SG

      PCE-SG is an automotive tester or handheld refractometer used to determine the specific gravity (sg) of electrolyte solution batteries as well as the freezing point of propylene or ethylene glycol-based coolants in degrees Celsius (°C). This refractometer works well for measuring cleaning products too. The instrument also gives indication of the charge level in battery acid.


      Measurement ranges:
         -50 ... 0 °C for coolant or antifreeze
         1.15 ... 1.30 sg for battery acid
         -40 ... 0 °C for cleaner

       

      Manufacturer: PCE Instruments
      Order no.: PCE-S 41

      The PCE-S 41 Mechanics Stethoscope is battery powered and easy to use. This Mechanics Stethoscope can be used for detecting noise in machine components, such as gears, valves, vents, and pumps.


      - Frequency range: 100 Hz to 10 kHz
      - Headphones, 70 mm long sensor, 290 mm long sensor, battery, carrying case
      - Weight: 240 g, with battery
      - Dimensions: 206 mm x 50 mm x 32 mm

       

      Manufacturer: PCE Instruments
      Test Instruments manufacturer
      Order no.: PCE-CT 25

      The PCE-CT 25 Automotive Tester is used for quickly detecting the thickness of metals, such as steel and iron (F) as well as non-ferrous metals (N) in the automotive sector. The PCE-CT 25 Automotive Tester is used to detect damages in cars (the coating thickness of paint can say if the car has suffered any damage) to establish if the car has been in an accident and the resulting value of the car in the used car market.


      - Measurement range: 0 µm ... 1000 µm / 40 mils
      - Resolution: 0.1 mils / 1 µm
      - Display: 3 1/2 digit LCD display
      - Operating conditions: 0 °C ... +50 °C / 32 °F ... 122 °F 

       

      Manufacturer: PCE Instruments
      Order no.: PCE-VE 250
      The Automotive Tester / Borescope PCE-VE 250 is a diagnostic tool with integrated cleaning function. This makes the Automotive Tester / Borescope PCE-VE 250 ideal for use on machine components. The cleaning can be done either with compressed air or compressed air in conjunction with water and or detergents. 


      - Videoscope with cleaning function
      - Diameter camera head: 8.5 mm / 0.33"
      - Cable length: ca. 90 cm / 2ft 11"
      - 3.5" TFT LC-Display
      - 4x optical zoom
      - Viewing angle 60 ° / 
      - 6 white, dimmable LEDs on the camera head 
      - Memory option on Micro SD card
      Manufacturer: PCE Instruments
      Test Instruments manufacturer
      Order no.: PCE-VE 200

      PCE-VE 200 is an industrial inspection camera, endoscope or borescope for the non-destructive evaluation (NDE) of engines, machines and more. This industrial borescope provides excellent image quality at an affordable price. An ideal tool for diagnosing issues in hard-to-reach places, the waterproof camera head features 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.


      - 4.5 mm / 0.18 in diameter, semi-rigid
      - 1 m / 3.28 ft cable length
      - 180° image rotation

       

      Manufacturer: PCE Instruments
      Order no.: PCE-S 42

      The automotive-testing mechanics stethoscope PCE-S 42 is designed for listening to individual machine parts. The industrial stethoscope is used to perform maintenance and repair work. The use of an industrial stethoscope thus facilitates the interception of acoustic phenomena on bearings and motors to prevent failures.


      - Frequency range: 30 Hz ... 15 KHz
      - For preventative maintenance and servicing
      - Sound suppressing headphones included
      - Easy operation
      - Headphones, 70 mm long sensor, 280 mm long sensor, battery, carrying case

       

      Manufacturer: PCE Instruments
      Order no.: PCE-VE 200SV1

      The PCE-VE 200SV1 automotive tester is a nondestructive inspection camera. Thus, the PCE-VE 200SV1 automotive tester is the ideal instrument for diagnosing hard-to-reach areas. Thus, the areas of mechanical engineering, sanitary and heating construction, and the entire construction and construction industry are among the main applications of the automotive tester PCE-VE 200SV1.

      - Camera head diameter 9 mm / 0.4 in.
      - Cable length: 1 m / 3.3 ft 
      - Interface: Micro USB 2.0
      - Memory: Micro SD card
      - Front and side view camera

      Manufacturer: PCE Instruments
      Order no.: PCE-BTT 1

      The Automotive Tester / Belt Force Gauge PCE-BTT 1 is made to detect tension of gear belts. The measurement with the Automotive Tester / belt force gauge is really easy.


      - Measuring range: 0 ... 750 N
      - Display of status: Low, ok, high
      - Maximum of thickness: 36 mm
      - Overload alarm function: 750 N

       

      Manufacturer: PCE Instruments
      Order no.: PCE-VE 200SV3

      The automotive tester PCE-VE 200SV3 is a nondestructive inspection camera. Thus, the automotive tester PCE-VE 200SV3 is the ideal instrument for diagnosis in hard-to-reach places. For example, the areas of mechanical engineering, sanitary and heating engineering, and the entire construction and construction industry are among the main areas of application of the automotive tester PCE-VE 200SV3.

      - Camera head diameter 9 mm / .4 in
      - Cable length: 3 m / 9.9 ft
      - Interface: Micro USB 2.0
      - Memory: Micro SD card
      - Front and side view camera

      Manufacturer: PCE Instruments